MPAE-19447 created working project, readme and main-meta updated

Author: Glen-Nilsen

.main-meta/main.json

@@ -4,8 +4,8 @@
     "content": {
         "metaDataVersion": "1.3.0",
         "name": "com.microchip.mcu8.mplabx.project.avr128db48-i2c-proximity-sensor-polled-dvrt",
-        "version": " ",
-        "displayName": "",
+        "version": "1.0.0",
+        "displayName": "avr128db48-i2c-proximity-sensor-polled-dvrt",
         "projectName": "avr128db48-i2c-proximity-sensor-polled-dvrt",
         "shortDescription": "Reads proximity sensor value. With DV Run Time output, sends values to MPLAB Data Visualizer via DVRT protocol every 100 ms. Polled using Delay driver for sampling frequency.",
         "ide": {
@@ -19,12 +19,8 @@
             }
         ],
         "dfp": {
-            "name": "",
-            "semverRange": ""
-        },
-        "configurator": {
-            "name": "",
-            "semverRange": ""
+            "name": "AVR-Dx_DFP",   
+            "semverRange": "^2.7.321"
         },
         "device": {
             "metaDataVersion": "1.0.0",
@@ -37,8 +33,23 @@
             }
         },
         "author": "Glen Nilsen",
-        "peripherals": [],
-        "keywords": [],
+        "peripherals": [
+            "I2C",
+            "GPIO",
+            "UART"
+        ],
+        "keywords": [
+            "Data Visualizer",
+            "MPLAB Data Visualizer",
+            "I2C",
+            "UART",
+            "Getting Started",
+            "Melody",
+            "MCC Melody",
+            "Curiosity Nano Explorer",
+            "Example Components",
+            "MCC Melody Example Components"
+        ],
         "additionalData": {
             "longDescription": {
                 "metaDataVersion": "1.0.0",

README.md

@@ -1,4 +1,4 @@
-<!-- Please do not change this logo with link -->
+<!-- MPAE-19447 Please do not change this logo with link -->
 
 <a target="_blank" href="https://www.microchip.com/" id="top-of-page">
    <picture>
@@ -10,42 +10,58 @@
 
 # Update the title for avr128db48-i2c-proximity-sensor-polled-dvrt here
 
-<!-- This is where the introduction to the example goes, including mentioning the peripherals used -->
+The [I<sup>2</sup>C Proximity Sensor example](https://onlinedocs.microchip.com/v2/keyword-lookup?keyword=I2C.HOST.EX.RUNNING.I2C.HOST.PROXIMITY.SENSOR&version=latest&redirect=true "I2C Proximity Sensor example"
+), of the [MCC Melody I<sup>2</sup>C Example Component (for the Curiosity Nano Explorer)](https://onlinedocs.microchip.com/v2/keyword-lookup?keyword=I2C.HOST.EXAMPLE.COMPONENT&version=latest&redirect=true "MCC Melody I<sup>2</sup>C Example Component for the Curiosity Nano Explorer"
+), is used here in the Polled implementation, with the DV Run Time visualization. 
 
-## Related Documentation
+![alt text](images/avr128db48-i2c-proximity-sensor-polled-dvrt_intro.png)
 
-<!-- Any information about an application note or tech brief can be linked here. Use unbreakable links!
-     In addition a link to the device family landing page and relevant peripheral pages as well:
-     - [AN3381 - Brushless DC Fan Speed Control Using Temperature Input and Tachometer Feedback](https://microchip.com/00003381/)
-     - [PIC18F-Q10 Family Product Page](https://www.microchip.com/design-centers/8-bit/pic-mcus/device-selection/pic18f-q10-product-family) -->
+This example demonstrates how to read the value of the VCNL4200 proximity sensor on the Curiosity Nano Explorer, with the DV Run Time Visualization Output selected. Every 100 ms, an LED and a Debug I/O pin are toggled. Depending on the DVRT streaming tick setting (default is 100 ms), the appropriately formatted values of the variables added to the DVRT Streaming Table are sent to the [MPLAB® Data Visualizer](https://www.microchip.com/en-us/tools-resources/debug/mplab-data-visualizer "MPLAB® Data Visualizer").  
 
