[nrf fromtree] kconfig: fix typo in (soc, subsys)

ndrs-pst · sean-madigan · commit 81fbb0722cd6 · 2025-08-07T11:10:26.000+01:00
Utilize a code spell-checking tool to scan for and correct spelling errors in `Kconfig` files within the `soc` and `subsys` directory. Additionally, incorporates a fix recommended by the reviewer. Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com> (cherry picked from commit 0ec49fa) Signed-off-by: Sean Madigan <sean.madigan@nordicsemi.no>
diff --git a/soc/atmel/sam0/common/Kconfig.samd2x b/soc/atmel/sam0/common/Kconfig.samd2x
@@ -8,7 +8,7 @@ config SOC_ATMEL_SAMD_NVM_WAIT_STATES
 	default 1
 	help
 	  Wait states to set for NVM. Consult the datasheet as these are highly
-	  dependent on the device operationg conditions.
+	  dependent on the device operating conditions.
 
 config SOC_ATMEL_SAMD_OSC32K
 	bool "Internal 32.768 kHz RC oscillator"
diff --git a/soc/espressif/esp32s3/Kconfig b/soc/espressif/esp32s3/Kconfig
@@ -152,7 +152,8 @@ config MAC_BB_PD
 	help
 	  If enabled, the MAC and baseband of Wi-Fi and Bluetooth will be powered
 	  down when PHY is disabled. Enabling this setting reduces power consumption
-	  by a small amount but increases RAM use by approximat
+	  by a small amount but increases RAM use by approximately 4KB (Wi-Fi only),
+	  2KB (Bluetooth only) or 5.3KB (Wi-Fi + Bluetooth).
 
 endmenu  # Cache config
 
diff --git a/soc/intel/intel_adsp/Kconfig b/soc/intel/intel_adsp/Kconfig
@@ -141,8 +141,8 @@ config XTENSA_WAITI_BUG
 config ADSP_IDLE_CLOCK_GATING
 	bool "DSP clock gating in Idle"
 	help
-	  When true, FW will run with enabled clock gating. This options change
-	  HW configuration of a DSP. Evry time core goes to the WAITI state
+	  When true, FW will run with enabled clock gating. This option changes
+	  HW configuration of a DSP. Every time core goes to the WAITI state
 	  (wait for interrupt) during idle, the clock can be gated (however, this
 	  does not mean that this will happen).
 
diff --git a/soc/intel/intel_adsp/Kconfig.defconfig b/soc/intel/intel_adsp/Kconfig.defconfig
@@ -18,7 +18,7 @@ config XTENSA_RPO_CACHE
 	def_bool y
 
 # console can't handle the amount of data coming from many tests, so introduce
-# a delay beween testcases.
+# a delay between testcases.
 if ZTEST
 config ZTEST_TEST_DELAY_MS
 	default 100
diff --git a/soc/nxp/imxrt/imxrt118x/Kconfig b/soc/nxp/imxrt/imxrt118x/Kconfig
@@ -40,11 +40,11 @@ config IMAGE_CONTAINER_OFFSET
 	default 0x1000
 	help
 	  Image container is a boot image format that is used by ROM. Container
-	  format consists container header, image arrary entry, signature block
+	  format consists of container header, image array entry, signature block
 	  and user program images and data. The boot ROM expects container data
 	  to be saved in external memory.
 
-# Note- This config present the offest between container header and user
+# Note- This config presents the offset between container header and user
 # image. If ROM_START_OFFSET changed, you also need to change CONTAINER_USER_IMAGE_OFFSET
 # value. CONTAINER_USER_IMAGE_OFFSET = ROM_START_OFFSET - IMAGE_CONTAINER_OFFSET.
 config CONTAINER_USER_IMAGE_OFFSET
diff --git a/soc/nxp/rw/Kconfig b/soc/nxp/rw/Kconfig
@@ -39,7 +39,7 @@ config FLASH_CONFIG_OFFSET
 	default 0x400
 	help
 	  The flash config offset provides the boot ROM with the on-board
-	  flash type and parameters. The boot ROM requires a fixed flash conifg
+	  flash type and parameters. The boot ROM requires a fixed flash config
 	  offset for FlexSPI device.
 
