Merge remote-tracking branch 'stable/linux-6.12.y' into rpi-6.12.y

Author: popcornmix

Documentation/filesystems/f2fs.rst

@@ -235,9 +235,9 @@ usrjquota=<file>	 Appoint specified file and type during mount, so that quota
 grpjquota=<file>	 information can be properly updated during recovery flow,
 prjjquota=<file>	 <quota file>: must be in root directory;
 jqfmt=<quota type>	 <quota type>: [vfsold,vfsv0,vfsv1].
-offusrjquota		 Turn off user journalled quota.
-offgrpjquota		 Turn off group journalled quota.
-offprjjquota		 Turn off project journalled quota.
+usrjquota=		 Turn off user journalled quota.
+grpjquota=		 Turn off group journalled quota.
+prjjquota=		 Turn off project journalled quota.
 quota			 Enable plain user disk quota accounting.
 noquota			 Disable all plain disk quota option.
 alloc_mode=%s		 Adjust block allocation policy, which supports "reuse"

Documentation/netlink/specs/ethtool.yaml

@@ -1682,16 +1682,16 @@ operations:
 
       do: &module-eeprom-get-op
         request:
-          attributes:
-            - header
-        reply:
           attributes:
             - header
             - offset
             - length
             - page
             - bank
             - i2c-address
+        reply:
+          attributes:
+            - header
             - data
       dump: *module-eeprom-get-op
     -

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 12
-SUBLEVEL = 41
+SUBLEVEL = 42
 EXTRAVERSION =
 NAME = Baby Opossum Posse
 

arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi

@@ -168,7 +168,6 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rx-during-tx;
-	rs485-rts-active-low;
 	uart-has-rtscts;
 	status = "okay";
 };

arch/arm/boot/dts/nxp/vf/vfxxx.dtsi

@@ -604,7 +604,7 @@
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";

arch/arm/boot/dts/ti/omap/am335x-boneblack.dts

@@ -35,7 +35,7 @@
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
 		"[mmc0_cd]",
-		"P8_42A [ecappwm0]",
+		"P9_42A [ecappwm0]",
 		"P8_35 [lcd d12]",
 		"P8_33 [lcd d13]",
 		"P8_31 [lcd d14]",

arch/arm/crypto/aes-neonbs-glue.c

@@ -232,7 +232,7 @@ static int ctr_encrypt(struct skcipher_request *req)
 	while (walk.nbytes > 0) {
 		const u8 *src = walk.src.virt.addr;
 		u8 *dst = walk.dst.virt.addr;
-		int bytes = walk.nbytes;
+		unsigned int bytes = walk.nbytes;
 
 		if (unlikely(bytes < AES_BLOCK_SIZE))
 			src = dst = memcpy(buf + sizeof(buf) - bytes,

arch/arm64/boot/dts/exynos/google/gs101.dtsi

@@ -155,6 +155,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <70>;
 				exit-latency-us = <160>;
 				min-residency-us = <2000>;
@@ -164,6 +165,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <150>;
 				exit-latency-us = <190>;
 				min-residency-us = <2500>;
@@ -173,6 +175,7 @@
 				idle-state-name = "c2";
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
 				entry-latency-us = <235>;
 				exit-latency-us = <220>;
 				min-residency-us = <3500>;

arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi

@@ -286,6 +286,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";

arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi

@@ -297,6 +297,8 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";