Skip to content

Commit 65a0b7a

Browse files
lupyuenlupyuen
committed
Testing debug
1 parent 335c135 commit 65a0b7a

File tree

12 files changed

+193
-66
lines changed

12 files changed

+193
-66
lines changed

‎.vscode/launch-gd32vf103.json‎

Lines changed: 2 additions & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -20,7 +20,8 @@
2020
"set breakpoint pending on",
2121

2222
// Launch OpenOCD
23-
"target remote | openocd/bin/openocd -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/flash-init.ocd -f interface/cmsis-dap.cfg -f scripts/gd32vf103/gd32vf103.ocd -f scripts/gd32vf103/debug.ocd ",
23+
// "target remote | openocd/bin/openocd -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/flash-init.ocd -f interface/cmsis-dap.cfg -f scripts/gd32vf103/gd32vf103.ocd -f scripts/gd32vf103/debug.ocd ",
24+
"target remote | riscv-openocd/src/openocd -s riscv-openocd/tcl -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/debug.ocd ",
2425

2526
// After loading the Application, run these gdb commands. The Application ELF image does not contain a valid Image Header.
2627
// "monitor reset halt",

‎.vscode/launch.json‎

Lines changed: 2 additions & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -20,7 +20,8 @@
2020
"set breakpoint pending on",
2121

2222
// Launch OpenOCD
23-
"target remote | openocd/bin/openocd -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/flash-init.ocd -f interface/cmsis-dap.cfg -f scripts/gd32vf103/gd32vf103.ocd -f scripts/gd32vf103/debug.ocd ",
23+
// "target remote | openocd/bin/openocd -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/flash-init.ocd -f interface/cmsis-dap.cfg -f scripts/gd32vf103/gd32vf103.ocd -f scripts/gd32vf103/debug.ocd ",
24+
"target remote | riscv-openocd/src/openocd -s riscv-openocd/tcl -c \"gdb_port pipe; log_output openocd.log\" -f scripts/gd32vf103/debug.ocd ",
2425

2526
// After loading the Application, run these gdb commands. The Application ELF image does not contain a valid Image Header.
2627
// "monitor reset halt",

