dmaengine: Fix spelling mistakes

Correct spelling mistakes in the DMA engine to improve readability
and clarity without altering functionality.

Signed-off-by: Amit Vadhavana <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Reviewed-by: Fenghua Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

Author: AmitVadhavana14

drivers/dma/acpi-dma.c

@@ -112,7 +112,7 @@ static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
 }
 
 /**
- * acpi_dma_parse_csrt - parse CSRT to exctract additional DMA resources
+ * acpi_dma_parse_csrt - parse CSRT to extract additional DMA resources
  * @adev:	ACPI device to match with
  * @adma:	struct acpi_dma of the given DMA controller
  *
@@ -305,7 +305,7 @@ EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
  * found.
  *
  * Return:
- * 0, if no information is avaiable, -1 on mismatch, and 1 otherwise.
+ * 0, if no information is available, -1 on mismatch, and 1 otherwise.
  */
 static int acpi_dma_update_dma_spec(struct acpi_dma *adma,
 		struct acpi_dma_spec *dma_spec)

drivers/dma/altera-msgdma.c

@@ -153,7 +153,7 @@ struct msgdma_extended_desc {
 /**
  * struct msgdma_sw_desc - implements a sw descriptor
  * @async_tx: support for the async_tx api
- * @hw_desc: assosiated HW descriptor
+ * @hw_desc: associated HW descriptor
  * @node: node to move from the free list to the tx list
  * @tx_list: transmit list node
  */
@@ -511,7 +511,7 @@ static void msgdma_copy_one(struct msgdma_device *mdev,
 	 * of the DMA controller. The descriptor will get flushed to the
 	 * FIFO, once the last word (control word) is written. Since we
 	 * are not 100% sure that memcpy() writes all word in the "correct"
-	 * oder (address from low to high) on all architectures, we make
+	 * order (address from low to high) on all architectures, we make
 	 * sure this control word is written last by single coding it and
 	 * adding some write-barriers here.
 	 */

drivers/dma/amba-pl08x.c

@@ -2,7 +2,7 @@
 /*
  * Copyright (c) 2006 ARM Ltd.
  * Copyright (c) 2010 ST-Ericsson SA
- * Copyirght (c) 2017 Linaro Ltd.
+ * Copyright (c) 2017 Linaro Ltd.
  *
  * Author: Peter Pearse <[email protected]>
  * Author: Linus Walleij <[email protected]>

drivers/dma/at_hdmac.c

@@ -339,7 +339,7 @@ static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
  * @regs: memory mapped register base
  * @clk: dma controller clock
  * @save_imr: interrupt mask register that is saved on suspend/resume cycle
- * @all_chan_mask: all channels availlable in a mask
+ * @all_chan_mask: all channels available in a mask
  * @lli_pool: hw lli table
  * @memset_pool: hw memset pool
  * @chan: channels table to store at_dma_chan structures
@@ -668,7 +668,7 @@ static inline u32 atc_calc_bytes_left(u32 current_len, u32 ctrla)
  * CTRLA is read in turn, next the DSCR is read a second time. If the two
  * consecutive read values of the DSCR are the same then we assume both refers
  * to the very same LLI as well as the CTRLA value read inbetween does. For
- * cyclic tranfers, the assumption is that a full loop is "not so fast". If the
+ * cyclic transfers, the assumption is that a full loop is "not so fast". If the
  * two DSCR values are different, we read again the CTRLA then the DSCR till two
  * consecutive read values from DSCR are equal or till the maximum trials is
  * reach. This algorithm is very unlikely not to find a stable value for DSCR.
@@ -700,7 +700,7 @@ static int atc_get_llis_residue(struct at_dma_chan *atchan,
 			break;
 
 		/*
-		 * DSCR has changed inside the DMA controller, so the previouly
+		 * DSCR has changed inside the DMA controller, so the previously
 		 * read value of CTRLA may refer to an already processed
 		 * descriptor hence could be outdated. We need to update ctrla
 		 * to match the current descriptor.