-## Software Used
+## Operation
+The below image of the MPLAB Data Visualizer shows the application running, where proximityValue and framecount have been added to the DVRT Streaming Table and Time Plot: 
 
-<!-- All software used in this example must be listed here. Use unbreakable links!
-     - MPLAB® X IDE 5.30 or newer [(microchip.com/mplab/mplab-x-ide)](http://www.microchip.com/mplab/mplab-x-ide)
-     - MPLAB® XC8 2.10 or a newer compiler [(microchip.com/mplab/compilers)](http://www.microchip.com/mplab/compilers)
-     - MPLAB® Code Configurator (MCC) 3.95.0 or newer [(microchip.com/mplab/mplab-code-configurator)](https://www.microchip.com/mplab/mplab-code-configurator)
-     - MPLAB® Code Configurator (MCC) Device Libraries PIC10 / PIC12 / PIC16 / PIC18 MCUs [(microchip.com/mplab/mplab-code-configurator)](https://www.microchip.com/mplab/mplab-code-configurator)
-     - Microchip PIC18F-Q Series Device Support (1.4.109) or newer [(packs.download.microchip.com/)](https://packs.download.microchip.com/) -->
+![alt text](images/avr128db48-i2c-proximity-sensor-polled-dvrt.png)
 
-- MPLAB® X IDE 6.25.0 or newer [(MPLAB® X IDE 6.25)](https://www.microchip.com/en-us/development-tools-tools-and-software/mplab-x-ide)
-- MPLAB® XC8 3.0.0 or newer compiler [(MPLAB® XC8 3.0)](https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers/xc8)
 
-## Hardware Used
+## Setup
 
-<!-- All hardware used in this example must be listed here. Use unbreakable links!
-     - PIC18F47Q10 Curiosity Nano [(DM182029)](https://www.microchip.com/Developmenttools/ProductDetails/DM182029)
-     - Curiosity Nano Base for Click boards™ [(AC164162)](https://www.microchip.com/Developmenttools/ProductDetails/AC164162)
-     - POT Click board™ [(MIKROE-3402)](https://www.mikroe.com/pot-click) -->
+The following outlines the complete MPLAB Code Configuration (MCC) Melody configuration, including all the selected tasks implemented in this example.
 
-## Setup
+![alt text](images\avr128db48-i2c-proximity-sensor-polled-dvrt_configuration.png)
 
-<!-- Explain how to connect hardware and set up software. Depending on complexity, step-by-step instructions and/or tables and/or images can be used -->
+![alt text](images\avr128db48-i2c-proximity-sensor-polled-dvrt_configuration_pins.png)
 
-## Operation
 
-<!-- Explain how to operate the example. Depending on complexity, step-by-step instructions and/or tables and/or images can be used -->
+## MCC Melody Example Components
+Example Components integrate learning material directly into the MCC. This allows the users to conveniently place the configuration instructions side-by-side to the components they are configuring. For more information, refer to the [MCC Melody Example Components](https://onlinedocs.microchip.com/v2/keyword-lookup?keyword=MCC.MELODY.EXAMPLES&version=latest&redirect=true) introduction. 
+
+
+## Related Documentation
 