‎openocd.log‎

Lines changed: 117 additions & 26 deletions
Original file line numberDiff line numberDiff line change
@@ -1,26 +1,117 @@
1-
debug_level: 2
2-
adapter speed: 1000 kHz
3-
srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
4-
adapter_nsrst_assert_width: 100
5-
riscv.flash
6-
debug_level: 2
7-
Warn : Transport "jtag" was already selected
8-
Info : Listening on port 6666 for tcl connections
9-
Info : Listening on port 4444 for telnet connections
10-
Info : CMSIS-DAP: SWD Supported
11-
Info : CMSIS-DAP: JTAG Supported
12-
Info : CMSIS-DAP: FW Version = 2.0.0
13-
Info : CMSIS-DAP: Interface Initialised (JTAG)
14-
Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 0 nTRST = 0 nRESET = 1
15-
Info : CMSIS-DAP: Interface ready
16-
Info : clock speed 1000 kHz
17-
Info : cmsis-dap JTAG TLR_RESET
18-
Info : cmsis-dap JTAG TLR_RESET
19-
Info : JTAG tap: riscv.cpu tap/device found: 0x1000563d (mfg: 0x31e (Andes Technology Corporation), part: 0x0005, ver: 0x1)
20-
Info : JTAG tap: auto0.tap tap/device found: 0x790007a3 (mfg: 0x3d1 (GigaDevice Semiconductor (Beijing)), part: 0x9000, ver: 0x7)
21-
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -irlen 5 -expected-id 0x790007a3"
22-
Info : datacount=4 progbufsize=2
23-
Info : Examined RISC-V core; found 1 harts
24-
Info : hart 0: XLEN=32, misa=0x40901105
25-
Info : accepting 'gdb' connection from pipe
26-
Info : dropped 'gdb' connection
1+
User : 15 3 command.c:544 command_print(): debug_level: 4
2+
Debug: 16 3 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000
3+
Debug: 17 3 command.c:143 script_debug(): command - adapter_khz ocd_adapter_khz 1000
4+
Debug: 19 3 core.c:1645 jtag_config_khz(): handle jtag khz
5+
Debug: 20 3 core.c:1612 adapter_khz_to_speed(): convert khz to interface specific speed value
6+
Debug: 21 3 core.c:1612 adapter_khz_to_speed(): convert khz to interface specific speed value
7+
User : 22 3 command.c:544 command_print(): adapter speed: 1000 kHz
8+
Debug: 23 3 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only
9+
Debug: 24 4 command.c:143 script_debug(): command - reset_config ocd_reset_config srst_only
10+
User : 26 4 command.c:544 command_print(): srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
11+
Debug: 27 4 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_adapter_nsrst_assert_width 100
12+
Debug: 28 4 command.c:143 script_debug(): command - adapter_nsrst_assert_width ocd_adapter_nsrst_assert_width 100
13+
User : 30 4 command.c:544 command_print(): adapter_nsrst_assert_width: 100
14+
Debug: 31 4 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_interface cmsis-dap
15+
Debug: 32 4 command.c:143 script_debug(): command - interface ocd_interface cmsis-dap
16+
Debug: 34 4 command.c:364 register_command_handler(): registering 'ocd_cmsis-dap'...
17+
Debug: 35 4 command.c:364 register_command_handler(): registering 'ocd_cmsis-dap'...
18+
Debug: 36 4 command.c:364 register_command_handler(): registering 'ocd_cmsis_dap_vid_pid'...
19+
Debug: 37 4 command.c:364 register_command_handler(): registering 'ocd_cmsis_dap_serial'...
20+
Debug: 38 4 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_transport select jtag
21+
Debug: 39 4 command.c:143 script_debug(): command - ocd_transport ocd_transport select jtag
22+
Debug: 40 4 command.c:364 register_command_handler(): registering 'ocd_jtag_flush_queue_sleep'...
23+
Debug: 41 4 command.c:364 register_command_handler(): registering 'ocd_jtag_rclk'...
24+
Debug: 42 4 command.c:364 register_command_handler(): registering 'ocd_jtag_ntrst_delay'...
25+
Debug: 43 4 command.c:364 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'...
26+
Debug: 44 4 command.c:364 register_command_handler(): registering 'ocd_scan_chain'...
27+
Debug: 45 4 command.c:364 register_command_handler(): registering 'ocd_jtag_reset'...
28+
Debug: 46 4 command.c:364 register_command_handler(): registering 'ocd_runtest'...
29+
Debug: 47 4 command.c:364 register_command_handler(): registering 'ocd_irscan'...
30+
Debug: 48 4 command.c:364 register_command_handler(): registering 'ocd_verify_ircapture'...
31+
Debug: 49 4 command.c:364 register_command_handler(): registering 'ocd_verify_jtag'...
32+
Debug: 50 4 command.c:364 register_command_handler(): registering 'ocd_tms_sequence'...
33+
Debug: 51 4 command.c:364 register_command_handler(): registering 'ocd_wait_srst_deassert'...
34+
Debug: 52 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
35+
Debug: 53 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
36+
Debug: 54 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
37+
Debug: 55 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
38+
Debug: 56 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
39+
Debug: 57 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
40+
Debug: 58 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
41+
Debug: 59 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
42+
Debug: 60 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
43+
Debug: 61 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
44+
Debug: 62 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
45+
Debug: 63 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
46+
Debug: 64 4 command.c:364 register_command_handler(): registering 'ocd_jtag'...
47+
Debug: 65 4 command.c:364 register_command_handler(): registering 'ocd_svf'...
48+
Debug: 66 4 command.c:364 register_command_handler(): registering 'ocd_xsvf'...
49+
Debug: 67 4 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_jtag newtap riscv cpu -irlen 5 -expected-id 0x1000563d
