Enable 3C button

Author: oceancolorcoder

Config/sample_SEABIRD_pySAS.cfg

@@ -157,8 +157,8 @@
     "bL2EnablePercentLt": 1,
     "fL2PercentLt": 10.0,
     "fL2RhoSky": 0.0256,
-    "bL23CRho": 0,
-    "bL2Z17Rho": 1,
+    "bL23CRho": 1,
+    "bL2Z17Rho": 0,
     "bL2M99Rho": 0,
     "bL2RhoUnc10": 0,
     "bL2PerformNIRCorrection": 1,

Config/sample_SEABIRD_pySAS.hdr

@@ -31,7 +31,7 @@
     "east_longitude": "",
     "west_longitude": "",
     "nadir": "40",
-    "rho_correction": "Z17",
+    "rho_correction": "3C",
     "NIR_residual_correction": "MA95",
     "BRDF_correction": "noBRDF",
     "comments": "! HyperInSPACE vers = 1.2.15\n! HyperInSPACE Config = sample_SEABIRD_pySAS.cfg\n! Rotator Home Angle = 0.0\n! Rotator Delay = 2.0\n! Pitch/Roll Filter = On\n! Max Pitch/Roll = 5.0\n! Rotator Min/Max Filter = On\n! Rotator Min = -126.0\n! Rotator Max = 42.0\n! Rel Azimuth Filter = On\n! Rel Azimuth Min = 87.0\n! Rel Azimuth Max = 138.0\n! Deglitch Filter = On\n! ES Dark Window = 11\n! ES Light Window = 5\n! ES Dark Sigma = 3.2\n! ES Light Sigma = 2.5\n! LI Dark Window = 11\n! LI Light Window = 5\n! LI Dark Sigma = 3.0\n! LI Light Sigma = 2.9\n! LT Dark Window = 11\n! LT Light Window = 5\n! LT Dark Sigma = 3.5\n! LT Light Sigma = 2.9\n! FRM Pathway = FRM-Full-Characterization\n! Thermal Source = Internal_Thermistor\n! Default Salt = 38.0\n! Default SST = 28.0\n! Default AOD = 0.2\n! Default Wind = 5.0\n! Default AirTemp = 26.0\n! Wavelength Interp Int = 3.3\n! Max Wind = 10.0\n! Min SZA = 20.0\n! Max SZA = 60.0\n! Spectral Filter = On\n! Filter Sigma Es = 5.0\n! Filter Sigma Li = 8.0\n! Filter Sigma Lt = 3.0\n! Meteorological Filter = On\n! Cloud Flag = 1.0\n! Es Flag = 2.0\n! Dawn/Dusk Flag = 1.0\n! Rain/Humidity Flag = 1.095\n! Ensemble Interval = 300\n! Percent Lt Filter = On\n! Percent Light = 10.0\n! Remove Negatives = On",

Config/sample_TRIOS_NOTRACKER.cfg

@@ -133,9 +133,9 @@
     "bL2EnablePercentLt": 1,
     "fL2PercentLt": 10.0,
     "fL2RhoSky": 0.0256,
-    "bL23CRho": 0,
+    "bL23CRho": 1,
     "bL2Z17Rho": 0,
-    "bL2M99Rho": 1,
+    "bL2M99Rho": 0,
     "bL2RhoUnc10": 0,
     "bL2PerformNIRCorrection": 0,
     "bL2SimpleNIRCorrection": 0,
@@ -160,7 +160,6 @@
     "seaBASSHeaderFileName": "sample_TRIOS_NOTRACKER.hdr",
     "bL2SaveSeaBASS": 0,
     "bL2WriteReport": 0,
-    "bL2filterMetFlags": 0,
     "bL2EnableQualityFlags": 1,
     "serialNumber": {
         "ES": "SAM_8329",

Config/sample_TRIOS_NOTRACKER.hdr

@@ -31,7 +31,7 @@
     "east_longitude": "",
     "west_longitude": "",
     "nadir": "40",
-    "rho_correction": "M99",
+    "rho_correction": "3C",
     "NIR_residual_correction": "NA",
     "BRDF_correction": "L11",
     "comments": "! HyperInSPACE vers = 1.2.15\n! HyperInSPACE Config = sample_TRIOS_NOTRACKER.cfg\n! Rotator Home Angle = 0.0\n! Rotator Delay = 2.0\n! Pitch/Roll Filter = Off\n! Max Pitch/Roll = 5.0\n! Rotator Min/Max Filter = Off\n! Rotator Min = -40.0\n! Rotator Max = 40.0\n! Rel Azimuth Filter = On\n! Rel Azimuth Min = 90.0\n! Rel Azimuth Max = 135.0\n! Deglitch Filter = Off\n! ES Dark Window = 11\n! ES Light Window = 5\n! ES Dark Sigma = 3.2\n! ES Light Sigma = 2.3\n! LI Dark Window = 11\n! LI Light Window = 5\n! LI Dark Sigma = 3.3\n! LI Light Sigma = 3.0\n! LT Dark Window = 11\n! LT Light Window = 13\n! LT Dark Sigma = 3.2\n! LT Light Sigma = 2.7\n! FRM Pathway = FRM-Full-Characterization\n! Thermal Source = Air_Termperature\n! Default Salt = 35.0\n! Default SST = 26.0\n! Default AOD = 0.2\n! Default Wind = 5.0\n! Default AirTemp = 26.0\n! Wavelength Interp Int = 3.3\n! Max Wind = 10.0\n! Min SZA = 20.0\n! Max SZA = 60.0\n! Spectral Filter = On\n! Filter Sigma Es = 5.0\n! Filter Sigma Li = 8.0\n! Filter Sigma Lt = 3.0\n! Meteorological Filter = On\n! Cloud Flag = 1.0\n! Es Flag = 2.0\n! Dawn/Dusk Flag = 1.0\n! Rain/Humidity Flag = 1.095\n! Ensemble Interval = 300\n! Percent Lt Filter = On\n! Percent Light = 10.0\n! Remove Negatives = On",

Source/ConfigWindow.py

@@ -1404,7 +1404,8 @@ def l1bGetAncUntickIfNoCredentials(self,ancillarySource):
             elif ancillarySource == 'ECMWF_ADS':
                 ConfigFile.settings["bL1bGetAnc"] = 2
             self.RhoRadioButtonZhang.setDisabled(0)
-            self.RhoRadioButton3C.setDisabled(1)
+            # self.RhoRadioButton3C.setDisabled(1)
+            self.RhoRadioButton3C.setDisabled(0)
         else:
             ConfigFile.settings["bL1bGetAnc"] = 0
             self.l1bGetAncCheckBox1.setChecked(False)