Merge pull request #124 from netwrix/corbinada/eppm-finalformatting

Corbinada/eppm finalformatting

Author: AdaOrdace

.vscode/settings.json

@@ -1,4 +1,3 @@
 {
   "git.ignoreLimitWarning": true,
-  ]
 }

docs/endpointpolicymanager/fastest.md

@@ -28,8 +28,11 @@ If none of the times work for you, contact your Endpoint Policy Manager sales pe
 It will help you to quickly understand all the moving parts to Endpoint Policy Manager and it
 answers more than 90% of use cases and installation questions.
 
-**_RECOMMENDED:_** Learn about what you already own/what it can do. Sign up for the IT Admin webinar
+:::info
+Learn about what you already own/what it can do. Sign up for the IT Admin webinar
 at: [https://www.endpointpolicymanager.com/demo/](https://www.endpointpolicymanager.com/demo/)
+:::
+
 
 ## Verify Logins for Portal and Cloud
 
@@ -48,7 +51,10 @@ Login page at Endpoint Policy Manager.com:
 - If you are unable to logon as expected as a customer, open a ticket to contact
   [Netwrix Support](https://www.netwrix.com/tickets.html#netwrix-support).
 
-**NOTE:** The credentials are not shared or single sign on between Portal and Cloud service.
+:::note
+The credentials are not shared or single sign on between Portal and Cloud service.
+:::
+
 
 ## Quick Start and Implementation Topics
 
@@ -93,13 +99,19 @@ way to get oriented on the navigation.
 
 ## Get Help from Support
 
-**CAUTION:** Email is no longer monitored at the old support @endpointpolicymanager.com email address.
+:::warning
+Email is no longer monitored at the old support @endpointpolicymanager.com email address.
+:::
+
 
 To get help during a Trial or as a customer, it is the same motion. Open a ticket to contact
 [Netwrix Support](https://www.netwrix.com/tickets.html#netwrix-support).
 
-**NOTE:** The Netwrix ticket portal is another set of credentials and is not related to Endpoint
+:::note
+The Netwrix ticket portal is another set of credentials and is not related to Endpoint
 Policy Manager Portal or Endpoint Policy Manager Cloud.
+:::
+
 
 Reasons to Contact Endpoint Policy Manager Support
 

docs/endpointpolicymanager/gettingstarted.md

@@ -19,9 +19,12 @@ Policy Manager sales associate.
 
 Figure 1. Inside the Endpoint Policy Manager Customer Portal.
 
-**NOTE:** Video: For an overview on how to use the Endpoint Policy Manager Customer Portal and
+:::note
+Video: For an overview on how to use the Endpoint Policy Manager Customer Portal and
 understand subscriptions, please watch the following video:
 [https://www.endpointpolicymanager.com/video/endpointpolicymanager-portal-how-to-download-endpointpolicymanager-and-get-free-training.html](https://www.endpointpolicymanager.com/video/endpointpolicymanager-portal-how-to-download-endpointpolicymanager-and-get-free-training.html)
+:::
+
 
 Go to the Download section and select "Download Everything (Bits, Paks, Manuals but not Advice),"
 and you will get a ZIP file with manuals. You will also receive the following:

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/designstudio/creation.md

@@ -9,9 +9,12 @@ sidebar_position: 20
 If you have a situation which required Netwrix Endpoint Policy Manager (formerly PolicyPak) Tech
 Support to help you update a AppSet from your own system, these are the instructions.
 
-**NOTE:** To use the Endpoint Policy Manager DesignStudio, you will need the following components
+:::note
+To use the Endpoint Policy Manager DesignStudio, you will need the following components
 pre-installed on your Endpoint Policy Manager Creation Station. The machine you put these components
 on should match the END-POINTS you wish to deploy your AppSet to.
+:::
+
 
 It's best if the Endpoint Policy Manager Creation Station is a machine that you can use and re-use
 again. We suggest you use a virtual machine loaded with the following components, which you can then

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/generalconfiguration/language.md

@@ -32,5 +32,8 @@ Policy Manager AppLock™ should function as expected.
 To be safe, you're welcome to fully try out Endpoint Policy Manager Application Manager before you
 purchase to make sure it works as expected.
 