50+
Debug: 68 4 command.c:143 script_debug(): command - ocd_jtag ocd_jtag newtap riscv cpu -irlen 5 -expected-id 0x1000563d
51+
Debug: 69 4 tcl.c:550 jim_newtap_cmd(): Creating New Tap, Chip: riscv, Tap: cpu, Dotted: riscv.cpu, 4 params
52+
Debug: 70 5 tcl.c:574 jim_newtap_cmd(): Processing option: -irlen
53+
Debug: 71 5 tcl.c:574 jim_newtap_cmd(): Processing option: -expected-id
54+
Debug: 72 5 core.c:1304 jtag_tap_init(): Created Tap: riscv.cpu @ abs position 0, irlen 5, capture: 0x1 mask: 0x3
55+
Debug: 73 5 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_target create riscv.cpu riscv -chain-position riscv.cpu
56+
Debug: 74 5 command.c:143 script_debug(): command - ocd_target ocd_target create riscv.cpu riscv -chain-position riscv.cpu
57+
Debug: 75 5 target.c:1929 target_free_all_working_areas_restore(): freeing all working areas
58+
Debug: 76 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
59+
Debug: 77 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
60+
Debug: 78 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
61+
Debug: 79 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
62+
Debug: 80 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
63+
Debug: 81 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
64+
Debug: 82 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
65+
Debug: 83 5 command.c:364 register_command_handler(): registering 'ocd_riscv'...
66+
Debug: 84 5 command.c:364 register_command_handler(): registering 'ocd_arm'...
67+
Debug: 85 5 command.c:364 register_command_handler(): registering 'ocd_arm'...
68+
Debug: 86 5 command.c:364 register_command_handler(): registering 'ocd_arm'...
69+
Debug: 87 5 command.c:364 register_command_handler(): registering 'ocd_arm'...
70+
Debug: 88 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
71+
Debug: 89 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
72+
Debug: 90 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
73+
Debug: 91 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
74+
Debug: 92 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
75+
Debug: 93 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
76+
Debug: 94 5 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
77+
Debug: 95 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
78+
Debug: 96 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
79+
Debug: 97 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
80+
Debug: 98 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
81+
Debug: 99 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
82+
Debug: 100 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
83+
Debug: 101 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
84+
Debug: 102 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
85+
Debug: 103 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
86+
Debug: 104 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
87+
Debug: 105 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
88+
Debug: 106 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
89+
Debug: 107 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
90+
Debug: 108 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
91+
Debug: 109 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
92+
Debug: 110 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
93+
Debug: 111 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
94+
Debug: 112 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
95+
Debug: 113 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
96+
Debug: 114 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
97+
Debug: 115 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
98+
Debug: 116 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
99+
Debug: 117 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
100+
Debug: 118 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
101+
Debug: 119 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
102+
Debug: 120 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
103+
Debug: 121 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
104+
Debug: 122 6 command.c:364 register_command_handler(): registering 'ocd_riscv.cpu'...
105+
Debug: 123 6 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_riscv.cpu configure -work-area-phys 0x20000000 -work-area-size 20480 -work-area-backup 0
106+
Debug: 124 6 command.c:143 script_debug(): command - ocd_riscv.cpu ocd_riscv.cpu configure -work-area-phys 0x20000000 -work-area-size 20480 -work-area-backup 0
107+
Debug: 125 6 target.c:1929 target_free_all_working_areas_restore(): freeing all working areas
108+
Debug: 126 6 target.c:1929 target_free_all_working_areas_restore(): freeing all working areas
109+
Debug: 127 6 target.c:1929 target_free_all_working_areas_restore(): freeing all working areas
110+
Debug: 128 6 command.c:143 script_debug(): command - ocd_command ocd_command type ocd_flash bank riscv.flash gd32vf103 0x08000000 0 0 0 riscv.cpu
111+
Debug: 129 6 command.c:143 script_debug(): command - ocd_flash ocd_flash bank riscv.flash gd32vf103 0x08000000 0 0 0 riscv.cpu
112+
Error: 131 6 tcl.c:1115 handle_flash_bank_command(): flash driver 'gd32vf103' not found
113+
Debug: 132 7 command.c:645 run_command(): Command 'bank' failed with error code -4
114+
User : 133 7 command.c:708 command_run_line():
115+
Debug: 134 7 riscv.c:270 riscv_deinit_target(): riscv_deinit_target()
116+
Error: 135 7 riscv.c:233 get_target_type(): Target has not been initialized
117+
Debug: 136 7 target.c:1929 target_free_all_working_areas_restore(): freeing all working areas

