Hub M2-G01 4.3.7_0036.0652. Read-only file system #144
Description
After the power supply failed and I had to restart it frequently, it stopped turning on. The LED is white and flashes different colors when I press the button. Any help would be greatly appreciated.
`uart ok
strap:0x412b8ae2
enable spi-nand
ROM ver:v1.21, sig:866c151, time:2016.11.04-11:26+0800, CPU(400 MHz), DDR2(533 MHz)
Found recognized ID, rdid=0x00efaa21
init IP fail(0xffffffff)
init ddr ok
img sig ok
chksum ok
load img ok
s-boot
sec sig ok
decrypt img
rtl_cryptoEngine_err(): own bit error READ_MEM32(IPSCSR)=0x00001000.
jump 0xa0000000
SPI Nand ID=00efaa21
SPI Nand die chipsize=0x08000000 byte
SPI Nand dienum=1,
SPI Nand blocksize=0x00020000 byte,
SPI Nand pagesize=0x00000800 byte,
SPI Nand oobsize=0x00000040 byte,
[rtkn_scan_bbt, line 1812], RBA=51, this->RBA_PERCENT = 5,block_v2r_num=1024
[rtkn_scan_bbt, line 1822] block_v2r_num 00000400
[rtk_scan_v2r_bbt]:678,RBA=00000033,2=00000400,
[rtk_scan_v2r_bbt]:684,block_v2r_num=000003cd
INFO: Stored BBT in Die 0: block=8 , block_status_p1=0x000000bb
load bbt v2r table:0 page:512
[rtk_scan_v2r_bbt] have created v2r bbt table:0 on block 8, just loads it !!
check v2r bbt table:0 OK
[rtk_nand_scan_bbt, line 393] mem_page_num=1 bbt_page 704
INFO: Stored BBT in Die 0: block=11 , block_status_p1=0x000000bb
load bbt table:0 page:704
[rtk_nand_scan_bbt] have created bbt table:0 on block 11, just loads it !!
check bbt table:0 OK
[dump_BBT] Nand BBT Content
[0] (00000000, 00000270, 00000000, 000003ff)
Realtek Crypto Engine v0.1
=>CPU Wake-up interrupt happen! GISR=09000084
---Realtek RTL8197F boot code at 2020.07.14-20:40+0800 v3.4T-pre2.2 (993MHz)
Info: Load boot_info success!
== RTL8197 Aqara Gateway bootloader ==
boot_info: ver:0
kernel: newest:1, curr:1
rootfs: newest:1, curr:1
kernel[0]: sum:0x7eee, size:2233412, fail:0
[1]: sum:0x8052, size:2233412, fail:0
rootfs[0]: sum:0x2090, size:13086788, fail:0
[1]: sum:0x0fa2, size:13099076, fail:0
root_sum_check: off
watchdog_time: 0
boot_version: 1.0.0_0001
boot_magic: 0000917c
priv mode
Info: loading kernel 1 ... size 2233412
Info: checking kernel 1 ...
Success!
Info: loading rootfs 1 ... Done
Info: checking rootfs 1 ... Info: checking rootfs 1 ...
rootfs check Success
Info: select rootfs 1
cmdline:root=/dev/mtdblock7 console=ttyS0,38400
Info: booting...
Jump to image start=0x80a00000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
start address: 0x804e4f10
[ 0.000000] Linux version 3.10.90 (liangwenli-e0064@compilex64-ipg) (gcc version 4.9.4 20151028 (prerelease) (Realtek MSDK-4.9.4p1 Build 2648) ) #3 Tue Jul 8 20:49:17 CST 2025
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019385 (MIPS 24Kc)
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4088
[ 0.000000] Kernel command line: root=/dev/mtdblock7 console=ttyS0,38400
[ 0.000000] PID hash table entries: 256 (order: -4, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 1, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 0, 16384 bytes)
[ 0.000000] Writing ErrCtl register=000312a6
[ 0.000000] Readback ErrCtl register=000312a6
[ 0.000000] Memory: 57488k/65536k available (5043k kernel code, 8048k reserved, 1243k data, 240k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:192
[ 0.000000] Realtek GPIO IRQ init
[ 0.000000] Calibrating delay loop... 660.68 BogoMIPS (lpj=3303424)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 2048
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] <<<<>>>>
[ 0.120000] Do MDIO_RESET
[ 0.150000] 40MHz
[ 0.510000] PCIE -> Cannot LinkUP
[ 0.520000] INFO: initializing USB devices ...
