Fix astyle issues

Author: AGlass0fMilk

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/TARGET_EP_ATLAS/atlas_init.c

@@ -26,19 +26,19 @@
  * Override the subtarget sdk init startup hook (specific to nRF2)
  * This will configure the internal regulator to operate at 3.3V
  */
-void subtarget_sdk_init(void) {
-
-    if (NRF_UICR->REGOUT0 != UICR_REGOUT0_VOUT_3V3)
-    {
-         NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
-         while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
-         NRF_UICR->REGOUT0 = UICR_REGOUT0_VOUT_3V3;
-         NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
-         while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
-
-         // Trigger a soft reset so that the settings take effect
-         NVIC_SystemReset();
-     }
+void subtarget_sdk_init(void)
+{
+
+    if (NRF_UICR->REGOUT0 != UICR_REGOUT0_VOUT_3V3) {
+        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
+        while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
+        NRF_UICR->REGOUT0 = UICR_REGOUT0_VOUT_3V3;
+        NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
+        while (NRF_NVMC->READY == NVMC_READY_READY_Busy) {}
+
+        // Trigger a soft reset so that the settings take effect
+        NVIC_SystemReset();
+    }
 }
 
 

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/TARGET_MCU_NRF52840/TARGET_EP_ATLAS/usb_stdio.cpp

@@ -26,7 +26,8 @@
 #if MBED_CONF_EP_ATLAS_ENABLE_USB_STDIO_CONSOLE
 
 /* Retarget stdio to USBSerial */
-mbed::FileHandle *mbed::mbed_target_override_console(int fd) {
+mbed::FileHandle *mbed::mbed_target_override_console(int fd)
+{
     static USBSerial usb_serial;
     return &usb_serial;
 }

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/reloc_vector_table.c

@@ -1,28 +1,28 @@
-/* 
+/*
  * Copyright (c) 2016 Nordic Semiconductor ASA
  * All rights reserved.
- * 
+ *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
- * 
- *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list
  *      of conditions and the following disclaimer.
  *
- *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
- *      integrated circuit in a product or a software update for such product, must reproduce 
- *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA
+ *      integrated circuit in a product or a software update for such product, must reproduce
+ *      the above copyright notice, this list of conditions and the following disclaimer in
  *      the documentation and/or other materials provided with the distribution.
  *
- *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
- *      used to endorse or promote products derived from this software without specific prior 
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be
+ *      used to endorse or promote products derived from this software without specific prior
  *      written permission.
  *
- *   4. This software, with or without modification, must only be used with a 
+ *   4. This software, with or without modification, must only be used with a
  *      Nordic Semiconductor ASA integrated circuit.
  *
- *   5. Any software provided in binary or object form under this license must not be reverse 
- *      engineered, decompiled, modified and/or disassembled. 
- * 
+ *   5. Any software provided in binary or object form under this license must not be reverse
+ *      engineered, decompiled, modified and/or disassembled.
+ *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
@@ -33,9 +33,9 @@
  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
+ *
  */
- 
+
 #include "nrf.h"
 #include "cmsis_nvic.h"
 #include "stdint.h"
@@ -48,13 +48,13 @@
 #endif
 
 #if defined(__ARMCC_VERSION)
-    __attribute__ ((section(".bss.nvictable")))
-    uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
+__attribute__((section(".bss.nvictable")))
+uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
 #elif defined(__GNUC__)
-    __attribute__ ((section(".nvictable")))
-    uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
+__attribute__((section(".nvictable")))
+uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS];
 #elif defined(__ICCARM__)
-    uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS] @ ".nvictable";
+uint32_t nrf_dispatch_vector[NVIC_NUM_VECTORS] @ ".nvictable";
 #endif
 
 #include "platform/mbed_toolchain.h"
@@ -73,21 +73,21 @@ extern uint32_t __Vectors[];
 void nrf_reloc_vector_table(void)
 {
     // Copy and switch to dynamic vectors
-	uint32_t *old_vectors = VECTORS_FLASH_START;
-	uint32_t i;
-	for (i = 0; i< NVIC_NUM_VECTORS; i++) {
-		nrf_dispatch_vector[i] = old_vectors[i];
-	}
+    uint32_t *old_vectors = VECTORS_FLASH_START;
+    uint32_t i;
+    for (i = 0; i < NVIC_NUM_VECTORS; i++) {
+        nrf_dispatch_vector[i] = old_vectors[i];
+    }
 
 #if defined(SOFTDEVICE_PRESENT)
 
     /**
      * Before setting the new vector table address in the SoftDevice the MBR must be initialized.
      * If no bootloader is present the MBR will be initialized automatically.
      * If a bootloader is present nrf_dfu_mbr_init_sd must be called once and only once.
-     * 
+     *
      * By resetting the MBR and SoftDevice VTOR address first, it becomes safe to initialize
-     * the MBR again regardless of how the application was started. 
+     * the MBR again regardless of how the application was started.
      */
 
     /* Reset MBR VTOR to original state before calling MBR init. */
@@ -101,7 +101,7 @@ void nrf_reloc_vector_table(void)
     /* Set SCB->VTOR to go through MBR to trap SoftDevice service calls. */
     SCB->VTOR = 0x0;
 
-    /* Initialize MBR so SoftDevice service calls are being trapped correctly. 
+    /* Initialize MBR so SoftDevice service calls are being trapped correctly.
      * This call sets MBR_VTOR_ADDRESS to point to the SoftDevice's VTOR at address 0x1000.
      */
     nrf_dfu_mbr_init_sd();
@@ -112,18 +112,18 @@ void nrf_reloc_vector_table(void)
 #else
 
     /* No SoftDevice is present. Set all interrupts to vector table in RAM. */
-    SCB->VTOR = (uint32_t) nrf_dispatch_vector;    
+    SCB->VTOR = (uint32_t) nrf_dispatch_vector;
 #endif
 }
 
 void mbed_sdk_init(void)
 {
-	if (STDIO_UART_RTS != NC) {
-		gpio_t rts;
-		gpio_init_out(&rts, STDIO_UART_RTS);
-		/* Set STDIO_UART_RTS as gpio driven low */
-		gpio_write(&rts, 0);
-	}
-
-        subtarget_sdk_init();
+    if (STDIO_UART_RTS != NC) {
+        gpio_t rts;
+        gpio_init_out(&rts, STDIO_UART_RTS);
+        /* Set STDIO_UART_RTS as gpio driven low */
+        gpio_write(&rts, 0);
+    }
+
+    subtarget_sdk_init();
 }

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/subtarget_init.c

@@ -19,6 +19,7 @@
 #include "subtarget_init.h"
 #include "platform/mbed_toolchain.h"
 
-MBED_WEAK void subtarget_sdk_init(void) {
+MBED_WEAK void subtarget_sdk_init(void)
+{
     /* Do nothing by default */
 }

targets/TARGET_NORDIC/TARGET_NRF5x/TARGET_NRF52/subtarget_init.h

@@ -27,7 +27,7 @@ extern "C" {
  * Since Mbed's `mbed_sdk_init` hook is used by the NRF52 family code, this
  * initialization hook is provided so subtargets may implement their own startup
  * initialization code, if necessary.
- * 
+ *
  * By default, it is a blank function that is declared a "weak" symbol
  */
 void subtarget_sdk_init(void);