Moved identitymanager images

Author: stuart-jaeckel-netwrix

docs/endpointpolicymanager/applicationsettings/preconfigured/firefox/securityenterpriseroots.md

@@ -27,7 +27,7 @@ Security.enterprise_roots.enabled
 Using the Firefox About:Config Pak J thru Z.  
 It is the last entry in the S: category
 
-![2017-08-16_0800_(1)](</img/product_docs/endpointpolicymanager/endpointpolicymanager/applicationsettings/preconfigured/firefox/2017-08-16_0800_(1).webp>)
+![2017-08-16_0800_(1)](</img/product_docs/endpointpolicymanager/applicationsettings/preconfigured/firefox/2017-08-16_0800.webp>)
 
 Note that if you're looking for general advice in how to get started with Windows certificates and
 browsers support, you

docs/endpointpolicymanager/license/virtualization/tool.md

@@ -8,7 +8,7 @@ report on your maximum inbound connections. In short, LT can only look for these
 when running on a Windows server and not a Windows client machine. That is what this message is
 about.
 
-![352_2_image001](</img/product_docs/endpointpolicymanager/endpointpolicymanager/license/virtualization/352_1_image001_(1).webp>)
+![352_2_image001](</img/product_docs/endpointpolicymanager/license/virtualization/352_1_image001.webp>)
 
 **NOTE:** Sometimes LT can acquired the correct number of RDS connections, and sometimes it cannot.
 

docs/identitymanager/6.1/installation-guide/overview/index.md

@@ -6,7 +6,7 @@ installation setup that fits best your organization's needs.
 
 ## Usercube Components and Data Flow
 
-![Components & Data Flow](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/overview/components_data_flow.webp)
+![Components & Data Flow](/img/product_docs/identitymanager/6.1/installation-guide/overview/components_data_flow.webp)
 
 ### Components
 
@@ -92,7 +92,7 @@ can be spread between several workstations. Two scenarios unfold:
 
 This approach is useful when managed systems need to run on separate and isolated networks.
 
-![Server & Agents isolated](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/overview/distribution_1.webp)
+![Server & Agents isolated](/img/product_docs/identitymanager/6.1/installation-guide/overview/distribution_1.webp)
 
 #### **2.** The Server and one Agent are installed on the same workstation
 
@@ -101,7 +101,7 @@ workstation would **only host a Usercube Server process** (with the integrated a
 separate agent needs to be installed. The database could be installed on the same workstation or on
 a separate one.
 
-![Server & Agent together](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/overview/distribution_2.webp)
+![Server & Agent together](/img/product_docs/identitymanager/6.1/installation-guide/overview/distribution_2.webp)
 
 ## Authentication
 

docs/identitymanager/6.1/installation-guide/production-ready/agent/index.md

@@ -90,7 +90,7 @@ The following is
 
 To sum up IIS settings:
 
-![IIS Settings](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/server/iis_settings.webp)
+![IIS Settings](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/server/iis_settings.webp)
 
 ## Hosting Bundle
 
@@ -219,7 +219,7 @@ The agent service account that was chosen in the previous step:
     5. Select the newly added user name in the **Group or user names** panel at the top of the
        window.
 
-        ![Object Names](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/server/enter-the-object-names-to-select.webp)
+        ![Object Names](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/server/enter-the-object-names-to-select.webp)
 
     6. Check the `Allow` column for the
        [relevant permissions](/docs/identitymanager/6.1/installation-guide/requirements/server-requirements/index.md).

docs/identitymanager/6.1/installation-guide/production-ready/database/index.md

@@ -44,7 +44,7 @@ and
 - Locate the database name dropdown, next to the **Execute** button in the top left section of the
   screen.
 
-![Execute Query](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/database/execute_query.webp)
+![Execute Query](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/database/execute_query.webp)
 
 - From the dropdown, select the newly created database.
 - Click **Execute**.

docs/identitymanager/6.1/installation-guide/production-ready/server/index.md

@@ -77,7 +77,7 @@ The following is
 
 To sum up IIS settings:
 
-![IIS Settings](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/server/iis_settings.webp)
+![IIS Settings](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/server/iis_settings.webp)
 
 An SSL Certificate should also be
 [set to the IIS Server](https://docs.microsoft.com/en-US/iis/manage/configuring-security/how-to-set-up-ssl-on-iis)
@@ -194,7 +194,7 @@ This guide will show you how to perform these operations using SQL Server Manage
     **6** or **7**.
 14. Grant the **Administer bulk operations** permission.
 