[ 0.570000] enable port 0 two port enable
[ 0.730000] patch new usb phy para for 40M OSC
[ 1.270000] Realtek GPIO controller driver init
[ 1.280000] INFO: initializing i2c devices ...
[ 1.290000] INFO: registering sheipa spi device
[ 1.310000] bio: create slab at 0
[ 1.320000] SCSI subsystem initialized
[ 1.330000] INFO: sheipa spi driver register
[ 1.340000] INFO: sheipa spi probe
[ 1.350000] usbcore: registered new interface driver usbfs
[ 1.360000] usbcore: registered new interface driver hub
[ 1.370000] usbcore: registered new device driver usb
[ 1.380000] Advanced Linux Sound Architecture Driver Initialized.
[ 1.390000] cfg80211: Calling CRDA to update world regulatory domain
[ 1.400000] Switching to clocksource MIPS
[ 1.410000] NET: Registered protocol family 2
[ 1.420000] TCP established hash table entries: 2048 (order: 0, 16384 bytes)
[ 1.440000] TCP bind hash table entries: 2048 (order: -1, 8192 bytes)
[ 1.460000] TCP: Hash tables configured (established 2048 bind 2048)
[ 1.480000] TCP: reno registered
[ 1.490000] UDP hash table entries: 1024 (order: 0, 16384 bytes)
[ 1.510000] UDP-Lite hash table entries: 1024 (order: 0, 16384 bytes)
[ 1.530000] NET: Registered protocol family 1
[ 1.550000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.570000] exFAT: Version 1.2.9
[ 1.580000] NTFS driver 2.1.30 [Flags: R/O].
[ 1.590000] msgmni has been set to 112
[ 1.610000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.630000] io scheduler noop registered (default)
[ 1.640000] pwm_probe
[ 1.770000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 1.810000] console [ttyS0] enabled, bootconsole disabled7) is a 16550A
[ 1.810000] console [ttyS0] enabled, bootconsole disabled
[ 1.840000] serial8250: ttyS1 at MMIO 0x18147400 (irq = 5) is a 16550A
[ 1.860000] serial8250: ttyS2 at MMIO 0x18147800 (irq = 47) is a 16550A
[ 1.880000] Realtek GPIO Driver for Flash Reload Default
[ 1.900000] id_chain value=efaa219f
[ 1.910000] id_chain value=efaa219f
[ 1.920000] NAND device: Manufacturer ID: 0xef, Chip ID: 0xaa (Unknown W25M01GV 1G SPI NAND), 128MiB, page size: 2048, OOB size: 64
[ 1.950000] [rtkn_scan_bbt, line 1812], RBA=51, this->RBA_PERCENT = 5,block_v2r_num=1024
[ 1.980000] [rtkn_scan_bbt, line 1822] block_v2r_num 400
[rtk_scan_v2r_bbt]:678,RBA=33,2=400,
[ 2.000000] [rtk_scan_v2r_bbt]:684,block_v2r_num=3cd
[ 2.020000] INFO: Stored BBT in Die 0: block=8 , block_status_p1=0xbb
[ 2.040000] load bbt v2r table:0 page:512
[rtk_scan_v2r_bbt] have created v2r bbt table:0 on block 8, just loads it !!
check v2r bbt table:0 OK
[rtk_nand_scan_bbt, line 393] mem_page_num=1 bbt_page 704
[ 2.110000] INFO: Stored BBT in Die 0: block=11 , block_status_p1=0xbb
[ 2.130000] load bbt table:0 page:704
[rtk_nand_scan_bbt] have created bbt table:0 on block 11, just loads it !!
