Arduino_ESP32RGBPanel::Arduino_ESP32RGBPanel(int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int)

[marteke]

hello, how are you?

/*******************************************************************************
*/
#include <Arduino_GFX_Library.h>
#define GFX_BL 2
Arduino_ESP32RGBPanel bus = new Arduino_ESP32RGBPanel(
GFX_NOT_DEFINED / CS /, GFX_NOT_DEFINED / SCK /, GFX_NOT_DEFINED / SDA /,
40 / DE /, 41 / VSYNC /, 39 / HSYNC /, 42 / PCLK /,
45 / R0 /, 48 / R1 /, 47 / R2 /, 21 / R3 /, 14 / R4 /,
5 / G0 /, 6 / G1 /, 7 / G2 /, 15 / G3 /, 16 / G4 /, 4 / G5 /,
8 / B0 /, 3 / B1 /, 46 / B2 /, 9 / B3 /, 1 / B4 /
);
// option 1:
// Uncomment for ILI6485 LCD 480x272
Arduino_RPi_DPI_RGBPanel gfx = new Arduino_RPi_DPI_RGBPanel(
bus,
480 / width /, 0 / hsync_polarity /, 8 / hsync_front_porch /, 4 / hsync_pulse_width /, 43 / hsync_back_porch /,
272 / height /, 0 / vsync_polarity /, 8 / vsync_front_porch /, 4 / vsync_pulse_width /, 12 / vsync_back_porch /,
1 / pclk_active_neg /, 9000000 / prefer_speed /, true / auto_flush /);
/

• End of Arduino_GFX setting
  ******************************************************************************/

/*******************************************************************************

• End of Arduino_GFX setting
  ******************************************************************************/

void setup(void)
{
gfx->begin();
gfx->fillScreen(BLACK);

#ifdef TFT_BL
pinMode(TFT_BL, OUTPUT);
digitalWrite(TFT_BL, HIGH);
#endif

gfx->setCursor(10, 10);
gfx->setTextColor(RED);
gfx->println("Hello World!");

delay(5000); // 5 seconds

}

void loop()
{
gfx->setCursor(random(gfx->width()), random(gfx->height()));
gfx->setTextColor(random(0xffff), random(0xffff));
gfx->setTextSize(random(6) /* x scale /, random(6) / y scale /, random(2) / pixel_margin */);
gfx->println("Hello World!");

delay(1000); // 1 second

}
do you have any idea about this error?

Compilation error: no matching function for call to 'Arduino_ESP32RGBPanel::Arduino_ESP32RGBPanel(int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int)'

thanks

[moononournation]

You may try latest PDQgraphicstest.ino first.

[marteke]

PDQgraphictest.ino, give me this error:

"Compilation error: exit status 1"

do I need to uncomment any line in programation?