-    ![Bulk](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/server/bulk.webp)
+    ![Bulk](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/server/bulk.webp)
 
 15. Confirm with **OK**.
 
@@ -245,7 +245,7 @@ The Usercube Server service account that was chosen in the previous step:
     5. Select the newly added user name in the **Group or user names** panel at the top of the
        window.
 
-        ![Object Names](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/production-ready/server/enter-the-object-names-to-select.webp)
+        ![Object Names](/img/product_docs/identitymanager/6.1/installation-guide/production-ready/server/enter-the-object-names-to-select.webp)
 
     6. Check the `Allow` column for the
        [relevant permissions](/docs/identitymanager/6.1/installation-guide/requirements/server-requirements/index.md).

docs/identitymanager/6.1/installation-guide/quick-start/index.md

@@ -20,15 +20,15 @@ The installation of Usercube requires:
 **Step 1 –** Go on the [Netwrix portal](https://www.netwrix.com/sign_in.html?rf=my_products.html)
 and download the artifacts of the expected version.
 
-![Extranet Artifacts](/img/versioned_docs/identitymanager_6.1/identitymanager/migration-guide/extranet_v601.webp)
+![Extranet Artifacts](/img/product_docs/identitymanager/6.1/migration-guide/extranet_v601.webp)
 
 **Step 2 –** Extract from SDK the folder UsercubeBootstrap anywhere on the computer.
 
 **Step 3 –** Extract the content of Runtime to UsercubeBootstrap.
 
 When extracting UsercubeBootstrap to the root of the computer, it looks like:
 
-![Project Directory](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/quick-start/directory_v602.webp)
+![Project Directory](/img/product_docs/identitymanager/6.1/installation-guide/quick-start/directory_v602.webp)
 
 **Step 4 –** Move or copy your certificate inside the Runtime folder.
 
@@ -74,7 +74,7 @@ In our example, the command would be, still in the Runtime folder:
 as a username and the password specified in the Runtime/appsettings.json file, in the Authentication
 section.
 
-![Authentication Dialog](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/quick-start/authentication_v601.webp)
+![Authentication Dialog](/img/product_docs/identitymanager/6.1/installation-guide/quick-start/authentication_v601.webp)
 
 Now you can start using the application.
 
@@ -83,7 +83,7 @@ Now you can start using the application.
 From there, you can start setting up Usercube via the **Settings** page which is accessible from the
 **Configuration** section of the home page.
 
-![Home Page - Settings](/img/versioned_docs/identitymanager_6.1/identitymanager/user-guide/set-up/user-profile-configuration/home_settings_v523.webp)
+![Home Page - Settings](/img/product_docs/identitymanager/6.1/user-guide/set-up/user-profile-configuration/home_settings_v523.webp)
 
 Then, Netwrix recommends following the user guide to start the configuration of your IGA project
 from scratch. See the [User Guide](/docs/identitymanager/6.1/user-guide/index.md)

docs/identitymanager/6.1/installation-guide/reverse-proxy/index.md

@@ -11,19 +11,19 @@ A reverse proxy is usually used when:
 - needing to encrypt the requests from/to end-users on the one hand, and on the other hand to be
   able to monitor plain text requests from/to Usercube's server;
 
-    ![Proxy Purposes: Encryption](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/reverse-proxy/proxy_purpose_encryption.webp)
+    ![Proxy Purposes: Encryption](/img/product_docs/identitymanager/6.1/installation-guide/reverse-proxy/proxy_purpose_encryption.webp)
 
 - installing Usercube with an integrated agent on a network isolated from the users' browsers, in
   order to be able to access sensitive systems which are protected by being set up on a network
   isolated from the Internet;
 
-    ![Proxy Installation Example](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/reverse-proxy/proxy_example.webp)
+    ![Proxy Installation Example](/img/product_docs/identitymanager/6.1/installation-guide/reverse-proxy/proxy_example.webp)
 
     This installation will be used for the configuration examples below.
 
 - using several Usercube's server instances for load-balancing purposes.
 
