Remove anchors to H1 headings and lowercase all anchors.

Author: mckibbenc

docs/ActivityMonitor/Config/CTERA/Activity.md

@@ -77,7 +77,7 @@ See the [Managing the CTERA Messaging Service](https://kb.ctera.com/docs/managin
 __Step 4 –__ Deploying the messaging service takes a few minutes. The status will change to STARTING and then to ACTIVE. Wait until the status is ACTIVE before proceeding to the next step.
 
 __NOTE:__ If the status does not change to ACTIVE, the log files need to be collected from ```/usr/local/lib/ctera/work/logs/services``` directory.   
-See the [CTERA Messaging Service Logs](https://kb.ctera.com/docs/setting-up-the-ctera-messaging-service-2#CTERA-Messaging-Service-Logs) article for additional information.
+See the [CTERA Messaging Service Logs](https://kb.ctera.com/docs/setting-up-the-ctera-messaging-service-2#ctera-messaging-service-logs) article for additional information.
 
 ### Enable the Edge Filer Syslog Service
 

docs/ActivityMonitor/Config/DellCelerraVNX/Activity.md

@@ -30,7 +30,7 @@ Checklist Item 2: Install Dell CEE
 Checklist Item 3: Dell Device Configuration
 
 - Configure the ```cepp.conf``` file on the Celerra VNX Cluster
-- See the [Connect Data Movers to the Dell CEE Server](/docs/activitymonitor/config/dellcelerravnx/installcee.md#Connect-Data-Movers-to-the-Dell-CEE-Server) topic for instructions.
+- See the [Connect Data Movers to the Dell CEE Server](/docs/activitymonitor/config/dellcelerravnx/installcee.md#connect-data-movers-to-the-dell-cee-server) topic for instructions.
 
 Checklist Item 4: Activity Monitor Configuration
 

docs/ActivityMonitor/Config/DellCelerraVNX/InstallCEE.md

@@ -17,7 +17,7 @@ __Step 2 –__ Follow the instructions in the Dell [Using the Common Event Enabl
 
 ___RECOMMENDED:___ The latest version of .NET Framework and Dell CEE is recommended to use with the asynchronous bulk delivery (VCAPS) feature.
 
-See the [CEE Debug Logs](/docs/activitymonitor/config/dellunity/validate.md#CEE-Debug-Logs) section for information on troubleshooting issues related to Dell CEE.
+See the [CEE Debug Logs](/docs/activitymonitor/config/dellunity/validate.md#cee-debug-logs) section for information on troubleshooting issues related to Dell CEE.
 
 After Dell CEE installation is complete, it is necessary to [Connect Data Movers to the Dell CEE Server](#Connect-Data-Movers-to-the-Dell-CEE-Server).
 

docs/ActivityMonitor/Config/DellCelerraVNX/Validate.md

@@ -4,7 +4,7 @@ Once the Activity Monitor agent is configured to monitor the Dell device, the au
 
 ## Validate Dell CEE Registry Key Settings
 
-__NOTE:__ See the [Configure Dell Registry Key Settings](/docs/activitymonitor/config/dellunity/installcee.md#Configure-Dell-Registry-Key-Settings) topic for information on manually setting the registry key.
+__NOTE:__ See the [Configure Dell Registry Key Settings](/docs/activitymonitor/config/dellunity/installcee.md#configure-dell-registry-key-settings) topic for information on manually setting the registry key.
 
 After the Activity Monitor activity agent has been configured to monitor the Dell device, it will configure the Dell CEE automatically if it is installed on the same server as the agent. This needs to be set manually in the rare situations where it is necessary for the Dell CEE to be installed on a different server than the Windows proxy server(s) where the Activity Monitor activity agent is deployed.
 

docs/ActivityMonitor/Config/DellPowerScale/InstallCEE.md

@@ -17,7 +17,7 @@ __Step 2 –__ Follow the instructions in the Dell [Using the Common Event Enabl
 
 ___RECOMMENDED:___ The latest version of .NET Framework and Dell CEE is recommended to use with the asynchronous bulk delivery (VCAPS) feature.
 
-After installation, open MS-RPC ports between the Dell device and the Dell CEE server. See the [Dell CEE Debug Logs](/docs/activitymonitor/config/dellpowerscale/validate.md#Dell-CEE-Debug-Logs) section for information on troubleshooting issues related to Dell CEE.
+After installation, open MS-RPC ports between the Dell device and the Dell CEE server. See the [Dell CEE Debug Logs](/docs/activitymonitor/config/dellpowerscale/validate.md#dell-cee-debug-logs) section for information on troubleshooting issues related to Dell CEE.
 
 ## Configure Dell Registry Key Settings
 

docs/ActivityMonitor/Config/DellUnity/InstallCEE.md

@@ -17,7 +17,7 @@ __Step 2 –__ Follow the instructions in the Dell [Using the Common Event Enabl
 
 ___RECOMMENDED:___ The latest version of .NET Framework and Dell CEE is recommended to use with the asynchronous bulk delivery (VCAPS) feature.
 
