Feature/youtube fixes 2

docs/auditor/10.8/install/firstlaunch.md

@@ -27,7 +27,7 @@ To start using Netwrix Auditor
 
 After logging into Netwrix Auditor, you will see the following window:
 
-![welcome_screen_thumb_0_0](/images/auditor/10.7/install/welcome_screen_thumb_0_0.webp)
+![welcome_screen_thumb_0_0](/images/auditor/10.8/install/welcome_screen_thumb_0_0.webp)
 
 Take a closer look at the Home page. It contains everything you need to enable complete visibility
 in your environment.

docs/auditor/10.8/install/overview.md

@@ -26,7 +26,7 @@ the internet.
 
 Follow these steps to install Netwrix Auditor
 
-**Step 1 –** Download Netwrix Auditor 10.7 from
+**Step 1 –** Download Netwrix Auditor 10.8 from
 [Netwrix website](https://www.netwrix.com/auditor.html).
 
 NOTE: Before installing Netwrix Auditor, make sure that the Windows Firewall service is started. If
@@ -36,7 +36,7 @@ you must be a member of the local Administrators group to run the Netwrix Audito
 **Step 2 –** Unpack the installation package. The following window will be displayed on successful
 operation completion:
 
-![installationscreen](/images/auditor/10.7/install/installationscreen.webp)
+![installationscreen](/images/auditor/10.8/install/installationscreen.webp)
 
 **Step 3 –** Follow the instructions of the setup wizard. When prompted, accept the license
 agreement.
@@ -67,7 +67,7 @@ After a successful installation, Auditor shortcut will be added to the **Start**
 the product will start. See the [First Launch](/docs/auditor/10.8/install/firstlaunch.md) topic for additional information on
 the product navigation.
 
-![welcome_screen](/images/auditor/10.7/install/welcome_screen.webp)
+![welcome_screen](/images/auditor/10.8/install/welcome_screen.webp)
 
 Netwrix looks beyond the traditional on-premises installation and provides Auditor for cloud and
 virtual environments. For example, you can deploy Auditor on a pre-configured Microsoft Azure

docs/auditor/10.8/install/upgrade.md

@@ -9,11 +9,11 @@ sidebar_position: 80
 Netwrix recommends that you upgrade from the older versions of Netwrix Auditor to the latest version
 available to take advantage of the new features.
 
-Seamless upgrade to Netwrix Auditor 10.7 is supported for versions 10.6 and 10.5.
+Seamless upgrade to Netwrix Auditor 10.8 is supported for versions 10.7 and 10.6.
 
 If you use an earlier version of Netwrix Auditor, then you need to upgrade sequentially right to
-version 10.7. See the following Netwrix knowledge base article for more information:
-[Upgrade Increments for Netwrix Auditor](https://helpcenter.netwrix.com/bundle/z-kb-articles-salesforce/page/kA00g000000H9eJCAS.html).
+version 10.8. See the following Netwrix knowledge base article for more information:
+[Upgrade Increments for Netwrix Auditor](/docs/kb/auditor/upgrade-increments-for-netwrix-auditor).
 
 ## Before Starting the Upgrade
 
@@ -108,7 +108,7 @@ operation. The issues listed below apply to upgrade from 9.96 and 10.
 
 ## Upgrade Procedure
 
-You can upgrade Netwrix Auditor to 10.7 by running the installation package.
+You can upgrade Netwrix Auditor to 10.8 by running the installation package.
 
 Customers who are logged in to the Netwrix Customer Portal can download the latest version of their
 software products from the My Products page:

docs/auditor/10.8/install/virtualappliance/configure.md

@@ -31,7 +31,7 @@ the license agreement and then press `Y` to accept it.
 
