Add support for ThermoPro-TP211B temperature sensor

Author: arahimi

README.md

@@ -377,6 +377,7 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
     [289]  Voltcraft EnergyCount 3000 (ec3k)
     [290]  Orion Endpoint from Badger Meter, GIF2020OCECNA, water meter, hopping from 904.4 Mhz to 924.6Mhz (-s 1600k)
     [291]  Geevon TX19-1 outdoor sensor
+    [292]  ThermoPro TP211B Thermometer
 
 * Disabled by default, use -R n or a conf file to enable
 
@@ -386,7 +387,7 @@ See [CONTRIBUTING.md](./docs/CONTRIBUTING.md).
   [-d <RTL-SDR USB device index>] (default: 0)
   [-d :<RTL-SDR USB device serial (can be set with rtl_eeprom -s)>]
 	To set gain for RTL-SDR use -g <gain> to set an overall gain in dB.
-	SoapySDR device driver is available.
+	SoapySDR device driver is not available.
   [-d ""] Open default SoapySDR device
   [-d driver=rtlsdr] Open e.g. specific SoapySDR device
 	To set gain for SoapySDR use -g ELEM=val,ELEM=val,... e.g. -g LNA=20,TIA=8,PGA=2 (for LimeSDR).

conf/rtl_433.example.conf

@@ -530,6 +530,7 @@ convert si
   protocol 289 # Voltcraft EnergyCount 3000 (ec3k)
   protocol 290 # Orion Endpoint from Badger Meter, GIF2020OCECNA, water meter, hopping from 904.4 Mhz to 924.6Mhz (-s 1600k)
   protocol 291 # Geevon TX19-1 outdoor sensor
+  protocol 292 # ThermoPro TP211B Thermometer
 
 ## Flex devices (command line option "-X")
 

man/man1/rtl_433.1

@@ -168,7 +168,7 @@ RTL\-SDR device driver is available.
 To set gain for RTL\-SDR use \-g <gain> to set an overall gain in dB.
 .RE
 .RS
-SoapySDR device driver is available.
+SoapySDR device driver is not available.
 .RE
 .TP
 [ \fB\-d\fI ""\fP ]