 config IMAGE_VECTOR_TABLE_OFFSET
diff --git a/soc/renesas/rx/Kconfig b/soc/renesas/rx/Kconfig
@@ -10,7 +10,7 @@ config RENESAS_NONE_USED_PORT_INIT
 	bool "Initialize unused ports"
 	default y
 	help
-	  Initialize the unsed pins of RX MCU followed by in the "Handling of
+	  Initialize the unused pins of RX MCU followed by in the "Handling of
 	  Unused Pins" section of PORT chapter of RX MCU of User's manual.
 	  Note: please MUST set "BSP_PACKAGE_PINS" definition to your device
 	  of pin type in r_bsp_config.h.
diff --git a/soc/silabs/Kconfig b/soc/silabs/Kconfig
@@ -9,7 +9,7 @@ if SOC_FAMILY_SILABS_S0 || SOC_FAMILY_SILABS_S1 || SOC_FAMILY_SILABS_S2
 config SOC_GECKO_SDID
 	int
 	help
-	  Gecko SDK sometime refere to the chipset using the internal ID. This
+	  Sometimes, Gecko SDK refers to the chipset using the internal ID. This
 	  entry reflects this ID.
 
 config SOC_GECKO_BURTC
diff --git a/soc/st/stm32/Kconfig b/soc/st/stm32/Kconfig
@@ -36,7 +36,7 @@ config STM32_ENABLE_DEBUG_SLEEP_STOP
 	  Some STM32 parts disable the DBGMCU in sleep/stop modes because
 	  of power consumption. As a side-effects this prevents
 	  debuggers from attaching w/o resetting the target. This
-	  effectivly destroys the use-case of `west attach`. Also
+	  effectively destroys the use-case of `west attach`. Also
 	  SEGGER RTT and similar technologies need this.
 
 config SWJ_ANALOG_PRIORITY
diff --git a/soc/st/stm32/Kconfig.defconfig b/soc/st/stm32/Kconfig.defconfig
@@ -3,7 +3,7 @@
 # Copyright (c) 2017, I-SENSE group of ICCS
 # SPDX-License-Identifier: Apache-2.0
 
-# Default configurations appplied tp the whole STM32 family
+# Default configurations applied to the whole STM32 family
 
 if SOC_FAMILY_STM32
 
diff --git a/subsys/bluetooth/controller/Kconfig b/subsys/bluetooth/controller/Kconfig
@@ -128,7 +128,7 @@ config BT_CTLR_SUBRATING_SUPPORT
 config BT_CTLR_CHANNEL_SOUNDING_SUPPORT
 	bool
 
-# Virtual option that all local LL implemenations should select
+# Virtual option that all local LL implementations should select
 config HAS_BT_CTLR
 	bool
 
diff --git a/subsys/canbus/isotp/Kconfig b/subsys/canbus/isotp/Kconfig
@@ -87,7 +87,7 @@ config ISOTP_RX_SF_FF_BUF_COUNT
 	default 4
 	help
 	  This buffer is used for first and single frames. It is extra because the
-	  buffer has to be ready for the first reception in isr context and therefor
+	  buffer has to be ready for the first reception in isr context and therefore
 	  is allocated when binding.
 	  Each buffer will occupy CAN_MAX_DLEN - 1 byte + header (sizeof(struct net_buf))
 	  amount of data.
diff --git a/subsys/debug/coredump/Kconfig b/subsys/debug/coredump/Kconfig
@@ -45,7 +45,7 @@ config DEBUG_COREDUMP_BACKEND_INTEL_ADSP_MEM_WINDOW
 	help
 	  Core dump is done via memory window slot[1].
 	  It is Intel ADSP memory region shared with xtensa DSP.
-	  Window 2 slot [1] is reserved for debuging information.
+	  Window 2 slot [1] is reserved for debugging information.
 
 config DEBUG_COREDUMP_BACKEND_OTHER
 	bool "Backend subsystem for coredump defined out of tree"
diff --git a/subsys/ipc/ipc_service/backends/Kconfig b/subsys/ipc/ipc_service/backends/Kconfig
@@ -23,7 +23,7 @@ config IPC_SERVICE_BACKEND_ICMSG
 	depends on DT_HAS_ZEPHYR_IPC_ICMSG_ENABLED
 	select IPC_SERVICE_ICMSG
 	help
-	  Chosing this backend results in single endpoint implementation based
+	  Choosing this backend results in single endpoint implementation based
 	  on circular packet buffer.
 
 config IPC_SERVICE_BACKEND_ICMSG_ME_INITIATOR
@@ -33,8 +33,8 @@ config IPC_SERVICE_BACKEND_ICMSG_ME_INITIATOR
 	depends on DT_HAS_ZEPHYR_IPC_ICMSG_ME_INITIATOR_ENABLED
 	select IPC_SERVICE_ICMSG_ME
 	help
-	  Chosing this backend results in multi endpoint implementation based
-	  on circular packet buffer. This enables enpoint discovery initiator
+	  Choosing this backend results in multi endpoint implementation based
+	  on circular packet buffer. This enables endpoint discovery initiator
 	  role.
 
 config IPC_SERVICE_BACKEND_ICMSG_ME_FOLLOWER
@@ -44,8 +44,8 @@ config IPC_SERVICE_BACKEND_ICMSG_ME_FOLLOWER
 	depends on DT_HAS_ZEPHYR_IPC_ICMSG_ME_FOLLOWER_ENABLED
 	select IPC_SERVICE_ICMSG_ME
 	help
-	  Chosing this backend results in multi endpoint implementation based
-	  on circular packet buffer. This enables enpoint discovery follower
+	  Choosing this backend results in multi endpoint implementation based
+	  on circular packet buffer. This enables endpoint discovery follower
 	  role.
 
 rsource "Kconfig.icmsg_me"
diff --git a/subsys/logging/Kconfig.processing b/subsys/logging/Kconfig.processing
@@ -114,7 +114,7 @@ config LOG_PROCESS_THREAD_PRIORITY
 	depends on LOG_PROCESS_THREAD_CUSTOM_PRIORITY
 	help
 	  The priority of the log processing thread.
-	  When not set the prority is set to K_LOWEST_APPLICATION_THREAD_PRIO.
+	  When not set the priority is set to K_LOWEST_APPLICATION_THREAD_PRIO.
 
 endif # LOG_PROCESS_THREAD
 
diff --git a/subsys/mgmt/ec_host_cmd/Kconfig.logging b/subsys/mgmt/ec_host_cmd/Kconfig.logging
@@ -8,7 +8,7 @@ config EC_HOST_CMD_LOG_DBG_BUFFERS
 	depends on EC_HC_LOG_LEVEL_DBG
 	help
 	  Every command is logged with the debug logging level. Use this config
-	  to decide, if full reqest and response buffers are logged alongside
+	  to decide if full request and response buffers are logged alongside
 	  other command parameters.
 
 config EC_HOST_CMD_LOG_SUPPRESSED_NUMBER
diff --git a/subsys/mgmt/mcumgr/smp/Kconfig b/subsys/mgmt/mcumgr/smp/Kconfig
@@ -31,7 +31,7 @@ config MCUMGR_SMP_CBOR_MIN_DECODING_LEVELS
 	help
 	  Minimal decoding levels, map/list encapsulation, required
 	  to be supported by zcbor decoding of SMP responses
-	  is auto genereated from MCUMGR_SMP_CBOR_MIN_DECODING_LEVEL_? options.
+	  is auto generated from MCUMGR_SMP_CBOR_MIN_DECODING_LEVEL_? options.
 	  A group or command that adds additional maps/lists above the
 	  base map, which is already taken into account, should
 	  select one of the MCUMGR_SMP_CBOR_MIN_DECODING_LEVEL_?.
@@ -87,7 +87,7 @@ config MCUMGR_SMP_CBOR_MIN_ENCODING_LEVELS
 	help
 	  Minimal encoding levels, map/list encapsulation, required
 	  to be supported by zcbor encoding of SMP responses
-	  is auto genereated from MCUMGR_SMP_CBOR_MIN_ENCODING_LEVEL_? options.
+	  is auto generated from MCUMGR_SMP_CBOR_MIN_ENCODING_LEVEL_? options.
 	  A group or command that adds additional maps/lists above the
 	  base map, which is already taken into account, should
 	  select one of the MCUMGR_SMP_CBOR_MIN_ENCODING_LEVEL_?.
