List of extensions NOT working after Forge/Gradio update

[aoleg]

Here is a list of extensions that stopped working after Forge was updated to the latest Gradio.

sd-webui-agent-scheduler , issue
sd-forge-couple
sd-webui-ar ; currently using https://github.com/altoiddealer/--sd-webui-ar-plusplus instead, which has been fixed and works fine
sd-webui-cd-tuner ; currently using https://github.com/Haoming02/sd-webui-vectorscope-cc instead
sd-webui-gelbooru-prompt
sd-webui-tabs-extension fixed in issue
uddetailer now working correctly
sd-webui-vectorscope-cc fixed

[githabtane]

segment anything
inpaint anything
easy prompt selector

[altoiddealer]

Pushed a PR for segment anything continue-revolution/sd-webui-segment-anything#215

[dongxiat]

https://github.com/Haoming02/sd-webui-tabs-extension still work for me

[aoleg]

Thanks! Reinstalling the extension fixed one for me as well. OP updated.

[aoleg]

tabs extension currently broken. Cannot get it to work anymore. UPD: conflicts with uddetailer. With uddetailer enabled, tabs-extension breaks.

[rbrtwtrs]

Also..
Easy Photo,
PBRemTools

[yeyugong]

EbSynth

[githabtane]

The right-click menu will not be displayed with the combination of　LoRA Model Prompt Tool+forge couple
It works if I remove forge couple from the extension

forge couple has been updated and works fine

[aoleg]

Yes, I crossed it out already.

[pinea00]

sd-forge-animatediff
https://github.com/continue-revolution/sd-forge-animatediff.git
sd-forge-ic-light（use fork work normally ）
https://github.com/huchenlei/sd-forge-ic-light.git
openPose editor
https://github.com/fkunn1326/openpose-editor.git

[myrken]

sd-forge-layerdiffuse

version: f0.0.17v1.8.0rc-latest-278-gbfee03d8 not working

version: f0.0.9-latest-51-g5bea443d not working

version: f1.0.2v1.10.1-previous-45-g40dd61ba WORKING but no download available? also no SVD tab in version.

I could only find links to the first 2 versions third was installed before update. So no access to layerdiffusion right now.

[githabtane]

Works with comits from 4 months ago
"https://sorenuts.jp/6549/"
Latest Layer diffuse is only for Gradio 4, comits from 4 months ago is for Gradio 3

[myrken]

Thank you! updating the latest build to version: f1.0.2v1.10.1-previous-47-gf052fabd got it working

[kalle07]

also
supermerger
and
reactor

[coreshock]

As of now, ReActor works fine with Flux

[Bullseye110]

SD-Encrypt-Image: https://github.com/viyiviyi/sd-encrypt-image

[dron28]

deforum

[jd-paucar]

do you know any updates on deforum still not working? ):

[negative1ne]

segment-anything
replacer - https://github.com/light-and-ray/sd-webui-replacer

thats the main ones.

[stripealipe]

Thanks, tried this but I'm still getting an error in the sam.py script - ModuleNotFoundError: No module named 'scripts.dino'

Guessing I'll just wait until these hopefully get fixed at some point. Are all these compatibility problems due to the latest Gradio version?!

[altoiddealer]

Thanks, tried this but I'm still getting an error in the sam.py script - ModuleNotFoundError: No module named 'scripts.dino'

Guessing I'll just wait until these hopefully get fixed at some point. Are all these compatibility problems due to the latest Gradio version?!

I'll have to try reproducing that... I had no such error.

Offhand, I'm going to assume that Forge is failing to set up the extension correctly.

However, A1111 is setting it up correctly.

Personally, I symlink the following directories from my A1111 directory to all my other WebUI directories:

• embeddings
• extensions
• models
• output

Therefore, my Forge setup is running segment_anything after it had already been used 1x (ever) by A1111.

[stripealipe]

Ah ok, maybe that's it.... welp, I guess who needs super clever masking techniques anyways.. I'll do it manually......................... :(

[altoiddealer]

It's pretty simple... just use this in a CMD window replacing the first path (destination) and the second path (source) with your actual paths.

Unless you like having multiple instances of all your extensions?

mklink /d "D:/0_AI/stable-diffusion-webui-forge/extensions" "D:/0_AI/stable-diffusion-webui/extensions"

[stripealipe]

Hey, just wanted to let you know i got this working finally with your patched code, thanks!
Don't think the Controlnet integrations/handoffs are working due to the integrated implementation in Forge, but it's very handy nonetheless. Nice 1!

[obs945]

sd-webui-cd-tuner
sd-webui-faceswaplab
sd-webui-infinite-image-browsing

[tashachan28]

sd-webui-prompt-all-in-one https://github.com/Physton/sd-webui-prompt-all-in-one

[rbrtwtrs]

sd-webui-prompt-all-in-one works fine for me.

[IwoKolasinski]

One Button Prompt

[ScionoicS]

It kind of works. If you select a preset and hit go, it'll use it. But you can't affect anything with custom options

[zffffff]

face editor
ototadana/sd-face-editor#197

[user1x1user]

Depth Library seems to install and load correctly (59dd981) however can't get the selected hand onto the Inpaint image. Tried the Add button and drag and drop.

[Kornifikator]

Same here. What a shame. This extension is sooo useful!

[cha0sbuster]

sd-webui-negpip relied on the old backend model handling to get the information it needs to work, and LDM to function at all.

[ali0une]

Hi there.

https://github.com/novitalabs/sd-webui-cleaner

Removes objects, clean artifacts in image.
Super useful, one of my very favorites.

