[nrf fromlist] tests: drivers: spi: nordic: add device PM runtime

adamkondraciuk · adamkondraciuk · commit 4dd989408898 · 2024-10-16T17:17:51.000+02:00
Add configuration for testing SPI with device runtime PM enabled for nRF platforms. Upstream PR: zephyrproject-rtos/zephyr#75715 Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
diff --git a/tests/drivers/spi/spi_controller_peripheral/boards/nrf52840dk_nrf52840.overlay b/tests/drivers/spi/spi_controller_peripheral/boards/nrf52840dk_nrf52840.overlay
@@ -50,6 +50,7 @@
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_common.dtsi b/tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_common.dtsi
@@ -60,6 +60,7 @@
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay b/tests/drivers/spi/spi_controller_peripheral/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay
@@ -55,6 +55,7 @@
 	overrun-character = <0x00>;
 	memory-regions = <&dma_fast_region>;
 	cs-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_controller_peripheral/boards/nrf54l15pdk_nrf54l15_cpuapp.overlay b/tests/drivers/spi/spi_controller_peripheral/boards/nrf54l15pdk_nrf54l15_cpuapp.overlay
@@ -54,6 +54,7 @@
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	dut_spi_dt: test-spi-dev@0 {
 		compatible = "vnd,spi-device";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_controller_peripheral/testcase.yaml b/tests/drivers/spi/spi_controller_peripheral/testcase.yaml
@@ -57,3 +57,9 @@ tests:
       - nrf52840dk/nrf52840
       - nrf54l15pdk/nrf54l15/cpuapp
       - nrf54h20dk/nrf54h20/cpurad
+
+  drivers.spi.pm_runtime:
+    extra_configs:
+      - CONFIG_PM_DEVICE=y
+      - CONFIG_PM_DEVICE_RUNTIME=y
+    filter: CONFIG_SOC_FAMILY_NORDIC_NRF
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf51dk_nrf51822.overlay b/tests/drivers/spi/spi_loopback/boards/nrf51dk_nrf51822.overlay
@@ -7,6 +7,7 @@
 &spi1 {
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf52840dk_nrf52840.overlay b/tests/drivers/spi/spi_loopback/boards/nrf52840dk_nrf52840.overlay
@@ -8,6 +8,7 @@
 	overrun-character = <0x00>;
 	rx-delay = <1>;
 	cs-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf52dk_nrf52832.overlay b/tests/drivers/spi/spi_loopback/boards/nrf52dk_nrf52832.overlay
@@ -7,6 +7,7 @@
 &spi1 {
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf54h20dk_nrf54h20_cpuapp.overlay b/tests/drivers/spi/spi_loopback/boards/nrf54h20dk_nrf54h20_cpuapp.overlay
@@ -30,6 +30,7 @@
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
 	memory-regions = <&cpuapp_dma_region>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay b/tests/drivers/spi/spi_loopback/boards/nrf54h20dk_nrf54h20_cpuapp_fast.overlay
@@ -30,6 +30,7 @@
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
 	memory-regions = <&dma_fast_region>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf54l15pdk_nrf54l15_cpuapp.overlay b/tests/drivers/spi/spi_loopback/boards/nrf54l15pdk_nrf54l15_cpuapp.overlay
@@ -29,6 +29,7 @@
 	pinctrl-1 = <&spi00_sleep>;
 	pinctrl-names = "default", "sleep";
 	overrun-character = <0x00>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/boards/nrf9160dk_nrf9160.overlay b/tests/drivers/spi/spi_loopback/boards/nrf9160dk_nrf9160.overlay
@@ -7,6 +7,7 @@
 &spi3 {
 	overrun-character = <0x00>;
 	cs-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+	zephyr,pm-device-runtime-auto;
 	slow@0 {
 		compatible = "test-spi-loopback-slow";
 		reg = <0>;
diff --git a/tests/drivers/spi/spi_loopback/testcase.yaml b/tests/drivers/spi/spi_loopback/testcase.yaml
@@ -204,3 +204,8 @@ tests:
   drivers.spi.max32_dma.loopback:
     extra_args: OVERLAY_CONFIG="overlay-max32-spi-dma.conf"
     filter: CONFIG_SOC_FAMILY_MAX32
+  drivers.spi.nrf_pm_runtime:
+    extra_configs:
+      - CONFIG_PM_DEVICE=y
+      - CONFIG_PM_DEVICE_RUNTIME=y
+    filter: CONFIG_SOC_FAMILY_NORDIC_NRF
