Stable release v0.6.5.1

Download Installer here

The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:

IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.

Stable version 0.6.5.1 is available using this zip file:

• Download ZIP package

For your safety, we recommend verifying the SHA checksums.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 527.41 OR HIGHER!

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

Changes since the last stable version v0.6.5.0:

• ADDED support for Zephyr Protocol

Stable release v0.6.5.0

Download Installer here

The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:

IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.

Stable version 0.6.5.0 is available using this zip file:

• Download ZIP package

For your safety, we recommend verifying the SHA checksums.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 522.22 OR HIGHER!

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

Changes since the last stable version v0.6.5.0:

• ADDED - Excavator RandomX CPU support
• ADDED - Neoscrypt for AMD and NVIDIA GPUs
• ADDED - kHeavyHash for AMD and NVIDIA GPUs
• UPDATED - Autolykos speed improvement
• UPDATED - Support for AMD 7000 cards
• UPDATED - Minimum Nvidia driver version set to 527.41
• UPDATED - Decreased minimum VRAM required from 5.6GB to 2GB. NHQM will automatically recognize the minimum required VRAM size for each algorithm and GPU combination
• UPDATED - Optimization file version to data_011.json
• UPDATED - If an OCTune profile exists, switching the rig manager to "manual" will load that existing profile.
• UPDATED - When a card is reenabled, it will load either a rig manager profile (if it was set) or an OC tune profile if one has been saved.
• BUGFIX - Fixed an issue in OCTune that prevented setting memory timings.
• BUGFIX - Fixed an issue where OCTune fan profile 3 was not saved correctly.
• BUGFIX - OC tune fan and OC profiles are now saved in commands.json under 'on_quickminer.start'.
• BUGFIX - If a card is disabled (the current OC/fan profile) remains.
• BUGFIX - Fixed an issue with the latest AMD drivers

Prerelease v0.6.3.0 RC

This is an experimental version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

IF YOU USE LHR GPU, MAKE SURE TO USE 522.22 OR HIGHER NVIDIA DRIVERS FOR FULL LHR UNLOCK

Changelog:

v0.6.3.0 RC

• ADDED - Excavator RandomX CPU support
• UPDATED - Autolykos speed improvement
• UPDATED - Support for AMD 7000 cards
• UPDATED - Minimum Nvidia driver version set to 527.41
• UPDATED - Decreased minimum VRAM required from 5.6GB to 2GB. NHQM will automatically recognize the minimum required VRAM size for each algorithm and GPU combination
• BUGFIX - Fixed an issue with the latest AMD drivers

Prerelease v0.6.2.0 RC

This is an untested version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

IF YOU USE LHR GPU, MAKE SURE TO USE 522.22 OR HIGHER NVIDIA DRIVERS FOR FULL LHR UNLOCK

Changelog:

v0.6.2.0 RC

• ADDED - Neoscrypt for AMD and NVIDIA GPUs
• UPDATED - Optimization file version to data_011.json
• UPDATED - If an OCTune profile exists, switching the rig manager to "manual" will load that existing profile.
• UPDATED - When a card is reenabled, it will load either a rig manager profile (if it was set) or an OC tune profile if one has been saved.
• BUGFIX - Fixed an issue in OCTune that prevented setting memory timings.
• BUGFIX - Fixed an issue where OCTune fan profile 3 was not saved correctly.
• BUGFIX - OC tune fan and OC profiles are now saved in commands.json under 'on_quickminer.start'.
• BUGFIX - If a card is disabled (the current OC/fan profile) remains.

NOTICE: More NeoScrypt profiles are coming soon. If you plan to overclock your GPU manually, we recommend lowering the memory clock to as low as possible and lowering the core clock voltage. NeoScrypt is core intensive algorithm.

ATTENTION! Once QuickMiner switches to NeoScrypt, the default profile will be applied.

Stable release v0.6.1.2

Download Installer here

The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:

IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.

Stable version 0.6.1.2 is available using this zip file:

• Download ZIP package

For your safety, we recommend verifying the SHA checksums.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

The latest NVIDIA drivers fully remove the LHR lock.

