[ARM] Stop gluing ALU nodes to branches / selects

Following #116547 and #116676, this PR changes the type of results and
operands of some nodes to accept / return a normal type instead of Glue.

Unfortunately, changing the result type of one node requires changing
the operand types of all potential consumer nodes, which in turn
requires changing the result types of all other possible producer nodes.
So this is a bulk change.

Author: s-barannikov

llvm/lib/Target/ARM/ARMISelDAGToDAG.cpp

@@ -4123,17 +4123,15 @@ void ARMDAGToDAGISel::Select(SDNode *N) {
     SDValue Chain = N->getOperand(0);
     SDValue N1 = N->getOperand(1);
     SDValue N2 = N->getOperand(2);
-    SDValue N3 = N->getOperand(3);
-    SDValue InGlue = N->getOperand(4);
+    SDValue Flags = N->getOperand(3);
     assert(N1.getOpcode() == ISD::BasicBlock);
     assert(N2.getOpcode() == ISD::Constant);
-    assert(N3.getOpcode() == ISD::Register);
 
     unsigned CC = (unsigned)N2->getAsZExtVal();
 
-    if (InGlue.getOpcode() == ARMISD::CMPZ) {
-      if (InGlue.getOperand(0).getOpcode() == ISD::INTRINSIC_W_CHAIN) {
-        SDValue Int = InGlue.getOperand(0);
+    if (Flags.getOpcode() == ARMISD::CMPZ) {
+      if (Flags.getOperand(0).getOpcode() == ISD::INTRINSIC_W_CHAIN) {
+        SDValue Int = Flags.getOperand(0);
         uint64_t ID = Int->getConstantOperandVal(1);
 
         // Handle low-overhead loops.
@@ -4155,15 +4153,15 @@ void ARMDAGToDAGISel::Select(SDNode *N) {
 
           ReplaceUses(N, LoopEnd);
           CurDAG->RemoveDeadNode(N);
-          CurDAG->RemoveDeadNode(InGlue.getNode());
+          CurDAG->RemoveDeadNode(Flags.getNode());
           CurDAG->RemoveDeadNode(Int.getNode());
           return;
         }
       }
 
       bool SwitchEQNEToPLMI;
-      SelectCMPZ(InGlue.getNode(), SwitchEQNEToPLMI);
-      InGlue = N->getOperand(4);
+      SelectCMPZ(Flags.getNode(), SwitchEQNEToPLMI);
+      Flags = N->getOperand(3);
 
       if (SwitchEQNEToPLMI) {
         switch ((ARMCC::CondCodes)CC) {
@@ -4178,26 +4176,22 @@ void ARMDAGToDAGISel::Select(SDNode *N) {
       }
     }
 
+    SDValue InChain =
+        CurDAG->getCopyToReg(Chain, dl, ARM::CPSR, Flags, SDValue());
+    SDValue InGlue = InChain.getValue(1);
+
     SDValue Tmp2 = CurDAG->getTargetConstant(CC, dl, MVT::i32);
-    SDValue Ops[] = { N1, Tmp2, N3, Chain, InGlue };
-    SDNode *ResNode = CurDAG->getMachineNode(Opc, dl, MVT::Other,
-                                             MVT::Glue, Ops);
-    Chain = SDValue(ResNode, 0);
-    if (N->getNumValues() == 2) {
-      InGlue = SDValue(ResNode, 1);
-      ReplaceUses(SDValue(N, 1), InGlue);
-    }
-    ReplaceUses(SDValue(N, 0),
-                SDValue(Chain.getNode(), Chain.getResNo()));
-    CurDAG->RemoveDeadNode(N);
+    SDValue Ops[] = {N1, Tmp2, CurDAG->getRegister(ARM::CPSR, MVT::i32),
+                     InChain, InGlue};
+    CurDAG->SelectNodeTo(N, Opc, MVT::Other, Ops);
     return;
   }
 
   case ARMISD::CMPZ: {
     // select (CMPZ X, #-C) -> (CMPZ (ADDS X, #C), #0)
     //   This allows us to avoid materializing the expensive negative constant.
-    //   The CMPZ #0 is useless and will be peepholed away but we need to keep it
-    //   for its glue output.
+    //   The CMPZ #0 is useless and will be peepholed away but we need to keep
+    //   it for its flags output.
     SDValue X = N->getOperand(0);
     auto *C = dyn_cast<ConstantSDNode>(N->getOperand(1).getNode());
     if (C && C->getSExtValue() < 0 && Subtarget->isThumb()) {
@@ -4224,19 +4218,19 @@ void ARMDAGToDAGISel::Select(SDNode *N) {
       }
       if (Add) {
         SDValue Ops2[] = {SDValue(Add, 0), CurDAG->getConstant(0, dl, MVT::i32)};
-        CurDAG->MorphNodeTo(N, ARMISD::CMPZ, CurDAG->getVTList(MVT::Glue), Ops2);
+        CurDAG->MorphNodeTo(N, ARMISD::CMPZ, N->getVTList(), Ops2);
       }
     }
     // Other cases are autogenerated.
     break;
   }
 
   case ARMISD::CMOV: {
-    SDValue InGlue = N->getOperand(4);
+    SDValue Flags = N->getOperand(3);
 
-    if (InGlue.getOpcode() == ARMISD::CMPZ) {
+    if (Flags.getOpcode() == ARMISD::CMPZ) {
       bool SwitchEQNEToPLMI;
-      SelectCMPZ(InGlue.getNode(), SwitchEQNEToPLMI);
+      SelectCMPZ(Flags.getNode(), SwitchEQNEToPLMI);
 
       if (SwitchEQNEToPLMI) {
         SDValue ARMcc = N->getOperand(2);
@@ -4253,10 +4247,9 @@ void ARMDAGToDAGISel::Select(SDNode *N) {
         }
         SDValue NewARMcc = CurDAG->getConstant((unsigned)CC, dl, MVT::i32);
         SDValue Ops[] = {N->getOperand(0), N->getOperand(1), NewARMcc,
-                         N->getOperand(3), N->getOperand(4)};
+                         N->getOperand(3)};
         CurDAG->MorphNodeTo(N, ARMISD::CMOV, N->getVTList(), Ops);
       }
-
     }
     // Other cases are autogenerated.
     break;