 In the example below, review how the shell script configures the new VM:
 
-![appliance_script](/images/auditor/10.7/install/virtualappliance/appliance_script.webp)
+![appliance_script](/images/auditor/10.8/install/virtualappliance/appliance_script.webp)
 
 **Step 6 –** When the script execution completes, you will be prompted to reboot the virtual machine
 for the changes to take effect.

docs/customer/training/learn-about/1secure.md

@@ -6,19 +6,19 @@ keywords: [training, course, 1secure]
 description: "Learn about Netwrix 1Secure through introductory courses"
 ---
 
-import { N1SValue, N1SConcepts, N1SIntroGS, N1SIntroReport } from '@site/src/training/1secure';
+import { N1SValue, N1SConcepts, N1SIntroGS, N1SIntroReport, N1SIntroAlertRisk } from '@site/src/training/1secure';
 import { N1S } from '@site/src/training/products';
 
 
-Estimated length: 1 hour
+Estimated length: 1.5 hours
 
 In this learning path, you will be introduced to <N1S />. It contains the following course:
 
 * 1600 <N1S /> – Valuable Features
 * 2600 <N1S /> – Components & Architecture
 * 3600.1 Introduction to <N1S /> – Getting Started
 * 3600.5 Introduction to <N1S /> – Reports
-
+* 3600.6 Introduction to <N1S /> – Alerts & Risk Assessment
 
 <N1SValue />
 
@@ -27,3 +27,5 @@ In this learning path, you will be introduced to <N1S />. It contains the follow
 <N1SIntroGS />
 
 <N1SIntroReport />
+
+<N1SIntroAlertRisk />

docs/customer/training/learn-about/index.md

@@ -22,7 +22,6 @@ You can choose to self-enroll in "Learn About" learning paths available within t
 * [Learn About Netwrix Endpoint Protector Learning Path](./endpoint-protector.md)
 * [Learn About Netwrix Identity Manager Learning Path](./identity-manager.md)
 * [Learn About Netwrix Password Policy Enforcer Learning Path](./password-policy-enforcer.md)
-* [Learn About Netwrix Password Reset Learning Path](./password-secure.md)
 * [Learn About Netwrix Password Secure Learning Path](./password-secure.md)
 * [Learn About Netwrix Platform Governance for NetSuite Learning Path](./platform-governance-for-netsuite.md)
 * [Learn About Netwrix Platform Governance for Salesforce Learning Path](./platform-governance-for-salesforce.md)

docs/customer/training/learn-about/password-policy-enforcer.md

@@ -10,7 +10,7 @@ import { NPPEValue } from '@site/src/training/password-policy-enforcer';
 import { NPPE } from '@site/src/training/products';
 
 
-Estimated length: 5 minutes
+Estimated length: 2 minutes
 
 In this learning path, you will be introduced to <NPPE />. It contains the following courses:
 

docs/customer/training/learn-about/platform-governance-for-salesforce.md

@@ -10,7 +10,7 @@ import { NPGSValue } from '@site/src/training/platform-governance-for-salesforce
 import { NPGS } from '@site/src/training/products';
 
 
-Estimated length: 5 minutes
+Estimated length: 2 minutes
 
 In this learning path, you will be introduced to <NPGS />. It contains the following courses:
 

docs/customer/training/product/1secure.md

@@ -6,11 +6,11 @@ keywords: [training, course, 1secure]
 description: "Learn to use Netwrix 1Secure through courses"
 ---
 
-import { N1SValue, N1SConcepts, N1SIntroGS, N1SIntroMO, N1SIntroConf, N1SIntroData, N1SIntroReport } from '@site/src/training/1secure';
+import { N1SValue, N1SConcepts, N1SIntroGS, N1SIntroMO, N1SIntroConf, N1SIntroData, N1SIntroReport, N1SIntroAlertRisk } from '@site/src/training/1secure';
 import { N1S } from '@site/src/training/products';
 
 
-Estimated length: 2 hours with optional course
+Estimated length: 2.5 hours with optional course
 
 In this learning path, you will learn how to use <N1S />. It contains the following course:
 