‎riscv-openocd‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1 @@
1+
Subproject commit caec15c824a32e8befaa964842d11f7f8cd6dacb

‎scripts/gd32vf103/debug.ocd‎

Lines changed: 49 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -1,17 +1,62 @@
1-
# This is an OpenOCD script that connects to the nRF52 for Cortex Debug.
1+
# OpenOCD script for debugger
22

33
# Debug Level must be 2 or greater or gdb will fail.
44
debug_level 2
5+
# debug_level 4
56

67
# Select JTAG transport
7-
transport select jtag
8+
# transport select jtag
89

9-
$_TARGETNAME configure -event reset-init {
10-
}
10+
# $_TARGETNAME configure -event reset-init {
11+
# }
1112

1213
# Connect to the MCU
1314
# init
1415

1516
# Restart the device and halt
1617
# echo "Restarting..."
1718
# reset halt
19+
20+
# From https://github.com/Tencent/TencentOS-tiny/blob/master/doc/RISC-V%20eclipse%20%E5%BC%80%E5%8F%91%E7%8E%AF%E5%A2%83%E6%90%AD%E5%BB%BA.md
21+
22+
adapter_khz 1000
23+
reset_config srst_only
24+
adapter_nsrst_assert_width 100
25+
26+
interface cmsis-dap
27+
28+
transport select jtag
29+
30+
#autoexit true
31+
32+
set _CHIPNAME riscv
33+
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x1000563d
34+
35+
set _TARGETNAME $_CHIPNAME.cpu
36+
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
37+
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 20480 -work-area-backup 0
38+
39+
40+
# Work-area is a space in RAM used for flash programming
41+
if { [info exists WORKAREASIZE] } {
42+
set _WORKAREASIZE $WORKAREASIZE
43+
} else {
44+
set _WORKAREASIZE 0x5000
45+
}
46+
47+
# Allow overriding the Flash bank size
48+
if { [info exists FLASH_SIZE] } {
49+
set _FLASH_SIZE $FLASH_SIZE
50+
} else {
51+
# autodetect size
52+
set _FLASH_SIZE 0
53+
}
54+
55+
# flash size will be probed
56+
set _FLASHNAME $_CHIPNAME.flash
57+
58+
####TODO flash bank bin/targets/gd32vf103c-start_my_sensor/app/apps/my_sensor_app/my_sensor_app.img gd32vf103 0x08001000 0 0 0 $_TARGETNAME
59+
riscv set_reset_timeout_sec 1
60+
init
61+
62+
halt

‎scripts/gd32vf103/flash-app.cmd‎

Lines changed: 0 additions & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -3,6 +3,5 @@
33
openocd\bin\openocd.exe ^
44
-f scripts/gd32vf103/flash-init.ocd ^
55
-f interface/stlink.cfg ^
6-
-c "transport select jtag" ^
76
-f scripts/gd32vf103/gd32vf103.ocd ^
87
-f scripts/gd32vf103/flash-app.ocd

‎scripts/gd32vf103/flash-app.ocd‎

Lines changed: 3 additions & 13 deletions
Original file line numberDiff line numberDiff line change
@@ -1,28 +1,18 @@
11
# This is an OpenOCD script that flashes the Application ROM.
22
# Used by tasks.json for "Load Application" command.
33
# Equivalent to "newt load -v gd32vf103c-start_my_sensor".
4+
# "flash gd32vf103" requires the RISC-V version of OpenOCD: https://github.com/riscv-mcu/riscv-openocd
45
# Based on https://github.com/Tencent/TencentOS-tiny/blob/master/doc/RISC-V%20eclipse%20%E5%BC%80%E5%8F%91%E7%8E%AF%E5%A2%83%E6%90%AD%E5%BB%BA.md
56

