[nrf fromtree] Bluetooth: drivers: Use bt_hci_cmd_alloc()

Use bt_hci_cmd_alloc() instead of the soon to be deprecated
bt_hci_cmd_create().

Signed-off-by: Johan Hedberg <[email protected]>
(cherry picked from commit c186a31)

Author: jhedberg

drivers/bluetooth/hci/apollox_blue.c

@@ -396,8 +396,7 @@ static int bt_apollo_set_nvds(void)
 #else
 	uint8_t *p;
 
-	buf = bt_hci_cmd_create(HCI_VSC_UPDATE_NVDS_CFG_CMD_OPCODE,
-				HCI_VSC_UPDATE_NVDS_CFG_CMD_LENGTH);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		return -ENOBUFS;
 	}

drivers/bluetooth/hci/h4_ifx_cyw43xxx.c

@@ -122,8 +122,7 @@ static int bt_update_controller_baudrate(const struct device *bt_uart_dev, uint3
 	/* Allocate buffer for update uart baudrate command.
 	 * It will be BT_HCI_OP_RESET with extra parameters.
 	 */
-	buf = bt_hci_cmd_create(BT_HCI_VND_OP_UPDATE_BAUDRATE,
-				HCI_VSC_UPDATE_BAUD_RATE_LENGTH);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (buf == NULL) {
 		LOG_ERR("Unable to allocate command buffer");
 		return -ENOMEM;
@@ -172,7 +171,7 @@ static int bt_firmware_download(const uint8_t *firmware_image, uint32_t size)
 		uint16_t op_code = *(uint16_t *)data;
 
 		/* Allocate buffer for hci_write_ram/hci_launch_ram command. */
-		buf = bt_hci_cmd_create(op_code, data_length);
+		buf = bt_hci_cmd_alloc(K_FOREVER);
 		if (buf == NULL) {
 			LOG_ERR("Unable to allocate command buffer");
 			return err;

drivers/bluetooth/hci/hci_ifx_cyw208xx.c

@@ -146,7 +146,7 @@ static int cyw208xx_bt_firmware_download(const uint8_t *firmware_image, uint32_t
 		}
 
 		/* Allocate buffer for hci_write_ram/hci_launch_ram command. */
-		buf = bt_hci_cmd_create(op_code, data_length);
+		buf = bt_hci_cmd_alloc(K_FOREVER);
 		if (buf == NULL) {
 			LOG_ERR("Unable to allocate command buffer");
 			return -ENOBUFS;
@@ -211,7 +211,7 @@ static int cyw208xx_setup(const struct device *dev, const struct bt_hci_setup_pa
 	cybt_platform_hci_wait_for_boot_fully_up(false);
 
 	/* Set public address */
-	buf = bt_hci_cmd_create(BT_HCI_VND_OP_SET_LOCAL_DEV_ADDR, BTM_SET_LOCAL_DEV_ADDR_LENGTH);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (buf == NULL) {
 		LOG_ERR("Unable to allocate command buffer");
 		cyhal_syspm_unlock_deepsleep();
@@ -375,7 +375,7 @@ wiced_bt_dev_vendor_specific_command(uint16_t opcode, uint8_t param_len, uint8_t
 	struct net_buf *buf = NULL;
 
 	/* Allocate a HCI command buffer */
-	buf = bt_hci_cmd_create(opcode, param_len);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		LOG_ERR("Unable to allocate buffer");
 		return WICED_NO_MEMORY;

drivers/bluetooth/hci/hci_ifx_psoc6_bless.c

@@ -203,7 +203,7 @@ static int psoc6_bless_setup(const struct device *dev, const struct bt_hci_setup
 		addr[5], addr[4], addr[3], addr[2], addr[1], addr[0], BT_ADDR_LE_PUBLIC,
 	};
 
-	buf = bt_hci_cmd_create(PSOC6_BLESS_OP_SET_PUBLIC_ADDR, sizeof(hci_data));
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (buf == NULL) {
 		LOG_ERR("Unable to allocate command buffer");
 		return -ENOMEM;

drivers/bluetooth/hci/hci_nxp.c

@@ -94,7 +94,7 @@ static int nxp_bt_send_vs_command(uint16_t opcode, const uint8_t *params, uint8_
 		struct net_buf *buf;
 