@@ -21,6 +21,7 @@ In this learning path, you will learn how to use <N1S />. It contains the follow
 * 3600.3 Introduction to <N1S /> – Configuration
 * 3600.4 Introduction to <N1S /> – Data Sources
 * 3600.5 Introduction to <N1S /> – Reports
+* 3600.6 Introduction to <N1S /> – Alerts & Risk Assessment
 
 <N1SValue />
 
@@ -35,3 +36,5 @@ In this learning path, you will learn how to use <N1S />. It contains the follow
 <N1SIntroData />
 
 <N1SIntroReport />
+
+<N1SIntroAlertRisk />

docs/customer/training/product/password-reset.md

@@ -10,7 +10,7 @@ import { NPRValue } from '@site/src/training/password-reset';
 import { NPR } from '@site/src/training/products';
 
 
-Estimated length: 5 minutes
+Estimated length: 2 minutes
 
 In this learning path, you will learn how to use <NPR />. It contains the following courses:
 

docs/directorymanager/11.1/admincenter/datasource/manage.md

@@ -28,6 +28,10 @@ string in their names are displayed.
 You can update the details provided for a data source, such as its display name, the service account
 credentials to connect to it, and any other info you provided while creating it.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when updating a data source, you must re-enter the **Service Account Password** even if you are not changing it. This is a required security measure to ensure password field sanitization across the product.
+:::
+
 Follow the steps to update the details for a data source.
 
 Step 1 – In Admin Center, click **Data Sources** in the left pane.

docs/directorymanager/11.1/admincenter/schedule/grouplifecycle.md

@@ -34,7 +34,7 @@ Step 2 – On the Identity Stores page, click the ellipsis button for an identit
 
 Step 3 – Click **Schedules** under Settings in the left pane.
 
-Step 4 – On the Schedules page, click **Add Schedule** and select **Group Life Cycle Job**.  
+Step 4 – On the Schedules page, click **Add Schedule** and select **Group Life Cycle Job**.
 The Create Schedule page is displayed.
 
 Step 5 – In the Schedule Name box, enter a name for the schedule.
@@ -90,6 +90,10 @@ the schedule in the identity store. Follow step 12 in the
 [Create a Group Usage Service Schedule](groupusageservice.md#create-a-group-usage-service-schedule)
 topic for additional information.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing a schedule, you must re-enter the account password in the Authentication section, even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product.
+:::
+
 Step 12 – To set notifications for the schedule, click **Notifications**.
 
 1. On the Notifications dialog box, select the **Send group life extension notification** check box
@@ -102,7 +106,7 @@ Step 12 – To set notifications for the schedule, click **Notifications**.
 
 Step 13 – On the Create Schedule page, click **Create Schedule**.
 
-Step 14 – On the Schedules page, click **Save**.  
+Step 14 – On the Schedules page, click **Save**.
 The schedule is displayed under Group Life Cycle. See the
 [View the Schedules in an Identity Store ](manage.md#view-the-schedules-in-an-identity-store) topic
 for additional information.

docs/directorymanager/11.1/admincenter/schedule/groupusageservice.md

@@ -30,7 +30,7 @@ Step 2 – On the Identity Stores page, click the ellipsis button for an identit
 
 Step 3 – Click **Schedules** under Settings in the left pane.
 
-Step 4 – On the Schedules page, click **Add Schedule** and select **Group Usage Service Job**.  
+Step 4 – On the Schedules page, click **Add Schedule** and select **Group Usage Service Job**.
 The Create Schedule page is displayed.
 
 Step 5 – In the **Schedule Name** box, enter a name for the schedule.
@@ -66,13 +66,13 @@ Step 9 – You can specify containers as targets for the schedule. The schedule
 groups in those containers and sub-containers.
 
