Replies: 2 comments
-
|
there is not much that I could do - of course HA must be able to connect to the charger - if there are IP/network errors, then I would assume, that the ChragerApp have similar problems. [The only additional checks I can suggests are to check/adjust/modify the WiFi connection from the Wallbox... like moving the WLAN router closer - or something similar] |
Beta Was this translation helpful? Give feedback.
-
|
Yea it is no fault of your own, just a personal obstacle to using your well made integration. I am going to continue to look for solutions and will report back if I find anything that can fix it. |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
Uh oh!
There was an error while loading. Please reload this page.
-
Having a strange issue where my HA will lose connection to the charger perhaps once a day, or every few days. When I try to reconfigure the API, it says unable to connect to the HOST/IP. I have done ping tests from my HA and it can always find the charger but won't connect. I have both my HA and charger set to static IP's so nothing changes.
I restart the HA and still have issues, but sometimes restarting the charger will resolve the issue. Any thoughts on why this might be occurring?
I read through this issue which seems to be the same as mine: #71
But unless there is an automated way to restart my charger every single day, I am unsure I can rely on the integration to work correctly for me. Hoping there is some other solution that might fix my problems that I could not find on my own.
Go-E Charger Firmware is 60.0
Go-E API is 2025.11.3
Beta Was this translation helpful? Give feedback.
All reactions