Unfortunately the canvas is broken with the new Forge version, renders the extension useless.

[DenOfEquity]

try: https://github.com/DenOfEquity/forge2_cleaner
modified to use Gradio4 image components.

[ali0une]

Just tested, works 100%
Many thanks!

[PanduZen]

Regional prompter still broken beacuse

"ModuleNotFoundError: No module named 'ldm'" pls

[bkev]

I can't get the "Prompt Magic" of https://github.com/adieyal/sd-dynamic-prompts to work.

The dynamic prompts and wildcards work, but the "Prompt Magic" throws an error for me

adieyal/sd-dynamic-prompts#815

[FCB-Sunny]

The regional prompter doesn't still working with flux loras.
And of course I tested the regional prompter with stable diffusion loras and the result is not so good but this is active until now.
but in flux, it doesn't run.
I think there is some issue in forge and others are okay?

[driqeks]

ADetailer has this bug with new Forge: Bing-su/adetailer#716

[Elgokoo]

https://github.com/if-ai/IF_prompt_MKR extension to let the AI make prompts for SD using Ollama,

Any update or alternative that works with forge and Ollama ?

[aprisma2008]

Hello great work: stable-diffusion-webui-forge: - thanx a lot for this. Just for info:
I found out that these extensions do not work:

• Segment Anything: https://github.com/continue-revolution/sd-webui-segment-anything
• Promt Generator: https://github.com/imrayya/stable-diffusion-webui-Prompt_Generator
• Promptgen: https://github.com/AUTOMATIC1111/stable-diffusion-webui-promptgen
• Canvas Editor: https://github.com/jtydhr88/sd-canvas-editor

[AnabelleKM]

• config presets: https://github.com/Zyin055/Config-Presets.git

Only available in img2img tab, but not in txt2img tab:

version: [f2.0.1v1.10.1-previous-561-g82eb7566]  •  python: 3.10.6  •  torch: 2.3.1+cu121  •  xformers: 0.0.27  •  gradio: 4.40.0

[dongxiat]

• config presets: https://github.com/Zyin055/Config-Presets.git

version: [f2.0.1v1.10.1-previous-561-g82eb7566]  •  python: 3.10.6  •  torch: 2.3.1+cu121  •  xformers: 0.0.27  •  gradio: 4.40.0

Entering an invalid component ID here will cause this extension to error and not load. Components that do not have a value associated with them, such as tabs and accordions, are not supported.

so if u copy extension from a1111 some additional component with wrong ID make it not work correctly so its not show up

[AnabelleKM]

• config presets: https://github.com/Zyin055/Config-Presets.git

version: [f2.0.1v1.10.1-previous-561-g82eb7566]  •  python: 3.10.6  •  torch: 2.3.1+cu121  •  xformers: 0.0.27  •  gradio: 4.40.0

Entering an invalid component ID here will cause this extension to error and not load. Components that do not have a value associated with them, such as tabs and accordions, are not supported.

so if u copy extension from a1111 some additional component with wrong ID make it not work correctly so its not show up

Hi dongxiat,

I see it works on your end. I found out your comment is a remark from within the file "config_presets.py". I have not changed this file.

Could you help me making it work in txt2img?

[AnabelleKM]

I deleted the file 'config-txt2img-custom-tracked-components.txt', restarted Forge, now it works.

[dongxiat]

some component dont have on Forge... mark it with '#' like me

[JohnneyTexas]

sd-webui-cutoff
sd-webui-enable-checker

[Rabbit-kun]

Is Super Merger working correctly? Or is there an alternative?

Super Merger and Regional Prompter are the only things preventing me from leaving a1111 behind. I saw some hero posted the Regional Prompter (haven't installed it yet, but even if it only works with XL models for now, that's good enough for me).

[SillySilk]

https://github.com/Haoming02/sd-forge-couple is a great substitute for Regional prompter

…

On Mon, Sep 16, 2024 at 11:08 PM PanduZen ***@***.***> wrote: Regional prompter still broken beacuse "ModuleNotFoundError: No module named 'ldm'" pls — Reply to this email directly, view it on GitHub <#888 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AHN7U7YBLWWC5NNXQDDBSNLZW7BPFAVCNFSM6AAAAABLT3IUCOVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANRWGY3DQMY> . You are receiving this because you are subscribed to this thread.Message ID: <lllyasviel/stable-diffusion-webui-forge/repo-discussions/888/comments/10666683 @github.com>

[zeittresor]

https://github.com/AG-w/sd-webui-smea
(i cant get this working (for me) comes up with some error in console and do not show all the experimental "Shovel More Extra Artifacts" (SMEA) Samplers.. (im not sure it was working before the changes in forge))

[SvenErik1968]

Not replacements, but these 2 extensions have a lot of extra samplers including some Euler SMEA-ones:

• https://github.com/MisterChief95/sd-forge-extra-samplers
  • Euler Max
  • Euler Negative
  • Euler Dy
  • Euler Dy Negative
  • Euler SMEA
  • Euler SMEA Dy
  • Euler SMEA Dy Negative
  • Kohaku LoNyu Yog
• https://github.com/DenOfEquity/webUI_ExtraSchedulers
  • Euler a CFG++
  • Euler CFG++
  • Euler Dy CFG++
  • Euler SMEA Dy CFG++
  • Refined Exponential Solver
  • DPM++ 4M SDE
  • +6 new schedulers

[Little-God1983]

https://github.com/kousw/stable-diffusion-webui-daam/tree/forge
Worked fine with previous versions but it seems to much has changed in the Unet/ldm section of forge.