-**NOTE:** Endpoint Policy Manager (the company) will not be able to do this for you; but you are
+:::note
+Endpoint Policy Manager (the company) will not be able to do this for you; but you are
 welcome to use the Endpoint Policy Manager DesignStudio for this purpose.
+
+:::

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/generalconfiguration/windowsremoteassistance.md

@@ -41,7 +41,10 @@ Properties"
 **Step 7 –** Select the Remote tab, and select the checkbox "Allow Remote Assistance connections to
 this computer" and then click the OK button.
 
-**NOTE:** Make sure that the selection is underlined as shown in the screenshot.
+:::note
+Make sure that the selection is underlined as shown in the screenshot.
+:::
+
 
 ![686_11_image-20200330200932-6](/img/product_docs/endpointpolicymanager/applicationsettings/686_11_image-20200330200932-6.webp)
 

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/preconfiguredappsets/allowremember.md

@@ -20,8 +20,11 @@ website.com, plugin:java, allow
 
 ![132_2_ff-kb-img-02](/img/product_docs/endpointpolicymanager/applicationsettings/preconfigured/firefox/132_2_ff-kb-img-02.webp)
 
-**NOTE:** You might also need to add these lines as well, if adding the one line above doesn't work.
+:::note
+You might also need to add these lines as well, if adding the one line above doesn't work.
 It depends on the version of Firefox you have installed. Older versions require these lines:
+:::
+
 
 ```
 website.com, plugin-vulnerable:npdeployjava, allow website.com, plugin:npdeployjava, allow

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/preconfiguredappsets/transition.md

@@ -34,9 +34,12 @@ items to workaround and fix it:
 - The AppSet itself which needed to be recompiled with some Endpoint Policy Manager DesignStudio
   updates.
 
-**NOTE:** If you are using the Endpoint Policy Manager DesignStudio yourself to make any changes to
+:::note
+If you are using the Endpoint Policy Manager DesignStudio yourself to make any changes to
 the Firefox 23 AppSet, you will need to re-compile with the latest Endpoint Policy Manager
 DesignStudio and then perform the steps listed below.
+:::
+
 
 This document is to help guide you through the required transition.
 
@@ -46,9 +49,12 @@ FF115.
 You can acquire the updated FireFox AppSet 115 in the Endpoint Policy Manager Portal within the
 AppSets downloads.
 
-**NOTE:** It is recommended, though not strictly required that you also update your management
+:::note
+It is recommended, though not strictly required that you also update your management
 station to the latest Endpoint Policy Manager MMC snap-in. In doing so the screenshots shown here
 will match the steps you will be performing.
+:::
+
 
 ## Functional Matrix of Firefox, CSE and AppSet
 
@@ -73,10 +79,13 @@ to the machines with the new 23.10 and later CSE. During this guide you will use
 Targeting to ensure that the older FF23 AppSet cannot work with, and shouldn't be applied to newer
 CSEs; therefore we need to ensure that the newer FF115 AppSet only applies to the newer CSEs.
 
-**NOTE:** This document mostly focuses on Group Policy Object delivery of the Firefox Endpoint
+:::note
+This document mostly focuses on Group Policy Object delivery of the Firefox Endpoint
 Policy Manager AppSet. Note you may have other ways to deliver the FireFox Endpoint Policy Manager
 AppSet like Endpoint Policy Manager Cloud, local GPOs, and/or XML data files (via MSI files.) Be
 sure to perform this same operation using any and all methods.
+:::
+
 
 ## Finding all GPOs with Endpoint Policy Manager Application Settings Manager Data
 
@@ -134,7 +143,10 @@ the file out.
 See the
 [What are the two ways to export AppSet settings and why would I use one over the other?](/docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/troubleshooting/appset.md)
 
