diff --git a/llvm/docs/HowToUpdateDebugInfo.rst b/llvm/docs/HowToUpdateDebugInfo.rst index d8c300f2f3a70..3088f59c1066a 100644 --- a/llvm/docs/HowToUpdateDebugInfo.rst +++ b/llvm/docs/HowToUpdateDebugInfo.rst @@ -9,7 +9,8 @@ Introduction ============ Certain kinds of code transformations can inadvertently result in a loss of -debug info, or worse, make debug info misrepresent the state of a program. +debug info, or worse, make debug info misrepresent the state of a program. Debug +info availability is also essential for SamplePGO. This document specifies how to correctly update debug info in various kinds of code transformations, and offers suggestions for how to create targeted debug @@ -89,9 +90,14 @@ has a location with an accurate scope attached, and b) to prevent misleading single-stepping (or breakpoint) behavior. Often, merged instructions are memory accesses which can trap: having an accurate scope attached greatly assists in crash triage by identifying the (possibly inlined) function where the bad -memory access occurred. This rule is also meant to assist SamplePGO by banning -scenarios in which a sample of a block containing a merged instruction is -misattributed to a block containing one of the instructions-to-be-merged. +memory access occurred. + +To maintain distinct source locations for SamplePGO, it is often beneficial to +retain an arbitrary but deterministic location instead of discarding line and +column information as part of merging. In particular, loss of location +information for calls inhibit optimizations such as indirect call promotion. +This behavior can be optionally enabled until support for accurately +representing merged instructions in the line table is implemented. Examples of transformations that should follow this rule include: diff --git a/llvm/docs/SourceLevelDebugging.rst b/llvm/docs/SourceLevelDebugging.rst index c1a95efd2d8bc..ef70b86ef8685 100644 --- a/llvm/docs/SourceLevelDebugging.rst +++ b/llvm/docs/SourceLevelDebugging.rst @@ -55,6 +55,8 @@ the stored debug information into source-language specific information. As such, a debugger must be aware of the source-language, and is thus tied to a specific language or family of languages. +.. _intro_consumers: + Debug information consumers --------------------------- @@ -71,6 +73,17 @@ as Visual Studio and WinDBG. LLVM's debug information format is mostly derived from and inspired by DWARF, but it is feasible to translate into other target debug info formats such as STABS. +SamplePGO (also known as `AutoFDO `_) +is a variant of profile guided optimizations which uses hardware sampling based +profilers to collect branch frequency data with low overhead in production +environments. It relies on debug information to associate profile information +to LLVM IR which is then used to guide optimization heuristics. Maintaining +deterministic and distinct source locations is necessary to maximize the +accuracy of mapping hardware sample counts to LLVM IR. For example, DWARF +`discriminators `_ allow +SamplePGO to distinguish between multiple paths of execution which map to the +same source line. + It would also be reasonable to use debug information to feed profiling tools for analysis of generated code, or, tools for reconstructing the original source from generated code. diff --git a/llvm/lib/IR/DebugInfoMetadata.cpp b/llvm/lib/IR/DebugInfoMetadata.cpp index f975d4ca33ad9..fde7d12016f0c 100644 --- a/llvm/lib/IR/DebugInfoMetadata.cpp +++ b/llvm/lib/IR/DebugInfoMetadata.cpp @@ -21,6 +21,7 @@ #include "llvm/IR/IntrinsicInst.h" #include "llvm/IR/Type.h" #include "llvm/IR/Value.h" +#include "llvm/Support/CommandLine.h" #include #include @@ -34,6 +35,12 @@ cl::opt EnableFSDiscriminator( cl::desc("Enable adding flow sensitive discriminators")); } // namespace llvm +// When true, preserves line and column number by picking one of the merged +// location info in a deterministic manner to assist sample based PGO. +static cl::opt PickMergedSourceLocations( + "pick-merged-source-locations", cl::init(false), cl::Hidden, + cl::desc("Preserve line and column number when merging locations.")); + uint32_t DIType::getAlignInBits() const { return (getTag() == dwarf::DW_TAG_LLVM_ptrauth_type ? 