check bbt table:0 OK
[dump_BBT] Nand BBT Content
[ 2.170000] [0] (0, 270, 0, 3ff)
[ 2.180000] 9 rtkxxpart partitions found on MTD device rtk_nand
[ 2.200000] Creating 9 MTD partitions on "rtk_nand":
[ 2.220000] 0x000000000000-0x0000000a0000 : "bootloader"
[ 2.230000] 0x0000000a0000-0x0000000e0000 : "boot_info"
[ 2.250000] 0x0000000e0000-0x000000120000 : "factory"
[ 2.270000] 0x000000120000-0x000000200000 : "bbt"
[ 2.280000] 0x000000200000-0x000000500000 : "linux_1"
[ 2.300000] 0x000000500000-0x000001500000 : "rootfs_1"
[ 2.320000] 0x000001500000-0x000001800000 : "linux_2"
[ 2.330000] 0x000001800000-0x000002800000 : "rootfs_2"
[ 2.350000] 0x000002800000-0x000007320000 : "data"
[ 2.360000] Realtek WLAN driver - version 1.7 (2015-10-30)(SVN:Unversioned directory)
[ 2.390000] Adaptivity function - version 9.3.4
[ 2.400000] Device Name = RTKWiFi0
[ 2.410000] VIF_NUM=9
[ 2.420000] MACHAL_version_init
[ 2.430000] RFE TYPE =0
[ 2.440000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.460000] rtl819x-ehci rtl819x-ehci: Realtek rtl819x On-Chip EHCI Host Controller
[ 2.480000] rtl819x-ehci rtl819x-ehci: new USB bus registered, assigned bus number 1
[ 2.540000] rtl819x-ehci rtl819x-ehci: irq 21, io mem 0x18021000
[ 2.570000] rtl819x-ehci rtl819x-ehci: USB 2.0 started, EHCI 1.00
[ 2.580000] hub 1-0:1.0: USB hub found
[ 2.600000] hub 1-0:1.0: 2 ports detected
[ 2.610000] usbcore: registered new interface driver usb-storage
[ 2.630000] lumi_btn_probe reset btn=7
[ 2.640000] input: lumi_key as /devices/virtual/input/input0
[ 2.660000] i2c /dev entries driver
[ 2.670000] usbcore: registered new interface driver usbhid
[ 2.690000] usbhid: USB HID core driver
[ 2.700000] soc-audio soc-audio: ASoC: machine rtl819xd_rt5680 should use snd_soc_register_card()
[ 2.730000] soc-audio soc-audio: snd-soc-dummy-dai <-> rtl819x-iis mapping ok
[ 2.750000] TCP: cubic registered
[ 2.760000] NET: Registered protocol family 10
[ 2.780000] sit: IPv6 over IPv4 tunneling driver
[ 2.790000] NET: Registered protocol family 17
[ 2.800000] Key type dns_resolver registered
[ 2.820000]
[ 2.820000] Probing RTL819X NIC-kenel stack size order[0]...
[ 3.510000] eth0 added. vid=9 Member port 0x110...
[ 3.530000] eth1 added. vid=8 Member port 0x0...
[ 3.550000] ALSA device list:
[ 3.560000] #0: rtl819xd_rt5680
[ 3.580000] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[ 3.600000] Freeing unused kernel memory: 240K (80624000 - 80660000)
init started: BusyBox v1.22.1 (2025-06-24 12:18:47 CST)
Try attaching UBI(0,0) on MTD8 and mounting in [/data].