By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

Changes since the last stable version v0.6.0.1:

• ADDED - Partial unlock for drivers between 512.96 to 522.25
• ADDED - Notice to install 522.25 drivers if LHR GPU
• ADDED - Auto Profit Switching & benchmarking. Read more here.
• UPDATED - Cuda to 11.8 to support Ada and Hopper GPUs
• REFACTOR - AMD overclock via OCTune
• BUGFIX - NHQM logic when restarting Excavator on 0 speed
• BUGFIX - Setting core voltage for NVIDIA via OCTune
• BUGFIX - Various OCTune fixes related to pre-filing and saving the profiles
• BUGFIX - Upgrading from version v0.5.5.0 or older caused mining not to start.
• BUGFIX - Game Mode multi-algo support
• BUGFIX - OCTune bugfix
• BUGFIX - KawPow now works with the latest drivers
• BUGFIX - QM crashed if switchany HTTP request fails

Prerelease v0.6.1.1 RC

This is an untested version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

IF YOU USE LHR GPU, MAKE SURE TO USE 522.22 OR HIGHER NVIDIA DRIVERS FOR FULL LHR UNLOCK

Changelog:

v0.6.1.1 RC

• REFACTOR - AMD overclock via OCTune
• BUGFIX - NHQM logic when restarting Excavator on 0 speed
• BUGFIX - Setting core voltage for NVIDIA via OCTune
• BUGFIX - Various OCTune fixes related to pre-filing and saving the profiles
• BUGFIX - Upgrading from version v0.5.5.0 or older caused mining not to start.
• BUGFIX - Game Mode multi algo support

ATTENTION! Make sure to change the optimization profile once the QuickMiner switches to ETChash automatically! Once QuickMiner switches to ETChash, the default profile will be applied.

Prerelease v0.6.1.0 RC

This is an untested version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

IF YOU USE LHR GPU, MAKE SURE TO USE 522.22 NVIDIA DRIVERS FOR FULL LHR UNLOCK

Changelog:

v0.6.1.0 RC

• Added partial unlock for drivers between 512.96 to 522.25
• Added a notice to install 522.25 drivers if LHR GPU
• Auto Profit Switching & benchmarking. Read more here.
• OCTune bugfix
• Updated Cuda to 11.8 to support Ada and Hopper GPUs

ATTENTION! Make sure to change the optimization profile once the QuickMiner switches to ETChash automatically! Once QuickMiner switches to ETChash, the default profile will be applied.

Stable release v0.6.0.1

Download Installer here

The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:

IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.

Stable version 0.6.0.1 is available using this zip file:

• Download ZIP package,

For your safety, we recommend that you verify the SHA checksums.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

The new LHR unlock algorithm may unstabilize the NVIDIA driver (drivers shall restart automatically).

By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

Changes since the last stable version v0.5.5.0:

• Correct an issue where some newly found shares were either associated with a wrong base_nonce ("job not found") or a wrong job_id ("share above target") when switching to a new job.
• Remove -t parameter, using test/dev network, is now done entirely through the config.
• \quickstart API uses the full URL of the pool as a "loc" parameter instead of "auto."
• Fix an issue where the console (debug mode) closed QM without killing the excavator.
• Support for Autolykos, Kawpow, and Etchash.
• Support for multi-algorithm OC profile.
• Added a warning when users aren't using the NH mining address.
• Update Kawpow algorithm for AMD cards with only 4Gb/6Gb VRAM use split DAG.
• Split DAG with ETCHash.
• Remove old OCTune.
• Autoswitch to ETCHash after ETH POS merge.

Prerelease v0.6.0.1 RC

This is an untested version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

The new LHR unlock algorithm may unstabilize the NVIDIA driver (drivers shall restart automatically).

Changelog:

v0.6.0.1

• Update Kawpow algorithm for AMD cards with only 4Gb/6Gb VRAM use split DAG.
• Split DAG with ETCHash.
• Remove old OCTune.
• Autoswitch to ETCHash after ETH POS merge.

ATTENTION! Make sure to change the optimization profile once the QuickMiner switches to ETChash automatically! Once QuickMiner switches to ETChash, the default profile will be applied.

Prerelease v0.6.0.0 RC

This is an untested version. The latest stable version can be downloaded here.

VERY IMPORTANT!

After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas, and recommendations here.

By downloading this software, you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.

The simplest way to install NiceHash QuickMiner is by using Installer, which also gives you the option to install this prerelease RC version. If you have issues, download ZIP package.

ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 511.09 OR HIGHER!

The new LHR unlock algorithm may unstabilize the NVIDIA driver (drivers shall restart automatically).

Changelog:

v0.6.0.0

• Support for Autolykos, Kawpow, and Etchash.
• Support for multi-algorithm OC profile.
• Added a warning when users aren't using the NH mining address.