[nrf fromtree] soc: nrf54h: remove deprecated gpd (global power domain) driver

Remove the deprecated GPD (Global Power Domain) driver.

Signed-off-by: Bjarki Arge Andreasen <[email protected]>
(cherry picked from commit 2854115)

Author: bjarki-andreasen

drivers/spi/spi_nrfx_spis.c

@@ -34,10 +34,12 @@ BUILD_ASSERT(!IS_ENABLED(CONFIG_PM_DEVICE_SYSTEM_MANAGED));
  * - HAL design (requirement of drv_inst_idx in nrfx_spis_t)
  * - Name-based HAL IRQ handlers, e.g. nrfx_spis_0_irq_handler
  */
-#define SPIS_NODE(idx) COND_CODE_1(SPIS_IS_FAST(idx), (spis##idx), (spi##idx))
+#define SPIS_NODE(idx) \
+	COND_CODE_1(DT_NODE_EXISTS(DT_NODELABEL(spis##idx)), (spis##idx), (spi##idx))
 #define SPIS(idx) DT_NODELABEL(SPIS_NODE(idx))
 #define SPIS_PROP(idx, prop) DT_PROP(SPIS(idx), prop)
 #define SPIS_HAS_PROP(idx, prop) DT_NODE_HAS_PROP(SPIS(idx), prop)
+#define SPIS_IS_FAST(idx) NRF_DT_IS_FAST(SPIS(idx))
 
 #define SPIS_PINS_CROSS_DOMAIN(unused, prefix, idx, _)			\
 	COND_CODE_1(DT_NODE_HAS_STATUS_OKAY(SPIS(prefix##idx)),		\
@@ -595,7 +597,7 @@ static int spi_nrfx_init(const struct device *dev)
 		     !(DT_GPIO_FLAGS(SPIS(idx), wake_gpios) & GPIO_ACTIVE_LOW),\
 		     "WAKE line must be configured as active high");	       \
 	PM_DEVICE_DT_DEFINE(SPIS(idx), spi_nrfx_pm_action,		       \
-		COND_CODE_1(NRF_DT_IS_FAST(SPIS(idx)), (0),		       \
+		COND_CODE_1(SPIS_IS_FAST(idx), (0),			       \
 			    (PM_DEVICE_ISR_SAFE)));			       \
 	SPI_DEVICE_DT_DEFINE(SPIS(idx),					       \
 			    spi_nrfx_init,				       \

dts/bindings/power/nordic,nrf-gpd.yaml

@@ -169,13 +169,13 @@
 
 		fll16m: fll16m {
 			compatible = "nordic,nrf-fll16m";
-			clock-names = "hfxo", "lfxo";
+			status = "disabled";
 			#clock-cells = <0>;
 			clock-frequency = <DT_FREQ_M(16)>;
 			open-loop-accuracy-ppm = <20000>;
 			open-loop-startup-time-us = <200>; /* To be measured */
 			clocks = <&hfxo>, <&lfxo>;
-			status = "disabled";
+			clock-names = "hfxo", "lfxo";
 		};
 
 		hsfll120: hsfll120 {

dts/vendor/nordic/nrf54h20.dtsi

@@ -14,7 +14,6 @@
 
 #include <zephyr/devicetree.h>
 #include <zephyr/dt-bindings/pinctrl/nrf-pinctrl.h>
-#include <zephyr/dt-bindings/power/nordic-nrf-gpd.h>
 #include <zephyr/types.h>
 
 #ifdef __cplusplus
@@ -56,16 +55,6 @@ typedef uint32_t pinctrl_soc_pin_t;
 			(), NRF_GET_FUN(DT_PROP_BY_IDX(node_id, prop, idx)))        \
 		      0)), (0))
 
-/**
- * @brief Utility macro to get the GPD_FAST_ACTIVE1 flag
- *
- * @param p_node_id Parent node identifier.
- */
-#define Z_GET_GPD_FAST_ACTIVE1(p_node_id)				       \
-	COND_CODE_1(DT_NODE_HAS_PROP(p_node_id, power_domains),		       \
-		    ((DT_PHA(p_node_id, power_domains, id) ==		       \
-		      NRF_GPD_FAST_ACTIVE1) << NRF_GPD_FAST_ACTIVE1_POS), (0))
-
 /**
  * @brief Utility macro to initialize each pin.
  *
@@ -109,14 +98,6 @@ typedef uint32_t pinctrl_soc_pin_t;
 #define NRF_GET_CLOCKPIN_ENABLE(pincfg) \
 	(((pincfg) >> NRF_CLOCKPIN_ENABLE_POS) & NRF_CLOCKPIN_ENABLE_MSK)
 
-/**
- * @brief Utility macro to obtain GPD_FAST_ACTIVE1 flag
- *
- * @param pincfg Pin configuration bit field.
- */
-#define NRF_GET_GPD_FAST_ACTIVE1(pincfg) \
-	(((pincfg) >> NRF_GPD_FAST_ACTIVE1_POS) & NRF_GPD_FAST_ACTIVE1_MSK)
-
 /**
  * @brief Utility macro to obtain pin inversion flag.
  *

include/zephyr/dt-bindings/power/nordic-nrf-gpd.h

@@ -18,4 +18,3 @@ zephyr_include_directories(.)
 zephyr_linker_sources(SECTIONS SORT_KEY zzz_place_align_at_end align.ld)
 
 add_subdirectory(bicr)
-add_subdirectory(gpd)