-After Dell CEE installation is complete, it is necessary to complete the [Unity Initial Setup with Unisphere](/docs/activitymonitor/config/dellunity/setupunisphere.md#Unity-Initial-Setup-with-Unisphere).
+After Dell CEE installation is complete, it is necessary to complete the [Unity Initial Setup with Unisphere](/docs/activitymonitor/config/dellunity/setupunisphere.md).
 
 ## Configure Dell Registry Key Settings
 

docs/ActivityMonitor/Config/DellUnity/Validate.md

@@ -4,7 +4,7 @@ Once the Activity Monitor agent is configured to monitor the Dell device, the au
 
 ## Validate CEE Registry Key Settings
 
-__NOTE:__ See the [Configure Dell Registry Key Settings](/docs/activitymonitor/config/dellcelerravnx/installcee.md#Configure-Dell-Registry-Key-Settings) topic for information on manually setting the registry key.
+__NOTE:__ See the [Configure Dell Registry Key Settings](/docs/activitymonitor/config/dellcelerravnx/installcee.md#configure-dell-registry-key-settings) topic for information on manually setting the registry key.
 
 After the Activity Monitor activity agent has been configured to monitor the Dell device, it will configure the Dell CEE automatically if it is installed on the same server as the agent. This needs to be set manually in the rare situations where it is necessary for the Dell CEE to be installed on a different server than the Windows proxy server(s) where the Activity Monitor activity agent is deployed.
 

docs/ActivityMonitor/activitymonitor/admin/monitoredhosts/properties/fpolicy.md

@@ -12,7 +12,7 @@ At the bottom are two additional tabs with setting options. On this tab, specify
 
 ![Privileged Access section in the FPolicy Tab](/img/product_docs/activitymonitor/activitymonitor/admin/monitoredhosts/properties/privilegedaccess.png)
 
-The Privileged Access tab is enabled when the Configure FPolicy checkbox is selected at the top. The Privileged Access tab must be configured if automatic configuration of the FPolicy for NetApp Data ONTAP Cluster-Mode devices is used. See the [Configure Privileged Access](/docs/activitymonitor/activitymonitor/admin/monitoredhosts/add/netapp.md#Configure-Privileged-Access) topic for additional information.
+The Privileged Access tab is enabled when the Configure FPolicy checkbox is selected at the top. The Privileged Access tab must be configured if automatic configuration of the FPolicy for NetApp Data ONTAP Cluster-Mode devices is used. See the [Configure Privileged Access](/docs/activitymonitor/activitymonitor/admin/monitoredhosts/add/netapp.md#configure-privileged-access) topic for additional information.
 
 ## Enable and Connect settings Tab
 

docs/ActivityMonitor/activitymonitor/admin/overview.md

@@ -16,6 +16,6 @@ There are up to three tabs at the top left of the window:
 In the Status bar at the bottom of the console is the following information:
 
 - Version – Version number for the Activity Monitor
-- License information – Identifies the organization associated with the license. See the [Install Application](/docs/activitymonitor/activitymonitor/install/application.md#Install-Application) topic for additional information.
-- Trace Level – Creates Trace Logs to provide troubleshooting information. See the [Trace Logs](/docs/activitymonitor/activitymonitor/troubleshooting/tracelogs.md#Trace-Logs) topic for additional information.
+- License information – Identifies the organization associated with the license. See the [Install Application](/docs/activitymonitor/activitymonitor/install/application.md) topic for additional information.
+- Trace Level – Creates Trace Logs to provide troubleshooting information. See the [Trace Logs](/docs/activitymonitor/activitymonitor/troubleshooting/tracelogs.md) topic for additional information.
 - Collect Logs – Collects Trace Logs produced by Trace level

docs/ActivityMonitor/activitymonitor/admin/search/query/activedirectory.md

@@ -14,7 +14,7 @@ The filters are separated into the following categories:
 
 By default, the query is set to return all event activity for the past day. Configuring query filters will scope results returned.
 
-Set the filters as desired and click __Search__. The application searches through the appropriate activity log files and returns the events that match the filters. You can [Filter](/docs/activitymonitor/activitymonitor/admin/search/overview.md#Filter) and [Sort](/docs/activitymonitor/activitymonitor/admin/search/overview.md#Sort) the results using the column headers. Below the Search button is the [Export](/docs/activitymonitor/activitymonitor/admin/search/overview.md#Export) option.
+Set the filters as desired and click __Search__. The application searches through the appropriate activity log files and returns the events that match the filters. You can [Filter](/docs/activitymonitor/activitymonitor/admin/search/overview.md#filter) and [Sort](/docs/activitymonitor/activitymonitor/admin/search/overview.md#sort) the results using the column headers. Below the Search button is the [Export](/docs/activitymonitor/activitymonitor/admin/search/overview.md#export) option.
 
 Filter Value Entry