Import STM32CubeG4 v1.3.0 on 29-Jul-2020.

From https://github.com/STMicroelectronics/STM32CubeG4.git tag v1.3.0

Signed-off-by: Damien George <[email protected]>

Author: dpgeorge

CMSIS/STM32G4xx/Include/stm32g431xx.h

@@ -0,0 +1,206 @@
+/**
+  ******************************************************************************
+  * @file    stm32g4xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32G4xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32G4xx device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e.
+  *                code will be based on direct access to peripheral's registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32g4xx
+  * @{
+  */
+
+#ifndef __STM32G4xx_H
+#define __STM32G4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32G4)
+#define STM32G4
+#endif /* STM32G4 */
+
+/* Uncomment the line below according to the target STM32G4 device used in your
+   application
+  */
+
+#if !defined (STM32G431xx) && !defined (STM32G441xx) && !defined (STM32G471xx) && \
+    !defined (STM32G473xx) && !defined (STM32G474xx) && !defined (STM32G484xx) && \
+    !defined (STM32GBK1CB) && !defined (STM32G491xx) && !defined (STM32G4A1xx)
+  /* #define STM32G431xx */   /*!< STM32G431xx Devices */
+  /* #define STM32G441xx */   /*!< STM32G441xx Devices */
+  /* #define STM32G471xx */   /*!< STM32G471xx Devices */
+  /* #define STM32G473xx */   /*!< STM32G473xx Devices */
+  /* #define STM32G483xx */   /*!< STM32G483xx Devices */
+  /* #define STM32G474xx */   /*!< STM32G474xx Devices */
+  /* #define STM32G484xx */   /*!< STM32G484xx Devices */
+  /* #define STM32G491xx */   /*!< STM32G491xx Devices */
+  /* #define STM32G4A1xx */   /*!< STM32G4A1xx Devices */
+  /* #define STM32GBK1CB */   /*!< STM32GBK1CB Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.2.0
+  */
+#define __STM32G4_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32G4_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
+#define __STM32G4_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32G4_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32G4_CMSIS_VERSION        ((__STM32G4_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32G4_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32G4_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32G4_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32G431xx)
+  #include "stm32g431xx.h"
+#elif defined(STM32G441xx)
+  #include "stm32g441xx.h"
+#elif defined(STM32G471xx)
+  #include "stm32g471xx.h"
+#elif defined(STM32G473xx)
+  #include "stm32g473xx.h"
+#elif defined(STM32G483xx)
+  #include "stm32g483xx.h"
+#elif defined(STM32G474xx)
+  #include "stm32g474xx.h"
+#elif defined(STM32G484xx)
+  #include "stm32g484xx.h"
+#elif defined(STM32G491xx)
+  #include "stm32g491xx.h"
+#elif defined(STM32G4A1xx)
+  #include "stm32g4a1xx.h"
+#elif defined(STM32GBK1CB)
+  #include "stm32gbk1cb.h"
+#else
+  #error "Please select first the target STM32G4xx device used in your application (in stm32g4xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32g4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32G4xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/