0.8.154 release

Author: lumapu

src/CHANGES.md

@@ -1,54 +1,19 @@
-Changelog v0.8.140
+Changelog v0.8.154
 
-* added HMS-400-1T support (serial number 1125...)
-* added further ESP8266 versions (-all, -minimal) because of small ressources on ESP8266
-* added some Gridprofiles
-* added support for characters in serial number of inverter (A-F)
-* added default coordinates on fresh install, needed for history graph on display and WebUI
-* added option to reset values on communication start (sunrise)
-* added max inverter temperature to WebUI
-* added yield day to history graph
-* added script and [instructions](../manual/factory_firmware.md) how to generate factory firmware which includes predefined settings
-* added button for downloading coredump (ESP32 variants only) to `/system`. Once a crash happens the reason can be checked afterwards (even after a reboot)
-* added support of HERF inverters, serial number is converted in Javascript
-* added device name to HTML title
-* added feature to restart Ahoy using MqTT
-* added feature to publish MqTT messages as JSON as well (new setting)
-* add timestamp to JSON output
-* improved communication to inverter
-* improved translation to German
-* improved HTML pages, reduced in size by only including relevant contents depending by chip type
-* improved history graph in WebUI
-* improved network routines
-* improved Wizard
-* improved WebUI by disabling upload and import buttons when no file is selected
-* improved queue, only add new object once they not exist in queue
-* improved MqTT `OnMessage` (threadsafe)
-* improved read of alarms, prevent duplicates, update alarm time if there is an update
-* improved alarms are now sorted in ascending direction
-* improved by prevent add inverter multiple times
-* improved sending active power controll commands
-* improved refresh routine of ePaper, full refresh each 12h
-* redesigned WebUI on `/system`
-* changed MqTT retained flags
-* change MqTT return value of power limit acknowledge from `boolean` to `float`. The value returned is the same as it was set to confirm reception (not the read back value)
-* converted ePaper and Ethernet to hal-SPI
-* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed
-* changed: Ethernet variants (W5500) now support WiFi as fall back / configuration
-* switch AsyncWebserver library
-* fixed autodiscovery for homeassistant
-* fix reset values functionality
-* fix read back of active power control value, now it has one decimal place
-* fix NTP issues
-* fixed MqTT discovery field `ALARM_MES_ID`
-* fix close button color of modal windows in dark mode
-* fixed calculation of max AC power
-* fixed reset values at midnight if WiFi isn't available
-* fixed HMT-1800-4T number of inputs
-* fix crash if invalid serial number was set -> inverter will be disabled automatically
-* fixed ESP8266, ESP32 static IP
-* fixed ethernet MAC address read back
-* update several libraries to more recent versions
-* removed `yield efficiency` because the inverter already calculates correct
+* fix display IP in ePaper display (ETH or WiFi, static or DHCP)
+* fix German translation
+* fix NTP lookup if internet connection is not there
+* fix MqTT discovery total
+* fix redirect after login
+* added fallback for NTP to gateway IP
+* added button for CMT inverters to catch them independend on which frequency they were before
+*  added update warning once 0.9.x should be installed -> not possible using OTA because of changed partition layout
+* improved CMT communication
+* improved rssi display, if inverter isn't available, display '-- dBm'
+* improved sending limits of multiple inverters in very short timeframe
+* improved communication general
+* improved communication, don't interrupt current command by setting a new limit
+* increased maximum number of alarms to 50 for ESP32
+* updated libraries
 
-full version log: [Development Log](https://github.com/lumapu/ahoy/blob/development03/src/CHANGES.md)
+full version log: [Development Log](https://github.com/lumapu/ahoy/blob/development03/src/CHANGES.md)

src/defines.h

@@ -13,7 +13,7 @@
 //-------------------------------------
 #define VERSION_MAJOR       0
 #define VERSION_MINOR       8
-#define VERSION_PATCH       140
+#define VERSION_PATCH       154
 //-------------------------------------
 typedef struct {
     uint8_t ch;