ESP32CAM internal SD-Card print

[FROeHlyEisvogel]

Hello together,
first I would like to thank you for this great project.
I was able to install the ESP3D on an ESP32CAM module and conntect it to my Anycubic i3 Mega printer with Marlin.
I am able to read/write commands, see the camera, access the printer settings, so everything is working.
On extra SD I can see the files stored on the SD-Card in the printer and could start them.

What I am not able to do right now is printing files which are stored on the SD-Card inserted to the ESP32CAM module.
The play button is just missing.
I wonder if this is not possible at all or if I did miss some configuration.

For me the ESP32CAM module is like made for ESP3D because you have everything you could need in one module.

[luc-github]

For me the ESP32CAM module is like made for ESP3D because you have everything you could need in one module.

Not really : https://esp3d.io/ESP3D/Version_3.X/documentation/sdtransfer/

esp3d do not stream gcode yet, and when it will do, esp32 cam may not be able to stream in same time as gcode is streaming - it is limited chip not a pc, it will focus on streaming then or blob will happen

On esp32 cam the SD is not visible from printer so it cannot acces to it

[FROeHlyEisvogel]

Okay thats a little bit sad because I really hoped for this feature.
Is it possible to connect the ESP32CAM module SD-Connector paralell to the Anycubic SD-Card?
I cant find documentation about that. Looks like this only works for some special boards?

[luc-github]

it need hardware solution to share pins, 2 devices cannot acces in same time to sd card , will have collision
current solution = use wifi sdcard and mount the http interface in one esp3d-webui panel as external content