[nrf fromtree] drivers: mspi: mspi_dw: add API to configure RX_DLY timing

The SSI DW peripheral supports an RX_SAMPLE_DLY register in some
instances- this register controls the number of clock cycles from the
default sample time before the RX input is actually sampled. This can be
used to improve reliability when operating the SSI at a higher clock
speed.

Add an implementation of the mspi_timing_cfg api, and header to define
the identifier so that users can configure this parameter

Signed-off-by: Daniel DeGrasse <[email protected]>
(cherry picked from commit 9c829a1)

Author: danieldegrasse

drivers/mspi/mspi_dw.c

@@ -17,6 +17,7 @@
 #include <zephyr/pm/device_runtime.h>
 #include <zephyr/sys/byteorder.h>
 #include <zephyr/sys/util.h>
+#include <zephyr/drivers/mspi/mspi_dw.h>
 
 #include "mspi_dw.h"
 
@@ -48,6 +49,7 @@ struct mspi_dw_data {
 	uint32_t ctrlr0;
 	uint32_t spi_ctrlr0;
 	uint32_t baudr;
+	uint32_t rx_sample_dly;
 
 #if defined(CONFIG_MSPI_XIP)
 	uint32_t xip_freq;
@@ -113,6 +115,7 @@ DEFINE_MM_REG_WR(imr,		0x2c)
 DEFINE_MM_REG_RD(isr,		0x30)
 DEFINE_MM_REG_RD(risr,		0x34)
 DEFINE_MM_REG_RD_WR(dr,		0x60)
+DEFINE_MM_REG_WR(rx_sample_dly,	0xf0)
 DEFINE_MM_REG_WR(spi_ctrlr0,	0xf4)
 
 #if defined(CONFIG_MSPI_XIP)
@@ -936,6 +939,7 @@ static int start_next_packet(const struct device *dev, k_timeout_t timeout)
 		: 0);
 	write_spi_ctrlr0(dev, dev_data->spi_ctrlr0);
 	write_baudr(dev, dev_data->baudr);
+	write_rx_sample_dly(dev, dev_data->rx_sample_dly);
 	write_ser(dev, BIT(dev_data->dev_id->dev_idx));
 
 	if (xip_enabled) {
@@ -1262,6 +1266,20 @@ static int _api_xip_config(const struct device *dev,
 	return 0;
 }
 
+static int api_timing_config(const struct device *dev,
+			     const struct mspi_dev_id *dev_id,
+			     const uint32_t param_mask, void *cfg)
+{
+	struct mspi_dw_data *dev_data = dev->data;
+	struct mspi_dw_timing_cfg *config = cfg;
+
+	if (param_mask & MSPI_DW_RX_TIMING_CFG) {
+		dev_data->rx_sample_dly = config->rx_sample_dly;
+		return 0;
+	}
+	return -ENOTSUP;
+}
+
 static int api_xip_config(const struct device *dev,
 			  const struct mspi_dev_id *dev_id,
 			  const struct mspi_xip_cfg *cfg)
@@ -1407,6 +1425,7 @@ static DEVICE_API(mspi, drv_api) = {
 	.dev_config         = api_dev_config,
 	.get_channel_status = api_get_channel_status,
 	.transceive         = api_transceive,
+	.timing_config      = api_timing_config,
 #if defined(CONFIG_MSPI_XIP)
 	.xip_config         = api_xip_config,
 #endif

include/zephyr/drivers/mspi/mspi_dw.h

@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2025 Tenstorrent AI ULC
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#ifndef ZEPHYR_INCLUDE_DRIVERS_MSPI_DW_H_
+#define ZEPHYR_INCLUDE_DRIVERS_MSPI_DW_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Designware MSPI configuration structure- this should be passed to the
+ * MSPI driver when calling mspi_timing_config
+ */
+struct mspi_dw_timing_cfg {
+	uint32_t rx_sample_dly; /* RX sample delay, written to RX_SAMPLE_DLY register */
+};
+
+/* Configure RX_SAMPLE_DLY register for MSPI DW SSI */
+#define MSPI_DW_RX_TIMING_CFG BIT(0)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ZEPHYR_INCLUDE_DRIVERS_MSPI_DW_H_ */