Using an ST7262 device

[sean-palmer-coding]

I noticed that the ST7262 driver was listed but is not available as a board in the library. How do I use this library with that IC?

[moononournation]

It is a RGB display, you may find more details at PDQgraphicstest example

[sean-palmer-coding]

So this right here?

    Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
    40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
    45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
    5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
    8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
    0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,
    0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
    1 /* pclk_active_neg */, 16000000 /* prefer_speed */);

[moononournation]

yes, and one more following line of code

[sean-palmer-coding]

What board did you use in your demo on YouTube of that chip working?

[moononournation]

It is ESP32-4827S043: https://www.aliexpress.com/item/1005004788147691.html

[sean-palmer-coding]

Thank you!