Switch is not available

[maodun96]

I have five S1E devices. Two of them have been successfully connected to MQTT and are functioning normally. However, two of the relay switches are showing an "unavailable" status, as shown in the picture. Additionally, one of the devices failed to be added properly.

Previously, all five switches had been connected to MQTT, and at that time, all the relay switches were displaying an "unavailable" status. Interestingly, two of the switches later unexpectedly returned to a normal state under unknown circumstances.

[niceboygithub]

What are the versions of S1E and S1E2HA?

[maodun96]

What are the versions of S1E and S1E2HA?

Both S1E and S1E2HA are updated to the latest according to the project. These are all recent operations.
If you're referring to versions with multiple iterations of hardware, I'm not sure. I bought it in August 2023.

[maodun96]

hello ,@niceboygithub

Through the 'top' command in telnet, I have found that the two processes:
ha_driven -O1 -L7
ha_driven -O 1 -L 7 -p /tmp/automatic.pid

are consistently consuming a total of 20% of the memory when using the problematic switches. The switches that are working normally do not exhibit similar memory usage.

[maodun96]

I recall that I used the ”gw_global_tool.ttl“ to remove the password and flash the firmware. I did not go through the interrupt uboot process. Will this have any impact?

[maodun96]

hi, @niceboygithub

This is the state after running the top command.

Mem: 41512K used, 15348K free, 0K shrd, 857416K buff, 857464K cached
CPU: 0.0% usr 4.5% sys 0.0% nic 95.4% idle 0.0% io 0.0% irq 0.0% sirq
Load average: 6.04 6.06 6.00 1/110 3042
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
814 1 root S 13740 24.1 1 4.5 /bin/aqgui -F /res -l d
802 1 root S 11396 20.0 0 0.0 ha_master -H -S -a /lib/libha_auto.so
799 1 root S 5680 9.9 0 0.0 ha_lanbox
3202 1 root S 5452 9.5 1 0.0 wpa_supplicant -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf -B -W
956 846 root S 4800 8.4 1 0.0 ha_driven -O 1 -L 7 -p /tmp/automatic.pid
798 1 root S 4184 7.3 0 0.0 ha_basis
796 1 root S 3852 6.7 1 0.0 ha_agent -D
756 1 root S 3088 5.4 1 0.0 /bin/sysservice -l d
958 846 root S 2576 4.5 1 0.0 {res_monitor.sh} /bin/sh /data/bin/res_monitor.sh
846 1 root S 2576 4.5 1 0.0 {res_monitor.sh} /bin/sh /data/bin/res_monitor.sh
758 1 root S 2568 4.5 1 0.0 telnetd
1 0 root S 2452 4.3 1 0.0 {linuxrc} init
2961 1 root S 2452 4.3 1 0.0 -/bin/login
3148 846 root S 2448 4.3 0 0.0 {app_monitor.sh} /bin/sh /tmp/app_monitor.sh
815 1 root S 2448 4.3 0 0.0 {gui_monitor.sh} /bin/sh /bin/gui_monitor.sh
805 1 root S 2448 4.3 1 0.0 {Aries.sh} /bin/sh /bin/Aries.sh
1199 845 root S 2448 4.3 1 0.0 {ubus_monitor.sh} /bin/sh /data/bin/ubus_monitor.sh
1146 844 root S 2448 4.3 0 0.0 {mqtt_sub.sh} /bin/sh /data/bin/mqtt_sub.sh
957 846 root S 2448 4.3 1 0.0 awk /method|sendHeartbeat {print $7 $8}
1197 845 root S 2448 4.3 1 0.0 awk {$1=$2=$3=$4=" ; print $0}
844 1 root S 2448 4.3 0 0.0 {mqtt_sub.sh} /bin/sh /data/bin/mqtt_sub.sh
845 1 root S 2448 4.3 1 0.0 {ubus_monitor.sh} /bin/sh /data/bin/ubus_monitor.sh
3042 3024 root R 2448 4.3 1 0.0 top
3024 758 root S 2448 4.3 1 0.0 -sh
3243 1 root S 2448 4.3 1 0.0 udhcpc -i wlan0 -s /etc/udhcp/simple.script -x hostname Magic-Switch-S1E-4E00 -t 10
3026 815 root S 2316 4.0 0 0.0 sleep 5
3028 3148 root S 2316 4.0 0 0.0 sleep 5
3041 805 root S 2316 4.0 1 0.0 sleep 10
792 1 root S 2296 4.0 1 0.0 mdnsd
739 1 root S 2236 3.9 0 0.0 /bin/fwfs --block_size=131072 --subblock_size=32768 --block_cycles=500 --read_size=2048 --prog_size=2048 --cache_size=32768 --file_cache_size=32768 --cache_pool_size=2 --block_count=8 --lookahead_size=8 /dev/mtd10 /misc
744 1 root S 1784 3.1 1 0.0 ubusd
1196 845 root S 1752 3.0 1 0.0 ubus -v monitor
1145 844 root S 1592 2.8 0 0.0 /bin/mosquitto_sub -h 192.168.10.132 -u mqtt -P 123456 -p 1883 -v -t homeassistant/+/0x0054ef44534e00/# -t homeassistant/status
749 1 root S 1456 2.5 1 0.0 property_service -i /etc/build.prop -p /data/storage/prop.dat -b
740 1 root S 1376 2.4 0 0.0 watchdog_30S
564 2 root SW 0 0.0 1 0.0 [kworker/1:1]
617 2 root SW 0 0.0 1 0.0 [ksdioirqd/mmc0]
255 2 root SW 0 0.0 0 0.0 [kworker/0:1]
1111 2 root DW 0 0.0 0 0.0 [disp0_P0_MAIN]
1114 2 root DW 0 0.0 0 0.0 [MI_FB_SYNC_DISP]
670 2 root SW 0 0.0 0 0.0 [bl_wdog/mmc0:00]
657 2 root DWN 0 0.0 1 0.0 [mi_log]
3014 2 root SW 0 0.0 0 0.0 [kworker/0:0]
7 2 root SW 0 0.0 0 0.0 [rcu_preempt]
1934 2 root SW< 0 0.0 0 0.0 [kworker/u5:1]
22 2 root SW 0 0.0 1 0.0 [kworker/u4:1]
3227 2 root SW< 0 0.0 1 0.0 [kworker/u5:0]
3 2 root SW 0 0.0 0 0.0 [ksoftirqd/0]
16 2 root SW 0 0.0 1 0.0 [migration/1]
2556 2 root SW< 0 0.0 1 0.0 [kworker/u5:2]
17 2 root SW 0 0.0 1 0.0 [ksoftirqd/1]
10 2 root SW 0 0.0 0 0.0 [migration/0]
491 2 root SW 0 0.0 1 0.0 [monitor_temp]
354 2 root SW 0 0.0 0 0.0 [kswapd0]
214 2 root SW 0 0.0 1 0.0 [kcompactd0]
731 2 root SW 0 0.0 1 0.0 [ubi_bgt1d]
1959 2 root SW 0 0.0 1 0.0 [kworker/u4:2]
12 2 root SW 0 0.0 0 0.0 [watchdog/0]
20 2 root SW 0 0.0 1 0.0 [kdevtmpfs]
622 2 root DW 0 0.0 1 0.0 [IspDriverThread]
626 2 root DW 0 0.0 0 0.0 [IspMidThreadWq]
654 2 root SW 0 0.0 0 0.0 [mi_wq]
2 0 root SW 0 0.0 0 0.0 [kthreadd]
5 2 root SW< 0 0.0 0 0.0 [kworker/0:0H]