6-
# Connect to the device.
7-
init
8-
9-
echo "Stopping..."
10-
reset halt
11-
echo ""
12-
13-
flash banks
14-
flash list
15-
167
# Application address must sync with hw/bsp/gd32vf103c-start/bsp.yml
178
echo "Flashing Application..."
18-
#flash bank $_FLASHNAME bin/targets/gd32vf103c-start_my_sensor/app/apps/my_sensor_app/my_sensor_app.img 0x08001000 0 0 0 $_TARGETNAME
9+
flash bank bin/targets/gd32vf103c-start_my_sensor/app/apps/my_sensor_app/my_sensor_app.img gd32vf103 0x08001000 0 0 0 $_TARGETNAME
1910
echo ""
2011

2112
# Restart the device.
2213
echo "Restarting..."
2314
riscv set_reset_timeout_sec 1
24-
#init
25-
#halt
15+
init
2616
reset halt
2717
echo ""
2818

‎scripts/gd32vf103/flash-app.sh‎

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -4,9 +4,9 @@
44
set -e # Exit when any command fails.
55
set -x # Echo all commands.
66

7-
openocd/bin/openocd \
7+
riscv-openocd/src/openocd \
8+
-s riscv-openocd/tcl \
89
-f scripts/gd32vf103/flash-init.ocd \
910
-f interface/cmsis-dap.cfg \
10-
-c "transport select jtag" \
1111
-f scripts/gd32vf103/gd32vf103.ocd \
1212
-f scripts/gd32vf103/flash-app.ocd

‎scripts/gd32vf103/flash-boot.cmd‎

Lines changed: 0 additions & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -3,6 +3,5 @@
33
openocd\bin\openocd.exe ^
44
-f scripts/gd32vf103/flash-init.ocd ^
55
-f interface/stlink.cfg ^
6-
-c "transport select jtag" ^
76
-f scripts/gd32vf103/gd32vf103.ocd ^
87
-f scripts/gd32vf103/flash-boot.ocd

‎scripts/gd32vf103/flash-boot.ocd‎

Lines changed: 3 additions & 13 deletions
Original file line numberDiff line numberDiff line change
@@ -1,28 +1,18 @@
11
# This is an OpenOCD script that flashes the Bootloader ROM.
22
# Used by tasks.json for "Load Bootloader" command.
33
# Equivalent to "newt load -v gd32vf103c-start_my_sensor".
4+
# "flash gd32vf103" requires the RISC-V version of OpenOCD: https://github.com/riscv-mcu/riscv-openocd
45
# Based on https://github.com/Tencent/TencentOS-tiny/blob/master/doc/RISC-V%20eclipse%20%E5%BC%80%E5%8F%91%E7%8E%AF%E5%A2%83%E6%90%AD%E5%BB%BA.md
56

6-
# Connect to the device.
7-
init
8-
9-
echo "Stopping..."
10-
reset halt
11-
echo ""
12-
13-
flash banks
14-
flash list
15-
167
# Bootloader address must sync with hw/bsp/gd32vf103c-start/bsp.yml
178
echo "Flashing Bootloader..."
18-
#flash bank $_FLASHNAME bin/targets/gd32vf103c-start_boot/app/apps/boot_stub/boot_stub.elf.bin 0x08000000 0 0 0 $_TARGETNAME
9+
flash bank bin/targets/gd32vf103c-start_boot/app/apps/boot_stub/boot_stub.elf.bin gd32vf103 0x08000000 0 0 0 $_TARGETNAME
1910
echo ""
2011

2112
# Restart the device.
2213
echo "Restarting..."
2314
riscv set_reset_timeout_sec 1
24-
#init
25-
#halt
15+
init
2616
reset halt
2717
echo ""
2818

0 commit comments

Comments
 (0)