[nrf fromlist] tests: drivers: i2s: Align tests to TDM peripheral

nRF54H series has TDM peripheral instead of I2S.

Upstream PR #: 82144

Signed-off-by: Adam Kondraciuk <[email protected]>

Author: adamkondraciuk

tests/drivers/i2s/i2s_api/Kconfig

@@ -15,7 +15,7 @@ config I2S_TEST_SEPARATE_DEVICES
 
 config I2S_TEST_USE_I2S_DIR_BOTH
 	bool "Use I2S_DIR_BOTH value to perform RX/TX transfers"
-	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	help
 	  Use the I2S_DIR_BOTH enumeration value to trigger commands in test
 	  cases involving both reception and transmission. Use of this option
@@ -24,15 +24,15 @@ config I2S_TEST_USE_I2S_DIR_BOTH
 
 config I2S_TEST_USE_GPIO_LOOPBACK
 	bool "Use GPIO loopback"
-	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	help
 	  Use wiring between the data-out and data-in pins for looping back
 	  data. This option is intended to be used for devices that do not
 	  provide the internal loopback functionality.
 
 config I2S_TEST_ALLOWED_DATA_OFFSET
 	int "Allowed offset in received data"
-	default 2 if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default 10 if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	default 0
 	help
 	  Maximum allowed offset between sent and received samples. Non-zero

tests/drivers/i2s/i2s_api/boards/nrf54h20dk_nrf54h20_cpuapp.overlay

@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/* i2s-node0 is the transmitter/receiver */
+
+/ {
+	aliases {
+		i2s-node0 = &tdm130;
+	};
+};
+
+&pinctrl {
+	tdm130_default_alt: tdm130_default_alt {
+		group1 {
+			psels = <NRF_PSEL(TDM_SCK_M, 1, 3)>,
+				<NRF_PSEL(TDM_FSYNC_M, 1, 6)>,
+				<NRF_PSEL(TDM_SDOUT, 1, 4)>,
+				<NRF_PSEL(TDM_SDIN, 1, 5)>;
+		};
+	};
+};
+
+&tdm130 {
+	status = "okay";
+	pinctrl-0 = <&tdm130_default_alt>;
+	pinctrl-names = "default";
+	memory-regions = <&cpuapp_dma_region>;
+};

tests/drivers/i2s/i2s_speed/Kconfig

@@ -15,7 +15,7 @@ config I2S_TEST_SEPARATE_DEVICES
 
 config I2S_TEST_USE_I2S_DIR_BOTH
 	bool "Use I2S_DIR_BOTH value to perform RX/TX transfers"
-	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	help
 	  Use the I2S_DIR_BOTH enumeration value to trigger commands in test
 	  cases involving both reception and transmission. Use of this option
@@ -24,15 +24,15 @@ config I2S_TEST_USE_I2S_DIR_BOTH
 
 config I2S_TEST_USE_GPIO_LOOPBACK
 	bool "Use GPIO loopback"
-	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default y if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	help
 	  Use wiring between the data-out and data-in pins for looping back
 	  data. This option is intended to be used for devices that do not
 	  provide the internal loopback functionality.
 
 config I2S_TEST_ALLOWED_DATA_OFFSET
 	int "Allowed offset in received data"
-	default 2 if DT_HAS_NORDIC_NRF_I2S_ENABLED
+	default 2 if DT_HAS_NORDIC_NRF_I2S_ENABLED || DT_HAS_NORDIC_NRF_TDM_ENABLED
 	default 0
 	help
 	  Maximum allowed offset between sent and received samples. Non-zero

tests/drivers/i2s/i2s_speed/boards/nrf54h20dk_nrf54h20_cpuapp.overlay

@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2024 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/* i2s-node0 is the transmitter/receiver */
+
+/ {
+	aliases {
+		i2s-node0 = &tdm130;
+	};
+};
+
+&pinctrl {
+	tdm130_default_alt: tdm130_default_alt {
+		group1 {
+			psels = <NRF_PSEL(TDM_SCK_M, 1, 3)>,
+				<NRF_PSEL(TDM_FSYNC_M, 1, 6)>,
+				<NRF_PSEL(TDM_SDOUT, 1, 4)>,
+				<NRF_PSEL(TDM_SDIN, 1, 5)>;
+		};
+	};
+};
+
+&tdm130 {
+	status = "okay";
+	pinctrl-0 = <&tdm130_default_alt>;
+	pinctrl-names = "default";
+	memory-regions = <&cpuapp_dma_region>;
+};