[ 4.570000] UBI: attaching mtd8 to ubi0
[ 6.450000] UBI: scanning is finished
[ 6.500000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 6.530000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi0
[ 6.550000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 6.570000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 6.590000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 6.610000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 6.630000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 6.650000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 6.680000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 6.710000] UBI: background thread "ubi_bgt0d" started, PID 883
UBI device number 0, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 6.970000] UBIFS: parse sync
[ 7.070000] UBIFS: background thread "ubifs_bgt0_0" started, PID 891
[ 7.180000] UBIFS: recovery needed
[ 7.830000] UBIFS error (pid 888): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 7.850000] CPU: 0 PID: 888 Comm: mount Not tainted 3.10.90 #3
[ 7.870000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83861480
805d4a47 8055c508 00000378 837b01b0 80668604 83861480 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 837e7bec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837e7b78
...
[ 7.980000] Call Trace:
[ 7.980000] [<80007e04>] show_stack+0x64/0x7c
[ 8.000000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 8.010000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 8.030000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 8.040000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 8.060000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 8.070000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 8.090000] [<80099e04>] mount_fs+0x20/0xec
[ 8.100000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 8.120000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 8.130000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 8.140000] [<8000b4b0>] stack_done+0x20/0x44
[ 8.150000]
[ 8.160000] UBIFS error (pid 888): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 8.180000] CPU: 0 PID: 888 Comm: mount Not tainted 3.10.90 #3
[ 8.200000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83861480
805d4a47 8055c508 00000378 837b01b0 80668604 83861480 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 837e7c44 8055dc50 837e7c4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837e7bd8
...
[ 8.310000] Call Trace:
[ 8.310000] [<80007e04>] show_stack+0x64/0x7c
[ 8.330000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 8.340000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 8.360000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 8.380000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 8.390000] [<80099e04>] mount_fs+0x20/0xec
[ 8.400000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 8.420000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 8.430000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 8.440000] [<8000b4b0>] stack_done+0x20/0x44
[ 8.460000]
[ 8.460000] UBIFS: background thread "ubifs_bgt0_0" stops
mount: mounting ubi0_0 on /data failed: Invalid argument
Mount UBIFS failed!
[ 8.510000] UBI: detaching mtd8 from ubi0
[ 8.530000] UBI: mtd8 is detached from ubi0
Try attaching UB[ 8.550000] UBI: attaching mtd8 to ubi1
I(1,0) on MTD8 and mounting in [/data].
[ 10.320000] UBI: scanning is finished
[ 10.360000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 10.400000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi1
[ 10.420000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 10.440000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 10.460000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 10.480000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 10.490000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 10.520000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 10.540000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 10.570000] UBI: background thread "ubi_bgt1d" started, PID 905
UBI device number 1, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 10.820000] UBIFS: parse sync
[ 10.930000] UBIFS: background thread "ubifs_bgt1_0" started, PID 913
[ 11.040000] UBIFS: recovery needed
[ 11.690000] UBIFS error (pid 910): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 11.710000] CPU: 0 PID: 910 Comm: mount Not tainted 3.10.90 #3
[ 11.730000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83861280
805d4a47 8055c508 0000038e 837b01b0 80668604 83861280 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 837efbec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837efb78
...
[ 11.840000] Call Trace:
[ 11.840000] [<80007e04>] show_stack+0x64/0x7c
[ 11.860000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 11.870000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 11.890000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 11.900000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 11.920000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 11.930000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 11.950000] [<80099e04>] mount_fs+0x20/0xec
[ 11.960000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 11.980000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 11.990000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 12.000000] [<8000b4b0>] stack_done+0x20/0x44
[ 12.010000]
[ 12.020000] UBIFS error (pid 910): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 12.040000] CPU: 0 PID: 910 Comm: mount Not tainted 3.10.90 #3
[ 12.060000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83861280
805d4a47 8055c508 0000038e 837b01b0 80668604 83861280 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 837efc44 8055dc50 837efc4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837efbd8
...
[ 12.170000] Call Trace:
[ 12.170000] [<80007e04>] show_stack+0x64/0x7c
[ 12.190000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 12.200000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 12.220000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 12.240000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 12.250000] [<80099e04>] mount_fs+0x20/0xec
[ 12.260000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 12.280000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 12.290000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 12.300000] [<8000b4b0>] stack_done+0x20/0x44
[ 12.320000]
[ 12.320000] UBIFS: background thread "ubifs_bgt1_0" stops
mount: mounting ubi1_0 on /data [ 12.350000] UBI: detaching mtd8 from ubi1
failed: Invalid argument
Mount [ 12.380000] UBI: mtd8 is detached from ubi1
UBIFS failed!