0 : SubclassData32); } @@ -125,6 +132,20 @@ DILocation *DILocation::getMergedLocation(DILocation *LocA, DILocation *LocB) { if (LocA == LocB) return LocA; + // For some use cases (SamplePGO), it is important to retain distinct source + // locations. When this flag is set, we choose arbitrarily between A and B, + // rather than computing a merged location using line 0, which is typically + // not useful for PGO. + if (PickMergedSourceLocations) { + auto A = std::make_tuple(LocA->getLine(), LocA->getColumn(), + LocA->getDiscriminator(), LocA->getFilename(), + LocA->getDirectory()); + auto B = std::make_tuple(LocB->getLine(), LocB->getColumn(), + LocB->getDiscriminator(), LocB->getFilename(), + LocB->getDirectory()); + return A < B ? LocA : LocB; + } + LLVMContext &C = LocA->getContext(); using LocVec = SmallVector; diff --git a/llvm/test/DebugInfo/pick-merged-source-locations.ll b/llvm/test/DebugInfo/pick-merged-source-locations.ll new file mode 100644 index 0000000000000..2a9387e039232 --- /dev/null +++ b/llvm/test/DebugInfo/pick-merged-source-locations.ll @@ -0,0 +1,77 @@ +;; This test verifies that we assign a deterministic location for merged +;; instructions when -pick-merged-source-locations is enabled. We use the +;; simplifycfg pass to test this behaviour since it was a common source of +;; merged instructions, however we intend this to apply to all users of the +;; getMergedLocation API. + +;; Run simplifycfg and check that only 1 call to bar remains and it's debug +;; location has a valid line number (lexicographically smallest). +; RUN: opt %s -passes=simplifycfg -hoist-common-insts -pick-merged-source-locations -S | FileCheck %s --check-prefix=ENABLED +; ENABLED: call i32 @bar{{.*!dbg !}}[[TAG:[0-9]+]] +; ENABLED-NOT: call i32 @bar +; ENABLED: ![[TAG]] = !DILocation(line: 9, column: 16, scope: !9) + +;; Run simplifycfg without the pass to ensure that we don't spuriously start +;; passing the test if simplifycfg behaviour changes. +; RUN: opt %s -passes=simplifycfg -hoist-common-insts -pick-merged-source-locations=false -S | FileCheck %s --check-prefix=DISABLED +; DISABLED: call i32 @bar{{.*!dbg !}}[[TAG:[0-9]+]] +; DISABLED-NOT: call i32 @bar +; DISABLED: ![[TAG]] = !DILocation(line: 0, scope: !9) + +; ModuleID = '../llvm/test/DebugInfo/Inputs/debug-info-merge-call.c' +source_filename = "../llvm/test/DebugInfo/Inputs/debug-info-merge-call.c" +target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128" +target triple = "x86_64-unknown-linux-gnu" + +; Function Attrs: nounwind uwtable +define dso_local i32 @test(i32 %n) !dbg !9 { +entry: + %call = call i32 @foo(i32 %n), !dbg !12 + %cmp1 = icmp sgt i32 %n, 100, !dbg !13 + br i1 %cmp1, label %if.then, label %if.else, !dbg !13 + +if.then: ; preds = %entry + %call2 = call i32 @bar(i32 %n), !dbg !14 + %add = add nsw i32 %call2, %call, !dbg !15 + br label %if.end, !dbg !16 + +if.else: ; preds = %entry + %call4 = call i32 @bar(i32 %n), !dbg !17 + br label %if.end + +if.end: ; preds = %if.else, %if.then + %r.0 = phi i32 [ %add, %if.then ], [ %call4, %if.else ], !dbg !18 + ret i32 %r.0, !dbg !19 +} + +declare !dbg !20 i32 @foo(i32) + +declare !dbg !21 i32 @bar(i32) + +!llvm.dbg.cu = !{!0} +!llvm.module.flags = !{!2, !3, !4, !5, !6, !7} +!llvm.ident = !{!8} + +!0 = distinct !DICompileUnit(language: DW_LANG_C11, file: !1, producer: "clang version 21.0.0git (git@github.com:snehasish/llvm-project.git 6ce41db6b0275d060d6e60f88b96a1657024345c)", isOptimized: true, runtimeVersion: 0, emissionKind: LineTablesOnly, splitDebugInlining: false, nameTableKind: None) +!1 = !DIFile(filename: "../llvm/test/DebugInfo/Inputs/debug-info-merge-call.c", directory: "/usr/local/google/home/snehasishk/working/llvm-project/build-assert", checksumkind: CSK_MD5, checksum: "ac1be6c40dad11691922d600f9d55c55") +!2 = !{i32 7, !"Dwarf Version", i32 5} +!3 = !{i32 2, !"Debug Info Version", i32 3} +!4 = !{i32 1, !"wchar_size", i32 4} +!5 = !{i32 8, !"PIC Level", i32 2} +!6 = !{i32 7, !"PIE Level", i32 2} +!7 = !{i32 7, !"uwtable", i32 2} +!8 = !{!"clang version 21.0.0git (git@github.com:snehasish/llvm-project.git 6ce41db6b0275d060d6e60f88b96a1657024345c)"} +!9 = distinct !DISubprogram(name: "test", scope: !1, file: !1, line: 5, type: !10, scopeLine: 5, flags: DIFlagPrototyped | DIFlagAllCallsDescribed, spFlags: DISPFlagDefinition | DISPFlagOptimized, unit: !0) +!10 = !DISubroutineType(types: !11) +!11 = !{} +!12 = !DILocation(line: 7, column: 13, scope: !9) +!13 = !DILocation(line: 8, column: 8, scope: !9) +!14 = !DILocation(line: 9, column: 16, scope: !9) +!15 = !DILocation(line: 9, column: 14, scope: !9) +!16 = !DILocation(line: 10, column: 3, scope: !9) +!17 = !DILocation(line: 11, column: 10, scope: !9) +!18 = !DILocation(line: 0, scope: !9) +!19 = !DILocation(line: 13, column: 3, scope: !9) +!20 = !DISubprogram(name: "foo", scope: !1, file: !1, line: 2, type: !10, flags: DIFlagPrototyped, spFlags: DISPFlagOptimized) +!21 = !DISubprogram(name: "bar", scope: !1, file: !1, line: 1, type: !10, flags: DIFlagPrototyped, spFlags: DISPFlagOptimized) +