[Bug]: Critical fault #11

[uguraltinsoy]

Category

Other

Hardware

DIY

Firmware Version

2.4.2.5b45303

Description

I made the connections as shown below and completed the setup, but I am encountering an error during installation. Despite the error, the device powers on, but I get a "Critical fault #11" error, and I cannot complete the setup. I tried two different ESP32s and two different Ra-02 modules, so it's unlikely to be a hardware-related issue.

https://adrelien.com/blog/meshtastic-diy-how-to-build-your-own-meshtatic-node-esp32-lora-radio/amp/

Relevant log output

No response

[Lolagatorade]

Had the error too but my device was functional after a reboot and it was only a one time error.

The error came up randomly during operation roughly 17-20hr after the update

[Lolagatorade]

[uguraltinsoy]

I made the connection according to the table here and the problem disappeared

MISO -> IO19
MOSI -> IO27
SCK -> IO5
NSS -> IO18
RST -> IO23
DIO0 -> IO26
DIO1 -> IO33
DIO2 -> IO32