Try attaching UB[ 12.400000] UBI: attaching mtd8 to ubi2
I(2,0) on MTD8 and mounting in [/data].
[ 14.170000] UBI: scanning is finished
[ 14.210000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 14.260000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi2
[ 14.280000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 14.300000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 14.320000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 14.340000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 14.360000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 14.380000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 14.410000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 14.440000] UBI: background thread "ubi_bgt2d" started, PID 930
UBI device number 2, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 14.670000] UBIFS: parse sync
[ 14.780000] UBIFS: background thread "ubifs_bgt2_0" started, PID 935
[ 14.890000] UBIFS: recovery needed
[ 15.540000] UBIFS error (pid 932): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 15.560000] CPU: 0 PID: 932 Comm: mount Not tainted 3.10.90 #3
[ 15.580000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83862180
805d4a47 8055c508 000003a4 837b0a20 80668604 83862180 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 837c3bec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837c3b78
...
[ 15.690000] Call Trace:
[ 15.690000] [<80007e04>] show_stack+0x64/0x7c
[ 15.710000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 15.720000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 15.740000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 15.750000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 15.770000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 15.780000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 15.800000] [<80099e04>] mount_fs+0x20/0xec
[ 15.810000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 15.820000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 15.840000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 15.850000] [<8000b4b0>] stack_done+0x20/0x44
[ 15.860000]
[ 15.870000] UBIFS error (pid 932): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 15.890000] CPU: 0 PID: 932 Comm: mount Not tainted 3.10.90 #3
[ 15.910000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83862180
805d4a47 8055c508 000003a4 837b0a20 80668604 83862180 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 837c3c44 8055dc50 837c3c4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 837c3bd8
...
[ 16.020000] Call Trace:
[ 16.020000] [<80007e04>] show_stack+0x64/0x7c
[ 16.040000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 16.050000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 16.070000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 16.080000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 16.100000] [<80099e04>] mount_fs+0x20/0xec
[ 16.110000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 16.130000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 16.140000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 16.150000] [<8000b4b0>] stack_done+0x20/0x44
[ 16.160000]
[ 16.170000] UBIFS: background thread "ubifs_bgt2_0" stops
mount: mounting ubi2_0 on /data [ 16.200000] UBI: detaching mtd8 from ubi2
failed: Invalid argument
Mount [ 16.230000] UBI: mtd8 is detached from ubi2
UBIFS failed!
Try attaching UB[ 16.250000] UBI: attaching mtd8 to ubi3
I(3,0) on MTD8 and mounting in [/data].
[ 18.020000] UBI: scanning is finished
[ 18.060000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 18.110000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi3
[ 18.130000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 18.150000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 18.170000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 18.190000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 18.210000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 18.230000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 18.250000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 18.290000] UBI: background thread "ubi_bgt3d" started, PID 951
UBI device number 3, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 18.520000] UBIFS: parse sync
[ 18.630000] UBIFS: background thread "ubifs_bgt3_0" started, PID 957
[ 18.740000] UBIFS: recovery needed
[ 19.390000] UBIFS error (pid 954): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 19.410000] CPU: 0 PID: 954 Comm: mount Not tainted 3.10.90 #3
[ 19.430000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83862e00
805d4a47 8055c508 000003ba 837b0a20 80668604 83862e00 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 836fbbec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 836fbb78
...