 - Select the **Include all containers** check box to run the schedule on all the containers in the
-  identity store.  
+  identity store.
   Or
 - Click **Add Container** to add one or more containers as targets. The Add Container(s) dialog box
   shows the domain name and the OUs in the identity store. Select the check boxes for the required
   containers and click **Add**; the selected containers are displayed in the Target(s) area. To
   exclude a sub-container, clear the check box for it on the Add Container(s) dialog box.
-- To remove a container in the Target(s) area, click **Remove** for it.  
+- To remove a container in the Target(s) area, click **Remove** for it.
   To remove all target objects, click **Remove All**.
 
 Step 10 – You can also specify one or more messaging servers. The job reads expansion logs from
@@ -98,13 +98,13 @@ Step 12 – After specifying the settings for triggers, click **Add**. The trigg
 Triggers area.
 
 A schedule can have one or more triggers, allowing the schedule to be started in many ways. With
-multiple triggers, the schedule will start when any of the triggers occur.  
+multiple triggers, the schedule will start when any of the triggers occur.
 To enable or disable a trigger - Click **Edit** for a trigger in the Triggers area and use the
-toggle button at the top of the Update Trigger dialog box to enable or disable the trigger.  
+toggle button at the top of the Update Trigger dialog box to enable or disable the trigger.
 To remove a trigger - Click **Remove** for a trigger to remove it.
 
 Step 13 – Click **Add Authentication** in the Authentication area to specify an account for running
-the schedule in the identity store.  
+the schedule in the identity store.
 The Authentication dialog box displays your accounts in the respective identity store that you have
 used for signing in. Select an account to authenticate with it or click **Login with a different
 user** to provide the credentials of another account to run the schedule in the identity store.
@@ -114,6 +114,9 @@ Make sure this account falls under a high priority security role that has elevat
 in the identity store (for example, Administrator).
 :::
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing a schedule, you must re-enter the account password in the Authentication section, even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product.
+:::
 
 :::note
 If you are creating this schedule in a Microsoft Entra ID identity store, you can only specify
@@ -125,7 +128,7 @@ section of the [Schedules](/docs/directorymanager/11.1/admincenter/schedule/over
 
 Step 14 – On the Create Schedule page, click **Create Schedule**.
 
-Step 15 – On the Schedules page, click **Save**.  
+Step 15 – On the Schedules page, click **Save**.
  The schedule is displayed under Group Usage Service. See the
 [View the Schedules in an Identity Store ](manage.md#view-the-schedules-in-an-identity-store) topic
 for additional information.

docs/directorymanager/11.1/admincenter/schedule/manage.md

@@ -21,7 +21,7 @@ Step 2 – On the Identity Stores page, click the ellipsis button for an identit
 Step 3 – Click **Schedules** under Settings in the left pane.
 
 Step 4 – On the Schedules page, click the plus sign next to a job name to view the schedules defined
-for it.  
+for it.
 The following is displayed for a schedule:
 
 | Label | Description |
@@ -90,7 +90,7 @@ Step 3 – Click **Schedules** under Settings in the left pane.
 
 Step 4 – On the Schedules page, click the plus sign for a job to view the schedules defined for it.
 
-Step 5 – Use the Enable toggle button for a schedule to enable or disable it.  
+Step 5 – Use the Enable toggle button for a schedule to enable or disable it.
 A disabled schedule is not executed in the identity store.
 
 Step 6 – Click **Save**.
@@ -124,6 +124,14 @@ Step 7 – Click **Update Schedule**.
 
 Step 8 – Click **Save** on the Schedules page.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing any schedule settings, you must re-enter the account password in the Authentication section even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product. The password must be re-entered when:
+- Updating triggers
+- Updating targets
+- Updating notification settings
+- Making any other changes to the schedule
+:::
+
 ## Update Targets for a Schedule
 
 Targets in a schedule are the objects processed by that schedule.
@@ -142,7 +150,7 @@ Step 4 – On the Schedules page, click the plus sign for a job to view the sche
 Step 5 – Click the ellipsis button for a schedule and select **Edit**.
 
