Update examples/rtc-demo/Embed.toml

Co-authored-by: Yatekii <[email protected]>

Author: timokroeger

examples/rtc-demo/Embed.toml

@@ -1,63 +1,2 @@
-[default.probe]
-# USB vendor ID
-# usb_vid = "1337"
-# USB product ID
-# usb_pid = "1337"
-# Serial number
-# serial = "12345678"
-# The protocol to be used for communicating with the target.
-protocol = "Swd"
-# The speed in kHz of the data link to the target.
-# speed = 1337
-
-[default.flashing]
-# Whether or not the target should be flashed.
-enabled = true
-# Whether or not the target should be halted after reset.
-# DEPRECATED, moved to reset section
-halt_afterwards = false
-# Whether or not bytes erased but not rewritten with data from the ELF
-# should be restored with their contents before erasing.
-restore_unwritten_bytes = false
-# The path where an SVG of the assembled flash layout should be written to.
-# flash_layout_output_path = "out.svg"
-
-[default.reset]
-# Whether or not the target should be reset.
-# When flashing is enabled as well, the target will be reset after flashing.
-enabled = true
-# Whether or not the target should be halted after reset.
-halt_afterwards = false
-
-[default.general]
-# The chip name of the chip to be debugged.
-chip = "nRF52840_xxAA"
-# A list of chip descriptions to be loaded during runtime.
-chip_descriptions = []
-# The default log level to be used. Possible values are one of:
-#   "OFF", "ERROR", "WARN", "INFO", "DEBUG", "TRACE" 
-log_level = "WARN"
-
 [default.rtt]
-# Whether or not an RTTUI should be opened after flashing.
-# This is exclusive and cannot be used with GDB at the moment.
 enabled = true
-# A list of channel associations to be displayed. If left empty, all channels are displayed.
-channels = [
-    # { up = 0, down = 0, name = "name", format = "String" }
-]
-# The duration in ms for which the logger should retry to attach to RTT.
-timeout = 3000
-# Whether timestamps in the RTTUI are enabled
-show_timestamps = true
-# Whether to save rtt history buffer on exit.
-log_enabled = false
-# Where to save rtt history buffer relative to manifest path.
-log_path = "./logs"
-
-[default.gdb]
-# Whether or not a GDB server should be opened after flashing.
-# This is exclusive and cannot be used with RTT at the moment.
-enabled = false
-# The connection string in host:port format wher the GDB server will open a socket.
-# gdb_connection_string