usb: add connection type debug message to examples.

mattthebaker · mattthebaker · commit ffba7bc9fa58 · 2022-04-04T16:57:32.000-07:00
diff --git a/examples/acc_threshold_detector.py b/examples/acc_threshold_detector.py
@@ -8,7 +8,7 @@
 print("Searching for device...")
 d = MetaWear(sys.argv[1])
 d.connect()
-print("Connected to " + d.address)
+print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
 print("Configuring device")
 libmetawear.mbl_mw_settings_set_connection_parameters(d.board, 7.5, 7.5, 0, 6000)
 sleep(1.0)
diff --git a/examples/anonymous_datasignals.py b/examples/anonymous_datasignals.py
@@ -14,7 +14,7 @@
 # connect
 metawear = MetaWear(sys.argv[1])
 metawear.connect()
-print("Connected")
+print("Connected to " + metawear.address + " over " + ("USB" if metawear.usb.is_connected else "BLE"))
 
 # setup
 e = Event()
diff --git a/examples/calibrate.py b/examples/calibrate.py
@@ -10,7 +10,7 @@
 # connect
 device = MetaWear(sys.argv[1])
 device.connect()
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # event
 e = Event()
diff --git a/examples/data_fuser.py b/examples/data_fuser.py
@@ -65,7 +65,7 @@ def start(self):
 for i in range(len(argv) - 1):
     d = MetaWear(argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/data_processor.py b/examples/data_processor.py
@@ -47,7 +47,7 @@ def start(self):
 for i in range(len(argv) - 1):
     d = MetaWear(argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/firmware_build.py b/examples/firmware_build.py
@@ -10,7 +10,7 @@
 # connect
 m = MetaWear(sys.argv[1])
 m.connect()
-print("Connected")
+print("Connected to " + m.address + " over " + ("USB" if m.usb.is_connected else "BLE"))
 
 # get board info
 size = c_uint(0)
diff --git a/examples/full_reset.py b/examples/full_reset.py
@@ -9,7 +9,7 @@
 # connect
 device = MetaWear(sys.argv[1])
 device.connect()
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # stop logging
 libmetawear.mbl_mw_logging_stop(device.board)
diff --git a/examples/led.py b/examples/led.py
@@ -10,7 +10,7 @@
 # connect
 device = MetaWear(sys.argv[1])
 device.connect()
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # create led pattern
 pattern= LedPattern(repeat_count= Const.LED_REPEAT_INDEFINITELY)
diff --git a/examples/led_dongle.py b/examples/led_dongle.py
@@ -11,7 +11,7 @@
 # Add hci_mac to the setup to specify which dongle to use
 device = MetaWear(sys.argv[1], hci_mac="B8:27:EB:F2:61:2E")
 device.connect()
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # create led pattern
 pattern= LedPattern(repeat_count= Const.LED_REPEAT_INDEFINITELY)
diff --git a/examples/led_temp.py b/examples/led_temp.py
@@ -10,7 +10,7 @@
 # connect
 device = MetaWear(sys.argv[1])
 device.connect()
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # create led pattern
 pattern= LedPattern(repeat_count= Const.LED_REPEAT_INDEFINITELY)
diff --git a/examples/log_acc.py b/examples/log_acc.py
@@ -10,7 +10,7 @@
 print("Searching for device...")
 d = MetaWear(sys.argv[1])
 d.connect()
-print("Connected to " + d.address)
+print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
 
 print("Configuring device")
 
diff --git a/examples/log_acc_perf.py b/examples/log_acc_perf.py
@@ -10,7 +10,7 @@
 print("Searching for device...")
 d = MetaWear(sys.argv[1])
 d.connect()
-print("Connected to " + d.address)
+print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
 
 print("Configuring device")
 
diff --git a/examples/log_download.py b/examples/log_download.py
@@ -14,7 +14,7 @@
 # connect
 metawear = MetaWear(sys.argv[1])
 metawear.connect()
-print("Connected")
+print("Connected to " + metawear.address + " over " + ("USB" if metawear.usb.is_connected else "BLE"))
 
 # setup
 e = Event()
diff --git a/examples/log_temp.py b/examples/log_temp.py
@@ -11,7 +11,7 @@
 print("Searching for device...")
 d = MetaWear(sys.argv[1])
 d.connect()
-print("Connected to " + d.address)
+print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
 
 try:
     # setup events
diff --git a/examples/macro_remove.py b/examples/macro_remove.py
@@ -13,7 +13,7 @@
 # connect
 device = MetaWear(sys.argv[1])
 device.connect()
-print("Connected to " + device.address)
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 sleep(1.0)
 
 # remove macros    
diff --git a/examples/macro_setup.py b/examples/macro_setup.py
@@ -13,7 +13,7 @@
 
 # connect
 device.connect()
-print("Connected to " + device.address)
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 
 # setup events
 e = Event()
diff --git a/examples/motion_record_log.py b/examples/motion_record_log.py
@@ -40,7 +40,7 @@ def wont_be_used():
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/motion_record_log_no_reset.py b/examples/motion_record_log_no_reset.py
@@ -41,7 +41,7 @@ def wont_be_used():
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 for s in states:
diff --git a/examples/motion_record_stream.py b/examples/motion_record_stream.py
@@ -42,7 +42,7 @@ def passthrough_created(self, context, signal):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/scan_connect.py b/examples/scan_connect.py
@@ -37,7 +37,7 @@ def handler(result):
 device = MetaWear(address)
 device.connect()
 
-print("Connected")
+print("Connected to " + device.address + " over " + ("USB" if device.usb.is_connected else "BLE"))
 print("Device information: " + str(device.info))
 sleep(5.0)
 
diff --git a/examples/stream_acc.py b/examples/stream_acc.py
@@ -27,7 +27,7 @@ def data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_acc_gyro_bmi160.py b/examples/stream_acc_gyro_bmi160.py
@@ -35,7 +35,7 @@ def gyro_data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure all metawears
diff --git a/examples/stream_acc_gyro_bmi270.py b/examples/stream_acc_gyro_bmi270.py
@@ -35,7 +35,7 @@ def gyro_data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_acc_packed.py b/examples/stream_acc_packed.py
@@ -30,7 +30,7 @@ def acc_data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_acc_x.py b/examples/stream_acc_x.py
@@ -28,7 +28,7 @@ def data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_gyro_packed.py b/examples/stream_gyro_packed.py
@@ -31,7 +31,7 @@ def gyro_data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_quat.py b/examples/stream_quat.py
@@ -27,7 +27,7 @@ def data_handler(self, ctx, data):
 for i in range(len(sys.argv) - 1):
     d = MetaWear(sys.argv[i + 1])
     d.connect()
-    print("Connected to " + d.address)
+    print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
     states.append(State(d))
 
 # configure
diff --git a/examples/stream_temp.py b/examples/stream_temp.py
@@ -13,7 +13,7 @@
 
 # connect to macc
 d.connect()
-print("Connected to " + d.address)
+print("Connected to " + d.address + " over " + ("USB" if d.usb.is_connected else "BLE"))
 e = Event()
 
 # create callback
