Repeater & Room Server CLI Reference

You can configure both Repeater and Room Server devices either via Serial (and terminal app/putty/Serial Monitor), or via the T-Deck CLI screen.

Serial-only commands:

set freq {frequency}

example: set freq 915.8

time {epoch-secs}

example: time 1738242833

Commands via Serial or T-Deck UI

advert

Sends an advertisement packet

reboot

Reboots the device. (note, you'll prob get 'Timeout' which is normal)

clock

Displays current time per device's clock.

password {new-password}

Sets a new admin password for the device.

set af {air-time-factor}

Sets the air-time-factor.

set tx {tx-power-dbm}

Sets LoRa transmit power in dBm. (reboot to apply)

set name {name}

Sets the advertisement name.

set lat {latitude}

Sets the advertisement map latitude. (decimal degrees)

set lon {longitude}

Sets the advertisement map longitude. (decimal degrees)

ver

Shows the device version and firmware build date.

Commands only via T-Deck

clock sync

Syncs device's clock with T-Deck's clock