-    ![Proxy Purposes: Load Balancing](/img/versioned_docs/identitymanager_6.1/identitymanager/installation-guide/reverse-proxy/proxy_purpose_loadbalancing.webp)
+    ![Proxy Purposes: Load Balancing](/img/product_docs/identitymanager/6.1/installation-guide/reverse-proxy/proxy_purpose_loadbalancing.webp)
 
 As Usercube is session-less, working with several servers does not imply the need to synchronize
 sessions between servers, nor the need to guarantee that a particular IP will be processed by a

docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/index.md

@@ -9,15 +9,15 @@ Get an access token by proceeding as follows:
 1. Launch Postman.
 2. Create a new request by clicking on **+ New** then **Request**.
 
-    ![Postman: New Request](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_newrequest.webp)
+    ![Postman: New Request](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_newrequest.webp)
 
 3. Fill in the fields and click on **Save to Usercube**.
 
-    ![Postman: New Request Fields](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_requestfields.webp)
+    ![Postman: New Request Fields](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_requestfields.webp)
 
 4. Fill in the authentication information as follows:
 
-    ![Postman: Authentication](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_authentication.webp)
+    ![Postman: Authentication](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_authentication.webp)
 
     - **Method**: POST
     - **URL**: `<URL Usercube>`/connect/token
@@ -29,7 +29,7 @@ Get an access token by proceeding as follows:
 
 5. Click on **Send** and get the access token from the response body.
 
-    ![Postman: Access Token](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_accesstoken.webp)
+    ![Postman: Access Token](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_accesstoken.webp)
 
 ## Use an Access Token
 
@@ -38,7 +38,7 @@ Use an access token by proceeding as follows:
 1. Create a new request in Postman.
 2. Fill in the authorization information as follows:
 
-    ![Postman: Authorization](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_authorization.webp)
+    ![Postman: Authorization](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_authorization.webp)
 
     - **Method**: GET
     - **URL**: `<URL Usercube>`/`<URI of the API to call>`?api-version=1.0
@@ -48,7 +48,7 @@ Use an access token by proceeding as follows:
 
 3. Click on **Send** and get the result from the response body.
 
-    ![Postman: Access Token Result](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_accesstokenresult.webp)
+    ![Postman: Access Token Result](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_accesstokenresult.webp)
 
 ## Create a Combined Request
 
@@ -57,7 +57,7 @@ Create a combined request by proceeding as follows:
 1. Create a new request in Postman.
 2. Fill in the authorization information as follows:
 
-    ![Postman: Authorization (Combined Request)](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_authorizationcombined.webp)
+    ![Postman: Authorization (Combined Request)](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_authorizationcombined.webp)
 
     - **Method**: GET
     - **URL**: `<URL Usercube>`/`<URI of the API to call>`?api-version=1.0
@@ -67,7 +67,7 @@ Create a combined request by proceeding as follows:
 
 3. Click on **Get New Access Token** and fill in the fields as follows:
 
-    ![Postman: New Access Token Fields (Combined Request)](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_newaccesstokencombined.webp)
+    ![Postman: New Access Token Fields (Combined Request)](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_newaccesstokencombined.webp)
 
     - **Token Name**: `<Token Name>`
     - **Grant Type**: Client Credentials
@@ -82,8 +82,8 @@ Create a combined request by proceeding as follows:
 
 4. Click on **Request Token** to get the token.
 
-    ![Postman: Get Token (Combined Request)](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_gettokencombined.webp)
+    ![Postman: Get Token (Combined Request)](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_gettokencombined.webp)
 
 5. Click on **Use Token** and **Send** and get the result from the response body.
 
-    ![Postman: Access Token Result (Combined Request)](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/how-tos/request-postman/postman_accesstokenresult.webp)
+    ![Postman: Access Token Result (Combined Request)](/img/product_docs/identitymanager/6.1/integration-guide/api/how-tos/request-postman/postman_accesstokenresult.webp)

docs/identitymanager/6.1/integration-guide/api/index.md

@@ -12,7 +12,7 @@ The page `[Usercube application's URL]/swagger` can be used to explore and test
 This page is built by the [Swagger UI tool](https://swagger.io/tools/swagger-ui/) from the Usercube
 [OpenAPI](https://swagger.io/specification/) definition.
 
-![Usercube server swagger page](/img/versioned_docs/identitymanager_6.1/identitymanager/integration-guide/api/swagger.webp)
+![Usercube server swagger page](/img/product_docs/identitymanager/6.1/integration-guide/api/swagger.webp)
 
 A function can have several versions. This is why the API description is split into several OpenAPI
 definition files.