 Step 6 – On the Edit Schedule page, the Target(s) area displays the target objects for the
-schedule.  
+schedule.
 Target types differ for different schedule types. For example, you can set containers as targets for
 a Group Lifecycle schedule; and jobs and job collections for a Synchronize schedule. Other
 schedules, such as a User Lifecycle schedule, may not require a target, as they execute certain
@@ -172,11 +180,11 @@ Step 4 – On the Schedules page, click the plus sign for a job to view the sche
 Step 5 – Click the ellipsis button for a schedule and select **Edit**.
 
 Step 6 – On the Edit Schedule page, click the **Notifications** button to update notification
-settings for the schedule.  
+settings for the schedule.
 Notification settings differ for different schedule types. For example, a Smart Group Update
 schedule has a different set of notification options from a Group Lifecycle schedule. Other
 schedules, such as the Directory Manager Entitlement and Workflow Acceleration schedules, do not
-have notification settings.  
+have notification settings.
 To manage the notification settings for a schedule, refer to the instructions for the respective
 schedule.
 
@@ -232,7 +240,7 @@ Step 3 – Click **Schedules** under Settings in the left pane.
 
 Step 4 – On the Schedules page, click the plus sign for a job to view the schedules defined for it.
 
-Step 5 – Click the ellipsis button for a schedule and select **Delete**.  
+Step 5 – Click the ellipsis button for a schedule and select **Delete**.
 The Delete option is not available for system-defined schedules.
 
 Step 6 – On the Delete Schedule dialog box, click **Delete**.

docs/directorymanager/11.1/admincenter/schedule/managedbylifecycle.md

@@ -83,9 +83,13 @@ the schedule in the identity store. Follow step 12 in the
 [Create a Group Usage Service Schedule](groupusageservice.md#create-a-group-usage-service-schedule)
 topic for for additional information.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing a schedule, you must re-enter the account password in the Authentication section, even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product.
+:::
+
 Step 12 – On the Create Schedule page, click **Create Schedule**.
 
-Step 13 – On the Schedules page, click **Save**.  
+Step 13 – On the Schedules page, click **Save**.
  The schedule is displayed under Managed By Life Cycle. See the
 [View the Schedules in an Identity Store ](manage.md#view-the-schedules-in-an-identity-store) topic
 for additional information.

docs/directorymanager/11.1/admincenter/schedule/membershiplifecycle.md

@@ -106,9 +106,13 @@ the schedule in the identity store. Follow step 12 in the
 [Create a Group Usage Service Schedule](groupusageservice.md#create-a-group-usage-service-schedule)
 topic for additional information.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing a schedule, you must re-enter the account password in the Authentication section, even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product.
+:::
+
 Step 12 – On the Create Schedule page, click **Create Schedule**.
 
-Step 13 – On the Schedules page, click **Save**.  
+Step 13 – On the Schedules page, click **Save**.
 The schedule is displayed under **Membership Life Cycle**. See the
 [View the Schedules in an Identity Store ](manage.md#view-the-schedules-in-an-identity-store) topic
 for additional information.

docs/directorymanager/11.1/admincenter/schedule/orphangroupupdate.md

@@ -93,9 +93,13 @@ the schedule in the identity store. See step 12 in the
 [Create a Group Usage Service Schedule](groupusageservice.md#create-a-group-usage-service-schedule)
 topic for additional information.
 
+:::important Password Re-insertion Required
+Due to security enhancements, when editing a schedule, you must re-enter the account password in the Authentication section, even if you are not changing the authentication credentials. This is a required security measure to ensure password field sanitization across the product.
+:::
+
 Step 12 – On the Create Schedule page, click **Create Schedule**.
 
-Step 13 – On the Schedules page, click **Save**.  
+Step 13 – On the Schedules page, click **Save**.
 The schedule is displayed under Orphan Group Update. See the
 [View the Schedules in an Identity Store ](manage.md#view-the-schedules-in-an-identity-store) topic
 for additional information.