chore: Fixes probe run properties and headings (#261)

Signed-off-by: neelanjan00 <[email protected]>

Author: neelanjan00

website/docs/concepts/probes.md

@@ -35,10 +35,10 @@ Some common attributes shared between the Probes:
 
 - **probeTimeout**: Represents the time limit for the probe to execute the check specified and return the expected data.
 - **retry**: The number of times a check is re-run upon failure in the first attempt before declaring the probe status as failed.
-- **interval**: The period between subsequent retries
-- **probePollingInterval**: The time interval for which continuous probe should be sleep after each iteration
-- **initialDelaySeconds**: Represents the initial waiting time interval for the probes.
-- **stopOnFailure**: It can be set to true/false to stop or continue the fault execution after probe fails
+- **interval**: The period between subsequent retries.
+- **probePollingInterval**: The time interval for which continuous probe should be sleep after each iteration.
+- **initialDelay**: Represents the initial waiting time interval for the probes.
+- **stopOnFailure**: It can be set to true/false to stop or continue the fault execution after probe fails.
 
 :::note
 If probe needs any additional RBAC permissions other than the fault's serviceAccount `(<fault-name>-sa)` permissions, then the additional permissions should be provided inside the corresponding Role/ClusterRole bind with the serviceAccount `(<fault-name>-sa)`.
@@ -73,10 +73,10 @@ probe:
           responseCode: '<response code>'
     mode: 'Continuous'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
-      probePollingInterval: 2
+      probePollingInterval: 2s
 ```
 
 The `httpProbe` is better used in the Continuous mode of operation as a parallel liveness indicator of a target or downstream application. It uses the `probePollingInterval` property to specify the polling interval for the access checks.
@@ -104,10 +104,10 @@ probe:
         hostNetwork: false
     mode: 'Edge'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
-      initialDelaySeconds: 5
+      initialDelay: 5s
 ```
 
 > `source.hostNetwork` can be set to `true` to allow access to the node network namespace for the pod executing the probe
@@ -137,8 +137,8 @@ probe:
       operation: 'present' # it can be present, absent, create, delete
     mode: 'EOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -162,8 +162,8 @@ probe:
         value: '<value-for-criteria-match>'
     mode: 'Edge'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -247,8 +247,8 @@ probe:
       source: 'inline'
     mode: 'SOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
   - name: 'probe2'
     type: 'cmdProbe'
@@ -262,8 +262,8 @@ probe:
       source: 'inline'
     mode: 'SOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -921,7 +921,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -967,7 +967,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -990,7 +990,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -1001,7 +1001,7 @@ This section describes the different fields of the litmus probes and the possibl
 <table>
 <tr>
   <th>Field</th>
-  <td><code>.runProperties.initialDelaySeconds</code></td>
+  <td><code>.runProperties.initialDelay</code></td>
 </tr>
 <tr>
   <th>Description</th>
@@ -1013,7 +1013,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>

website/docs/user-guides/chaos-infrastructure-installation.md

@@ -1,7 +1,7 @@
 ---
 id: chaos-infrastructure-installation
-title: chaos-infrastructure-installation
-sidebar_label: chaos-infrastructure-installation
+title: Chaos Infrastructure Installation
+sidebar_label: Chaos Infrastructure Installation
 ---
 
 ---

website/versioned_docs/version-3.0.0/concepts/probes.md

@@ -37,7 +37,7 @@ Some common attributes shared between the Probes:
 - **retry**: The number of times a check is re-run upon failure in the first attempt before declaring the probe status as failed.
 - **interval**: The period between subsequent retries
 - **probePollingInterval**: The time interval for which continuous probe should be sleep after each iteration
-- **initialDelaySeconds**: Represents the initial waiting time interval for the probes.
+- **initialDelay**: Represents the initial waiting time interval for the probes.
 - **stopOnFailure**: It can be set to true/false to stop or continue the fault execution after probe fails
 
 :::note
@@ -73,10 +73,10 @@ probe:
           responseCode: '<response code>'
     mode: 'Continuous'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
-      probePollingInterval: 2
+      probePollingInterval: 2s
 ```
 
 The `httpProbe` is better used in the Continuous mode of operation as a parallel liveness indicator of a target or downstream application. It uses the `probePollingInterval` property to specify the polling interval for the access checks.
@@ -104,10 +104,10 @@ probe:
         hostNetwork: false
     mode: 'Edge'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
-      initialDelaySeconds: 5
+      initialDelay: 5s
 ```
 
 > `source.hostNetwork` can be set to `true` to allow access to the node network namespace for the pod executing the probe
@@ -137,8 +137,8 @@ probe:
       operation: 'present' # it can be present, absent, create, delete
     mode: 'EOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -162,8 +162,8 @@ probe:
         value: '<value-for-criteria-match>'
     mode: 'Edge'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -247,10 +247,10 @@ probe:
       source: 'inline'
     mode: 'SOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
-  - name: 'probe2'
+  - name: 'probe2's
     type: 'cmdProbe'
     cmdProbe/inputs:
       ## probe1's result being used as one of the args in probe2
@@ -262,8 +262,8 @@ probe:
       source: 'inline'
     mode: 'SOT'
     runProperties:
-      probeTimeout: 5
-      interval: 5
+      probeTimeout: 5s
+      interval: 5s
       retry: 1
 ```
 
@@ -921,7 +921,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -967,7 +967,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -990,7 +990,7 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
@@ -1001,7 +1001,7 @@ This section describes the different fields of the litmus probes and the possibl
 <table>
 <tr>
   <th>Field</th>
-  <td><code>.runProperties.initialDelaySeconds</code></td>
+  <td><code>.runProperties.initialDelay</code></td>
 </tr>
 <tr>
   <th>Description</th>
@@ -1013,11 +1013,11 @@ This section describes the different fields of the litmus probes and the possibl
 </tr>
 <tr>
   <th>Range</th>
-  <td>n/a <code>type: integer</code></td>
+  <td>n/a <code>type: string</code></td>
 </tr>
 <tr>
   <th>Notes</th>
-  <td>The <code>.runProperties.initialDelaySeconds</code> represents the initial waiting time interval for the probes.</td>
+  <td>The <code>.runProperties.initialDelay</code> represents the initial waiting time interval for the probes.</td>
 </tr>
 </table>
 

website/versioned_docs/version-3.0.0/user-guides/chaos-infrastructure-installation.md

@@ -1,7 +1,7 @@
 ---
 id: chaos-infrastructure-installation
-title: chaos-infrastructure-installation
-sidebar_label: chaos-infrastructure-installation
+title: Chaos Infrastructure Installation
+sidebar_label: Chaos Infrastructure Installation
 ---
 
 ---