[nrf fromtree] boards: nordic: Fix RRAM size for nRF54l10 NS

The nRF54L1 has 1012 KB RRAM and not 1022 KB as
it was set before. This adjusts the NS target
with the correct size.

Signed-off-by: Georgios Vasilakis <[email protected]>
(cherry picked from commit 61bb7bf7037faed84065a074d61e2b6ac96cc2b0)

Author: Vge0rge

boards/nordic/nrf54l15dk/nrf54l15dk_nrf54l10_cpuapp_ns.dts

@@ -31,8 +31,8 @@
 / {
 	/*
 	 * Default SRAM planning when building for nRF54L10 with ARM TrustZone-M support.
-	 * - Lowest 96 kB SRAM allocated to Secure image (sram0_s).
-	 * - Upper 96 kB SRAM allocated to Non-Secure image (sram0_ns).
+	 * - Lowest 72 kB SRAM allocated to Secure image (sram0_s).
+	 * - Upper 72 kB SRAM allocated to Non-Secure image (sram0_ns).
 	 *
 	 * nRF54L10 has 192 kB of volatile memory (SRAM) but the last 42kB are reserved for
 	 * the FLPR MCU.
@@ -62,7 +62,7 @@
 		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		/* nRF54L10 has 1022 kB of non volatile memory (RRAM) but the
+		/* nRF54L10 has 1012 kB of non volatile memory (RRAM) but the
 		 * last 62kB are reserved for the FLPR MCU.
 		 *
 		 * This static layout needs to be the same with the upstream TF-M layout in the
@@ -91,12 +91,12 @@
 
 		slot0_ns_partition: partition@6A000 {
 			label = "image-0-nonsecure";
-			reg = <0x0006A000 DT_SIZE_K(504)>;
+			reg = <0x0006A000 DT_SIZE_K(494)>;
 		};
 
-		storage_partition: partition@E8000 {
+		storage_partition: partition@E5800 {
 			label = "storage";
-			reg = <0x000E8000 DT_SIZE_K(32)>;
+			reg = <0x000E5800 DT_SIZE_K(32)>;
 		};
 	};
 };

boards/nordic/nrf54l15dk/nrf54l15dk_nrf54l10_cpuapp_ns.yaml

@@ -9,7 +9,7 @@ toolchain:
   - gnuarmemb
   - zephyr
 ram: 192
-flash: 1022
+flash: 1012
 supported:
   - adc
   - gpio