[ 19.540000] Call Trace:
[ 19.540000] [<80007e04>] show_stack+0x64/0x7c
[ 19.560000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 19.570000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 19.590000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 19.600000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 19.620000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 19.630000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 19.650000] [<80099e04>] mount_fs+0x20/0xec
[ 19.660000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 19.670000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 19.690000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 19.700000] [<8000b4b0>] stack_done+0x20/0x44
[ 19.710000]
[ 19.720000] UBIFS error (pid 954): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 19.740000] CPU: 0 PID: 954 Comm: mount Not tainted 3.10.90 #3
[ 19.760000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83862e00
805d4a47 8055c508 000003ba 837b0a20 80668604 83862e00 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 836fbc44 8055dc50 836fbc4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 836fbbd8
...
[ 19.870000] Call Trace:
[ 19.870000] [<80007e04>] show_stack+0x64/0x7c
[ 19.890000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 19.900000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 19.920000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 19.930000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 19.950000] [<80099e04>] mount_fs+0x20/0xec
[ 19.960000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 19.980000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 19.990000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 20.000000] [<8000b4b0>] stack_done+0x20/0x44
[ 20.010000]
[ 20.020000] UBIFS: background thread "ubifs_bgt3_0" stops
mount: mounting ubi3_0 on /data [ 20.050000] UBI: detaching mtd8 from ubi3
failed: Invalid argument
Mount [ 20.080000] UBI: mtd8 is detached from ubi3
UBIFS failed!
Try attaching UB[ 20.100000] UBI: attaching mtd8 to ubi4
I(4,0) on MTD8 and mounting in [/data].
[ 21.870000] UBI: scanning is finished
[ 21.910000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 21.940000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi4
[ 21.960000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 21.980000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 22.000000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 22.020000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 22.040000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 22.060000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 22.090000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 22.120000] UBI: background thread "ubi_bgt4d" started, PID 971
UBI device number 4, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 22.370000] UBIFS: parse sync
[ 22.480000] UBIFS: background thread "ubifs_bgt4_0" started, PID 979
[ 22.590000] UBIFS: recovery needed
[ 23.240000] UBIFS error (pid 976): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 23.260000] CPU: 0 PID: 976 Comm: mount Not tainted 3.10.90 #3
[ 23.280000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 833c6700
805d4a47 8055c508 000003d0 837b16c8 80668604 833c6700 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 838dfbec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 838dfb78
...
[ 23.390000] Call Trace:
[ 23.390000] [<80007e04>] show_stack+0x64/0x7c
[ 23.410000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 23.420000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 23.430000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 23.450000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 23.470000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 23.480000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 23.500000] [<80099e04>] mount_fs+0x20/0xec
[ 23.510000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 23.520000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 23.540000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 23.550000] [<8000b4b0>] stack_done+0x20/0x44
[ 23.560000]
[ 23.570000] UBIFS error (pid 976): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 23.590000] CPU: 0 PID: 976 Comm: mount Not tainted 3.10.90 #3
[ 23.610000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 833c6700
805d4a47 8055c508 000003d0 837b16c8 80668604 833c6700 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 838dfc44 8055dc50 838dfc4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 838dfbd8
...
[ 23.720000] Call Trace:
[ 23.720000] [<80007e04>] show_stack+0x64/0x7c
[ 23.740000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 23.750000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 23.770000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 23.780000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 23.800000] [<80099e04>] mount_fs+0x20/0xec
[ 23.810000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 23.830000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 23.840000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 23.850000] [<8000b4b0>] stack_done+0x20/0x44
[ 23.860000]
[ 23.870000] UBIFS: background thread "ubifs_bgt4_0" stops
mount: mounting ubi4_0 on /data [ 23.900000] UBI: detaching mtd8 from ubi4
failed: Invalid argument
Mount [ 23.930000] UBI: mtd8 is detached from ubi4
UBIFS failed!
Try attaching UB[ 23.950000] UBI: attaching mtd8 to ubi5
I(5,0) on MTD8 and mounting in [/data].