[s94949494]

My s1e switch doesn't work too
S1E 2.20
S1E2HA 1.0.8

[lglw]

I have exactly the same problem

[oopuuu]

Try this

[oopuuu]

I have exactly the same problem

Try this

[maodun96]

Try this

感谢老哥，我已经用不到了，给其他同学一个参考。（已经开始往外卖了

[s94949494]

試試這個

謝謝，照你的方式已可成功控制開關
其他選項主題或者字體這還是不可用，有方法修改嗎

[startrace111]

試試這個

謝謝，照你的方式已可成功控制開關 其他選項主題或者字體這還是不可用，有方法修改嗎

try my repo, I have fixed this problem: this

[s94949494]

試試這個

謝謝，照你的方式已可成功控制切換其他選項主題或字體這還是不可用，有方法修改嗎

嘗試我的 repo，我已經修復了這個問題：這個

I try , but still have problem

[startrace111]

試試這個

謝謝，照你的方式已可成功控制切換其他選項主題或字體這還是不可用，有方法修改嗎

嘗試我的 repo，我已經修復了這個問題：這個

I try , but still have problem

Not s1e_update.sh, use install_s1e2ha.sh this script

[s94949494]

試試這個

謝謝，照你的方式已可成功控制切換其他選項主題或字體這還是不可用，有方法修改嗎

嘗試我的 repo，我已經修復了這個問題：這個

I try , but still have problem

Not s1e_update.sh, use install_s1e2ha.sh this script

thx bro , it can work.