fix errors breaking extra_[cmake_]configs.py

Author: kilograham

src/rp2_common/pico_cyw43_driver/CMakeLists.txt

@@ -55,47 +55,6 @@ if (EXISTS ${PICO_CYW43_DRIVER_PATH}/${CYW43_DRIVER_TEST_FILE})
             hardware_dma
             hardware_exception
             )
-    # commented out as I don't think there is a major use case for these to be settable from CMake command line vs board header, or target_compile_defitions
-#    if (CYW43_PIN_WL_DYNAMIC)
-#        # PICO_CMAKE_CONFIG: CYW43_PIN_WL_DYNAMIC, flag to indicate if cyw43 SPI pins can be changed at runtime, type=bool, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIN_WL_DYNAMIC=${CYW43_PIN_WL_DYNAMIC})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_REG_ON)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_REG_ON, gpio pin to power up the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_REG_ON=${CYW43_DEFAULT_PIN_WL_REG_ON})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_DATA_OUT)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_OUT, gpio pin for spi data out to the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_OUT=${CYW43_DEFAULT_PIN_WL_DATA_OUT})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_DATA_IN)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_IN, gpio pin for spi data in from the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_IN=${CYW43_DEFAULT_PIN_WL_DATA_IN})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_HOST_WAKE)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_HOST_WAKE, gpio (irq) pin for the irq line from the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_HOST_WAKE=${CYW43_DEFAULT_PIN_WL_HOST_WAKE})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_CLOCK)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CLOCK, gpio pin for the spi clock line to the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CLOCK=${CYW43_DEFAULT_PIN_WL_CLOCK})
-#    endif()
-#    if (CYW43_DEFAULT_PIN_WL_CS)
-#        # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CS, gpio pin for the spi chip select to the cyw43 chip, type=int, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CS=${CYW43_DEFAULT_PIN_WL_CS})
-#    endif()
-#    if (CYW43_PIO_CLOCK_DIV_INT)
-#        # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_INT, integer component of pio clock divider used for cyw43 comms, type=int, default=2, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_INT=${CYW43_PIO_CLOCK_DIV_INT})
-#    endif()
-#    if (CYW43_PIO_CLOCK_DIV_FRAC8)
-#        # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_FRAC8, fractional component of pio clock divider used for cyw43 comms in range 0-255, type=int, default=0, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_FRAC8=${CYW43_PIO_CLOCK_DIV_FRAC8})
-#    endif()
-#    if (CYW43_PIO_CLOCK_DIV_DYNAMIC)
-#        # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_DYNAMIC, flag used to enable dynamic pio clock divider API, type=bool, default=0, group=pico_cyw43_driver
-#        target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_DYNAMIC=${CYW43_PIO_CLOCK_DIV_DYNAMIC})
-#    endif()
 
     # Note: This is used by MP, so check for issues when making changes
     # e.g. Don't add new depenedences

src/rp2_common/pico_stdio_usb/include/pico/stdio_usb.h

@@ -73,7 +73,7 @@
 
 // PICO_CONFIG: PICO_STDIO_USB_RESET_BOOTSEL_ACTIVITY_LED, Optionally define a pin to use as bootloader activity LED when BOOTSEL mode is entered via USB (either VIA_BAUD_RATE or VIA_VENDOR_INTERFACE), type=int, min=0, max=47 on RP2350B, 29 otherwise, group=pico_stdio_usb
 
-// PICO_CONFIG: PICO_STDIO_USB_RESET_BOOTSEL_ACTIVITY_LED_ACTIVE_LOW, Whether pin to use as bootloader activity LED when BOOTSEL mode is entered via USB (either VIA_BAUD_RATE or VIA_VENDOR_INTERFACE) is active low, type=bool, default=0, group=pico_stdio_usb
+// PICO_CONFIG: PICO_STDIO_USB_RESET_BOOTSEL_FIXED_ACTIVITY_LED_ACTIVE_LOW, Whether pin to use as bootloader activity LED when BOOTSEL mode is entered via USB (either VIA_BAUD_RATE or VIA_VENDOR_INTERFACE) is active low, type=bool, default=0, group=pico_stdio_usb
 #ifndef PICO_STDIO_USB_RESET_BOOTSEL_FIXED_ACTIVITY_LED_ACTIVE_LOW
 #define PICO_STDIO_USB_RESET_BOOTSEL_FIXED_ACTIVITY_LED_ACTIVE_LOW 0
 #endif