 		/* Allocate buffer for the hci command */
-		buf = bt_hci_cmd_create(opcode, params_len);
+		buf = bt_hci_cmd_alloc(K_FOREVER);
 		if (buf == NULL) {
 			LOG_ERR("Unable to allocate command buffer");
 			return -ENOMEM;

drivers/bluetooth/hci/hci_nxp_setup.c

@@ -1281,7 +1281,7 @@ static int bt_nxp_set_calibration_data_annex55(void)
 	if (IS_ENABLED(CONFIG_BT_HCI_HOST)) {
 		struct net_buf *buf;
 
-		buf = bt_hci_cmd_create(opcode, HCI_CMD_STORE_BT_CAL_DATA_PARAM_LENGTH);
+		buf = bt_hci_cmd_alloc(K_FOREVER);
 		if (buf == NULL) {
 			LOG_ERR("Unable to allocate command buffer");
 			return -ENOMEM;
@@ -1346,7 +1346,7 @@ static int bt_nxp_set_calibration_data_annex100(void)
 	if (IS_ENABLED(CONFIG_BT_HCI_HOST)) {
 		struct net_buf *buf;
 
-		buf = bt_hci_cmd_create(opcode, HCI_CMD_STORE_BT_CAL_DATA_PARAM_ANNEX100_LENGTH);
+		buf = bt_hci_cmd_alloc(K_FOREVER);
 		if (buf == NULL) {
 			LOG_ERR("Unable to allocate command buffer");
 			return -ENOMEM;
@@ -1387,8 +1387,7 @@ static int bt_hci_baudrate_update(const struct device *dev, uint32_t baudrate)
 	int err;
 	struct net_buf *buf;
 
-	buf = bt_hci_cmd_create(BT_HCI_VSC_BAUDRATE_UPDATE_OPCODE,
-				BT_HCI_VSC_BAUDRATE_UPDATE_LENGTH);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		LOG_ERR("Fail to allocate buffer");
 		return -ENOBUFS;

drivers/bluetooth/hci/hci_spi_st.c

@@ -335,7 +335,7 @@ static int bt_spi_send_aci_config(uint8_t offset, const uint8_t *value, size_t v
 	hdr.param_len = data_len;
 	buf = bt_buf_get_tx(BT_BUF_CMD, K_NO_WAIT, &hdr, sizeof(hdr));
 #else
-	buf = bt_hci_cmd_create(BLUENRG_ACI_WRITE_CONFIG_DATA, data_len);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 #endif /* CONFIG_BT_HCI_RAW */
 
 	if (!buf) {

drivers/bluetooth/hci/hci_stm32wba.c

@@ -432,7 +432,7 @@ static int bt_hci_stm32wba_setup(const struct device *dev,
 		return -ENOMSG;
 	}
 
-	buf = bt_hci_cmd_create(ACI_HAL_WRITE_CONFIG_DATA, sizeof(*param));
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		return -ENOBUFS;
 	}

drivers/bluetooth/hci/ipm_stm32wb.c

@@ -433,8 +433,7 @@ static int bt_ipm_set_addr(void)
 		return -ENOMSG;
 	}
 
-	buf = bt_hci_cmd_create(ACI_HAL_WRITE_CONFIG_DATA, sizeof(*param));
-
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		return -ENOBUFS;
 	}
@@ -468,7 +467,7 @@ static int bt_ipm_ble_init(void)
 		LOG_ERR("Can't set BLE UID addr");
 	}
 	/* Send ACI_WRITE_SET_TX_POWER_LEVEL */
-	buf = bt_hci_cmd_create(ACI_WRITE_SET_TX_POWER_LEVEL, 3);
+	buf = bt_hci_cmd_alloc(K_FOREVER);
 	if (!buf) {
 		return -ENOBUFS;
 	}