-## Summary
+- [MCC Melody I<sup>2</sup>C Example Component (for the Curiosity Nano Explorer)](https://onlinedocs.microchip.com/v2/keyword-lookup?keyword=I2C.HOST.EXAMPLE.COMPONENT&version=latest&redirect=true "MCC Melody I<sup>2</sup>C Example Component for the Curiosity Nano Explorer")
+- [MCC Melody Design Patterns for Control Flow](https://onlinedocs.microchip.com/g/GUID-7CE1AEE9-2487-4E7B-B26B-93A577BA154E "MCC Melody Design Patterns for Control Flow")
+
+- [Curiosity Nano Explorer User Guide](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/UserGuides/CNANO-Explorer-UserGuide-DS50003716.pdf "Curiosity Nano Explorer Users Guide")
+
+- [AVR128DB48 Data Sheet](https://ww1.microchip.com/downloads/en/DeviceDoc/AVR128DB28-32-48-64-DataSheet-DS40002247A.pdf "AVR128DB48 Data Sheet")
+
+## Software Used
+- [MPLAB® X IDE](https://www.microchip.com/en-us/development-tools-tools-and-software/mplab-x-ide) v6.25 or newer 
+- [MPLAB® XC8](https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers/xc8) v3.00 or newer
+
+- [MPLAB® Code Configurator](https://www.microchip.com/en-us/tools-resources/configure/mplab-code-configurator) (MCC) Plug-in Version v5.6.2 or newer (*Tools>Plugins>Installed*, search: "MCC")
+- [MPLAB® Data Visualizer](https://www.microchip.com/en-us/tools-resources/debug/mplab-data-visualizer) Plug-in Version v1.4.1926 or newer (*Tools>Plugins>Installed*, search: "Data Visualizer")
+- MCC Melody I2C_Host Example Component for the Curiosity Nano Explorer 1.0.0 or newer
+- MCC Core v5.8.2 or newer 
+- Single Page Application (SPA) Host v1.0.0 or newer
+- MCC Melody Core v2.9.1 or newer
+
+Open the MCC Content Manager ![CM_icon](images/Icon-MPLAB-CM24.png) to verify the MCC Core and MCC Melody Core versions. 
+
+![alt text](images/MCC_Core_ContentLibrary_Versions_SPA.png) 
+
+## Hardware Used
+- AVR128DB48 Curiosity Nano [(EV35L43A)](https://www.microchip.com/en-us/development-tool/EV35L43A)
+- Curiosity Nano Explorer [(EV58G97A)](https://www.microchip.com/en-us/development-tool/EV58G97A)
 
-<!-- Summarize what the example has shown -->

avr128db48-i2c-proximity-sensor-polled-dvrt.X/Makefile

@@ -0,0 +1,113 @@
+#
+#  There exist several targets which are by default empty and which can be 
+#  used for execution of your targets. These targets are usually executed 
+#  before and after some main targets. They are: 
+#
+#     .build-pre:              called before 'build' target
+#     .build-post:             called after 'build' target
+#     .clean-pre:              called before 'clean' target
+#     .clean-post:             called after 'clean' target
+#     .clobber-pre:            called before 'clobber' target
+#     .clobber-post:           called after 'clobber' target
+#     .all-pre:                called before 'all' target
+#     .all-post:               called after 'all' target
+#     .help-pre:               called before 'help' target
+#     .help-post:              called after 'help' target
+#
+#  Targets beginning with '.' are not intended to be called on their own.
+#
+#  Main targets can be executed directly, and they are:
+#  
+#     build                    build a specific configuration
+#     clean                    remove built files from a configuration
+#     clobber                  remove all built files
+#     all                      build all configurations
+#     help                     print help mesage
+#  
+#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+#  .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+#  Available make variables:
+#
+#     CND_BASEDIR                base directory for relative paths
+#     CND_DISTDIR                default top distribution directory (build artifacts)
+#     CND_BUILDDIR               default top build directory (object files, ...)
+#     CONF                       name of current configuration
+#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
+#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
+#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
+#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
+#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
+#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment 
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+RANLIB=ranlib
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+# WARNING: the IDE does not call this target since it takes a long time to
+# simply run make. Instead, the IDE removes the configuration directories
+# under build and dist directly without calling make.
+# This target is left here so people can do a clean when running a clean
+# outside the IDE.
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk