Garage Door State Always "Closed"

[lepolt]

I recently started playing with homebridge, and after successfully configuring things told Siri to open my garage door. She did, but the plugin always thinks that the door is closed (state===2)

[GaryREM]

Interesting that mine always shows the Current Door State as Open on the MyTouchHome display and Siri says garage doors are open. Messages in terminal show doorstate: undefined. I was able to open and close the door. However, did not see state change.

[AppleTechy]

Try using the eve app... If you have the issue I think you do it that at the moment that it is a problem with the app you are using. Eve actually calls for a state refresh were as some other apps don't one of which is the Insteon+ app. Let me know if when using the eve app if it pulls the right state.

[JerGitHub]

Same issue here - always "Open" even when closed. See #9 . The bummer for me is I had everything working before I updated everything. The Elgato Eve app and the Insteon+ app don't do anything to fix it as far as refreshing either. :(

[GaryREM]

Eve makes no difference. Status always shows open. As I mentioned in previous note, the status on the homebridge application in terminal shows doorstate: undefined so it is the plugin with a problem.

[JerGitHub]

@GaryREM same here.

[AppleTechy]

What model garage door do you have?

[AppleTechy]

@GaryREM and @JerGitHub ^

[GaryREM]

HD920EV. It is a myQ device and, of course, the status is correct in the Chamberlain app.

[lepolt]

I have a newer model LiftMaster (unsure of model number), but the status is correct in the iOS app.

[JerGitHub]

Liftmaster MyQ 8360 with the Liftmaster Internet Gateway 828LM

[jkoehl]

Liftmaster 8557 with 828LM and status is not correct either. In the debug output on homebridge the state actually says "undefined".

Looking at the JSON coming back in the MyLIftmaster.com site I see this on the GetALlDevices endpoint. Not sure if this helps...

State: "2"
StateName: "Closed"
Statesince: 1453473562309
ToggleAttributeName: "desireddoorstate"
ToggleAttributeValue: "1"

[JerGitHub]

Oh and obviously since I have all Liftmaster - I use the Liftmaster iOS app and not the Chamberlain one. Liftmaster iOS app has worked fine from day 1 - no issues with the Liftmaster iOS app as far as status, etc.

[jkoehl]

Yeah me too. The MyLiftMaster site and iOS app all report proper status.

[AppleTechy]

Ok so clearly the issue isn't with the specific unit... Hmm I have an idea but I won't be able to test my theory unit a little bit later.. I will let you know if it is successful or not

[GaryREM]

The logic in the get function looks incorrect. that.deviceState is only set when there is a single door and no DeviceId is specified. There is no attribute scan if you specify a deviceId. I've got 2 openers.