[ 25.720000] UBI: scanning is finished
[ 25.760000] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 18, need 20
[ 25.790000] UBI: attached mtd8 (name "data", size 75 MiB) to ubi5
[ 25.810000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 25.830000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 25.850000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 25.870000] UBI: good PEBs: 601, bad PEBs: 0, corrupted PEBs: 0
[ 25.890000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 25.910000] UBI: max/mean erase counter: 168/52, WL threshold: 4096, image sequence number: 576593122
[ 25.940000] UBI: available PEBs: 0, total reserved PEBs: 601, PEBs reserved for bad PEB handling: 18
[ 25.970000] UBI: background thread "ubi_bgt5d" started, PID 993
UBI device number 5, total 601 LEBs (76312576 bytes, 72.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[ 26.220000] UBIFS: parse sync
[ 26.330000] UBIFS: background thread "ubifs_bgt5_0" started, PID 1001
[ 26.440000] UBIFS: recovery needed
[ 27.090000] UBIFS error (pid 998): check_lpt_crc: invalid crc in LPT node: crc a925 calc 7124
[ 27.110000] CPU: 0 PID: 998 Comm: mount Not tainted 3.10.90 #3
[ 27.130000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83863f00
805d4a47 8055c508 000003e6 837b16c8 80668604 83863f00 00000000 00000008
00018839 804e69a8 00000000 80020338 00000006 0000013d 8055dc50 838e7bec
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 838e7b78
...
[ 27.240000] Call Trace:
[ 27.240000] [<80007e04>] show_stack+0x64/0x7c
[ 27.260000] [<8014d6bc>] check_lpt_crc+0x9c/0xa4
[ 27.270000] [<8014eee8>] ubifs_unpack_nnode+0xb4/0xe4
[ 27.280000] [<8014f2d0>] ubifs_read_nnode+0x1e0/0x254
[ 27.300000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 27.320000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 27.330000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 27.350000] [<80099e04>] mount_fs+0x20/0xec
[ 27.360000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 27.370000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 27.390000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 27.400000] [<8000b4b0>] stack_done+0x20/0x44
[ 27.410000]
[ 27.420000] UBIFS error (pid 998): ubifs_read_nnode: error -22 reading nnode at 8:100409
[ 27.440000] CPU: 0 PID: 998 Comm: mount Not tainted 3.10.90 #3
[ 27.460000] Stack : 00000000 00000000 00000000 00000000 8066924a 00000032 00000003 83863f00
805d4a47 8055c508 000003e6 837b16c8 80668604 83863f00 ffffffea 00000008
00018839 804e69a8 00000000 80020338 00000006 838e7c44 8055dc50 838e7c4c
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 838e7bd8
...
[ 27.570000] Call Trace:
[ 27.570000] [<80007e04>] show_stack+0x64/0x7c
[ 27.590000] [<8014f308>] ubifs_read_nnode+0x218/0x254
[ 27.600000] [<8014f704>] ubifs_lpt_lookup_dirty+0x1e8/0x394
[ 27.620000] [<80142028>] ubifs_replay_journal+0x88c/0x1544
[ 27.630000] [<80135f9c>] ubifs_mount+0x102c/0x1740
[ 27.650000] [<80099e04>] mount_fs+0x20/0xec
[ 27.660000] [<800b1f1c>] vfs_kern_mount+0x64/0x104
[ 27.680000] [<800b4824>] do_mount+0x1f4/0x9e8
[ 27.690000] [<800b50ac>] SyS_mount+0x94/0xdc
[ 27.700000] [<8000b4b0>] stack_done+0x20/0x44
[ 27.710000]
[ 27.720000] UBIFS: background thread "ubifs_bgt5_0" stops
mount: mounting ubi5_0 on /data [ 27.750000] UBI: detaching mtd8 from ubi5
failed: Invalid argument
Mount [ 27.770000] UBI: mtd8 is detached from ubi5
UBIFS failed!