drivers/dma/bcm-sba-raid.c

@@ -15,7 +15,7 @@
  * number of hardware rings over one or more SBA hardware devices. By
  * design, the internal buffer size of SBA hardware device is limited
  * but all offload operations supported by SBA can be broken down into
- * multiple small size requests and executed parallely on multiple SBA
+ * multiple small size requests and executed parallelly on multiple SBA
  * hardware devices for achieving high through-put.
  *
  * The Broadcom SBA RAID driver does not require any register programming
@@ -135,7 +135,7 @@ struct sba_device {
 	u32 max_xor_srcs;
 	u32 max_resp_pool_size;
 	u32 max_cmds_pool_size;
-	/* Maibox client and Mailbox channels */
+	/* Mailbox client and Mailbox channels */
 	struct mbox_client client;
 	struct mbox_chan *mchan;
 	struct device *mbox_dev;

drivers/dma/bcm2835-dma.c

@@ -369,7 +369,7 @@ static struct bcm2835_desc *bcm2835_dma_create_cb_chain(
 	/* the last frame requires extra flags */
 	d->cb_list[d->frames - 1].cb->info |= finalextrainfo;
 
-	/* detect a size missmatch */
+	/* detect a size mismatch */
 	if (buf_len && (d->size != buf_len))
 		goto error_cb;
 

drivers/dma/ep93xx_dma.c

@@ -841,7 +841,7 @@ static dma_cookie_t ep93xx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	desc = container_of(tx, struct ep93xx_dma_desc, txd);
 
 	/*
-	 * If nothing is currently prosessed, we push this descriptor
+	 * If nothing is currently processed, we push this descriptor
 	 * directly to the hardware. Otherwise we put the descriptor
 	 * to the pending queue.
 	 */
@@ -1025,7 +1025,7 @@ ep93xx_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest,
  * @chan: channel
  * @sgl: list of buffers to transfer
  * @sg_len: number of entries in @sgl
- * @dir: direction of tha DMA transfer
+ * @dir: direction of the DMA transfer
  * @flags: flags for the descriptor
  * @context: operation context (ignored)
  *

drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.h

@@ -12,8 +12,8 @@ struct dpaa2_qdma_sd_d {
 	u32 rsv:32;
 	union {
 		struct {
-			u32 ssd:12; /* souce stride distance */
-			u32 sss:12; /* souce stride size */
+			u32 ssd:12; /* source stride distance */
+			u32 sss:12; /* source stride size */
 			u32 rsv1:8;
 		} sdf;
 		struct {
@@ -48,7 +48,7 @@ struct dpaa2_qdma_sd_d {
 #define QDMA_SER_DISABLE	(8) /* no notification */
 #define QDMA_SER_CTX		BIT(8) /* notification by FQD_CTX[fqid] */
 #define QDMA_SER_DEST		(2 << 8) /* notification by destination desc */
-#define QDMA_SER_BOTH		(3 << 8) /* soruce and dest notification */
+#define QDMA_SER_BOTH		(3 << 8) /* source and dest notification */
 #define QDMA_FD_SPF_ENALBE	BIT(30) /* source prefetch enable */
 
 #define QMAN_FD_VA_ENABLE	BIT(14) /* Address used is virtual address */

drivers/dma/hisi_dma.c

@@ -677,7 +677,7 @@ static void hisi_dma_init_hw_qp(struct hisi_dma_dev *hdma_dev, u32 index)
 		writel_relaxed(tmp, addr);
 
 		/*
-		 * 0 - dma should process FLR whith CPU.
+		 * 0 - dma should process FLR with CPU.
 		 * 1 - dma not process FLR, only cpu process FLR.
 		 */
 		addr = q_base + HISI_DMA_HIP09_DMA_FLR_DISABLE +

drivers/dma/idma64.c

@@ -290,7 +290,7 @@ static void idma64_desc_fill(struct idma64_chan *idma64c,
 		desc->length += hw->len;
 	} while (i);
 
-	/* Trigger an interrupt after the last block is transfered */
+	/* Trigger an interrupt after the last block is transferred */
 	lli->ctllo |= IDMA64C_CTLL_INT_EN;
 
 	/* Disable LLP transfer in the last block */
@@ -364,7 +364,7 @@ static size_t idma64_active_desc_size(struct idma64_chan *idma64c)
 	if (!i)
 		return bytes;
 
-	/* The current chunk is not fully transfered yet */
+	/* The current chunk is not fully transferred yet */
 	bytes += desc->hw[--i].len;
 
 	return bytes - IDMA64C_CTLH_BLOCK_TS(ctlhi);