-**NOTE:** You will use the resulting XML file in an upcoming step and not only for backup purposes.
+:::note
+You will use the resulting XML file in an upcoming step and not only for backup purposes.
+:::
+
 
 ### Back up 4: Backing up your Firefox 23 AppSet DLL
 
@@ -209,8 +221,11 @@ Item Level Targeting Validation tool to test how ILT will operate. See the
 [Troubleshooting ILT with the ILT Validator Tool](/docs/endpointpolicymanager/knowledgebase/applicationmanager/videolearningcenter/featurestechsupport/itemleveltargeting.md)
 topic for additional information.
 
-**NOTE:** You will have to trim the ILT part of the output to eliminate the `<ILTFilters>` at the
+:::note
+You will have to trim the ILT part of the output to eliminate the `<ILTFilters>` at the
 beginning and `</ILTFilters>` at the end.
+:::
+
 
 ![939_8_image-20231101213809-8_950x453](/img/product_docs/endpointpolicymanager/applicationsettings/preconfigured/firefox/939_8_image-20231101213809-8_950x453.webp)
 
@@ -238,8 +253,11 @@ Use these instructions to add the AppSet to a Share:
 For example in the Endpoint Policy Manager Central Store you simply add the pp-Mozilla Firefox
 115.DLL.
 
-**NOTE:** You may leave your existing pp-Mozilla Firefox 23 aboutconfig A to I and J to Z.DLL files
+:::note
+You may leave your existing pp-Mozilla Firefox 23 aboutconfig A to I and J to Z.DLL files
 in place without modification.
+:::
+
 
 ![939_12_image-20231101213809-12_950x406](/img/product_docs/endpointpolicymanager/applicationsettings/preconfigured/firefox/939_12_image-20231101213809-12_950x406.webp)
 

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/troubleshooting/code0xc000428.md

@@ -33,13 +33,19 @@ Disable the PolicyPak AppLock(TM) feature in the Endpoint Policy Manager CSE.
 
 Endpoint Policy ManagerAppLock is the feature in PP App Manager which GRAYS or HIDES UI elements.
 
-**NOTE:** Endpoint Policy Manager AppLock is NOT related to Microsoft AppLocker.
+:::note
+Endpoint Policy Manager AppLock is NOT related to Microsoft AppLocker.
+:::
+
 
 Here is the Endpoint Policy Manager side workaround if you are encountering this error:
 
 [How do I turn AppLock off or on based upon the CSE version I'm using?](/docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/troubleshooting/disable.md)
 
-**NOTE:** IIn general it is NOT recommended to stop Endpoint Policy Manager AppLock.
+:::note
+IIn general it is NOT recommended to stop Endpoint Policy Manager AppLock.
+:::
+
 
 ## WORKAROUND 2
 

docs/endpointpolicymanager/knowledgebase/applicationmanager/knowledgebase/troubleshooting/disable.md

@@ -30,8 +30,11 @@ with security software you might have on your endpoints.
   applications.)
 - AppLock is already turned off by default in newer versions of the CSE (for Win32 applications.)
 
-**NOTE:** AppLock's actions may not be turned off (ever) for Eclipse ISE (aka Java Control Panel
+:::note
+AppLock's actions may not be turned off (ever) for Eclipse ISE (aka Java Control Panel
 applets) or Firefox, but only for Win32 applications.
+:::
+
 
 You can witness PPAppLockLdr64.dll injected into processes by using Process Explorer. An example can
 be seen here with Win32 app NotepadP. Using the Process Explorer Search you may also look for other
@@ -87,5 +90,8 @@ and new state. Here's an example GPO with the old name and old state:
 
 ![applock8](/img/product_docs/endpointpolicymanager/troubleshooting/applicationsettings/applock/applock8.webp)
 
-**NOTE:** You might need to close the GPMC and re-open it to have the GPMC refresh the ADMX / ADML
+:::note
+You might need to close the GPMC and re-open it to have the GPMC refresh the ADMX / ADML
 files and reflect a change. Then re-run the GPO setting report to verify your change.
+
+:::