[ 27.900000] WlanSupportAbility = 0x3
[ 27.910000] [ODM_software_init]
[ 27.910000] [97F] Bonding Type 97FS, PKG1
[ 27.910000] [97F] RFE type 0 PHY paratemters: DEFAULT
[ 27.910000] clock 40MHz
[ 27.910000] load efuse ok
[ 27.910000] rom_progress: 0x200006f
[ 27.910000] rom_progress: 0x400006f
[ 27.990000] [GetHwReg88XX][PHY_REG_PG_8197Fmp_Type0] size
[ 28.000000] [GetHwReg88XX][PHY_REG_PG_8197Fmp_Type0]
[ 28.220000] [GetHwReg88XX][rtl8197Ffw]
[ 28.230000] [GetHwReg88XX][rtl8197Ffw size]
[ 28.680000] [97F] Default BB Swing=30
cp: can't create '/data/musics/shadow': No such file or directory
cp: can't create '/data/musics/passwd': No such file or directory
mkdir: can't create directory '/data/storage': Read-only file system
fw_manager.sh revision: 2
pre-revision: 0
remove /data/lumi_fw
mkdir: can't create directory '/data/utils': Read-only file system
/bin/fw_manager.sh: line 1693: can't create /data/utils/fw_manager.revision: nonexistent directory
hostname: rlxlinux-0000
type: , model:
Jan 1 00:00:33 mDNSResponder: mDNSResponder (Engineering Build) (Jun 24 2025 12:20:28) starting
Jan 1 00:00:33 mDNSResponder: Unable to parse DNS server list. Unicast DNS-SD unavailable
Jan 1 00:00:33 mDNSResponder: mDNSPlatformSourceAddrForDest: connect 1.1.1.1 failed errno 128 (Network is unreachable)
Jan 1 00:00:33 mDNSResponder: WARNING: mdnsd continuing as root because user "nobody" does not exist
factory_test bulid time:12:20:41 Jun 24 2025
get_factory_result=0
gobal_cmd_list size 4804
factory_dir:/data/factory!
mkdir: can't create directory '/data/factory': Read-only file system
ble uart port: 0
zigbee uart port: 1
ir i2c port: 2
homekit i2c port: 2
power measure i2c port: 2
factory udp_init!
connect localhost:1883
factory mqtt_init successfully!
on_connect result=0
killall: app_monitor.sh: no process killed
killall: ha_basis: no process killed
killall: ha_agent: no process killed
killall: ha_master: no process killed
killall: ha_driven: no process killed
killall: zigbee_agent: no process killed
killall: ha_ble: no process killed
killall: miio_client: no process killed
killall: miio_agent: no process killed
killall: miio_client_helper_nomqtt.sh: no process killed
killall: mha_master: no process killed
killall: mha_basis: no process killed
killall: mzigbee_agent: no process killed
killall: mijia_automation: no process killed
killall: homekitserver: no process killed
mzigbee_agent has been killed
mha_basis has been killed
mijia_automation has been killed
miio_client has been killed
miio_agent has been killed
miio_client_helper_nomqtt.sh has been killed
mha_master has been killed
homekitserver has been killed
sh: write error: Device or resource busy
sh: write error: Device or resource busy
sh: write error: Device or resource busy
killall: zigbee_agent: no process killed
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2327","value":"1"}]}
to_response, 0
{"wifi_mac":"","set_zigbee_channel":"ok"}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2157","value":"12644"}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2012","value":"0"}]}
to_response, 0
{"wifi_mac":"","set_zigbee_channel":"ok"}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2157","value":"12644"}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2012","value":"0"}]}
Input cmd:cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2021","value":""}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2327","value":"1"}]}
zigbee mac:54ef4410000c85bf
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2108","value":"1"}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2021","value":""}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2021","value":""}]}
to_response, 0
{"wifi_mac":"00E04C818686","set_zigbee_channel":"ok"}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2157","value":"12644"}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2193","value":""}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2356","value":"0"}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2194","value":""}]}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2195","value":""}]}
to_response, 0
{"wifi_mac":"00E04C818686","set_zigbee_channel":"ok"}
cat: can't open '/data/factory/zigbee_device_lumi.0': No such file or directory
to_response, 0
{"wifi_mac":"00E04C818686","cmd":"device_report","did":"lumi.0","model":"unknow","params":[{"res_name":"8.0.2157","value":"12644"}]}
`