enable all sensors on RAK4631

Author: recrof

variants/rak4631/platformio.ini

@@ -9,7 +9,7 @@ build_flags = ${nrf52_base.build_flags}
   -D RAK_BOARD
   -D PIN_BOARD_SCL=14
   -D PIN_BOARD_SDA=13
-  -D PIN_GPS_TX=16 
+  -D PIN_GPS_TX=16
   -D PIN_GPS_RX=15
   -D PIN_GPS_EN=-1
   -D PIN_OLED_RESET=-1
@@ -19,19 +19,27 @@ build_flags = ${nrf52_base.build_flags}
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
   -D ENV_INCLUDE_GPS=1
+  -D ENV_INCLUDE_AHTX0=1
+  -D ENV_INCLUDE_BME280=1
+  -D ENV_INCLUDE_BMP280=1
   -D ENV_INCLUDE_SHTC3=1
   -D ENV_INCLUDE_LPS22HB=1
+  -D ENV_INCLUDE_INA3221=1
   -D ENV_INCLUDE_INA219=1
 build_src_filter = ${nrf52_base.build_src_filter}
   +<../variants/rak4631>
-  +<helpers/sensors> 
+  +<helpers/sensors>
 lib_deps =
   ${nrf52_base.lib_deps}
   adafruit/Adafruit SSD1306 @ ^2.5.13
   stevemarple/MicroNMEA @ ^2.0.6
-  adafruit/Adafruit SHTC3 Library@^1.0.1
   arduino-libraries/Arduino_LPS22HB@^1.0.2
-  adafruit/Adafruit INA219@^1.2.3
+  adafruit/Adafruit INA3221 Library @ ^1.0.1
+  adafruit/Adafruit INA219 @ ^1.2.3
+  adafruit/Adafruit AHTX0 @ ^2.0.5
+  adafruit/Adafruit BME280 Library @ ^2.3.0
+  adafruit/Adafruit BMP280 Library @ ^2.6.8
+  adafruit/Adafruit SHTC3 Library @ ^1.0.1
   sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
 
 [env:RAK_4631_Repeater]