[nrf fromlist] drivers: nrfwifi: Fix the undefined macro usage

This works because undefined macro in conditional is treated as zero,
but could end up choosing the wrong divider.

Fix the macro with the new name.

Upstream PR #: 80780

Signed-off-by: Chaitanya Tata <[email protected]>

Author: krish2718

drivers/wifi/nrfwifi/src/qspi/src/qspi_if.c

@@ -85,20 +85,20 @@ BUILD_ASSERT(QSPI_IF_DEVICE_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 16),
  * PCLK192M frequency"), but after that operation is complete, the default
  * divider needs to be restored to avoid increased current consumption.
  */
-#if (INST_0_SCK_FREQUENCY >= NRF_QSPI_BASE_CLOCK_FREQ)
+#if (QSPI_IF_DEVICE_FREQUENCY >= NRF_QSPI_BASE_CLOCK_FREQ)
 /* For requested SCK >= 96 MHz, use HFCLK192M / 1 / (2*1) = 96 MHz */
 #define BASE_CLOCK_DIV NRF_CLOCK_HFCLK_DIV_1
 #define INST_0_SCK_CFG NRF_QSPI_FREQ_DIV1
 /* If anomaly 159 is to be prevented, only /1 divider can be used. */
 #elif NRF53_ERRATA_159_ENABLE_WORKAROUND
 #define BASE_CLOCK_DIV NRF_CLOCK_HFCLK_DIV_1
 #define INST_0_SCK_CFG (DIV_ROUND_UP(NRF_QSPI_BASE_CLOCK_FREQ, \
-				     INST_0_SCK_FREQUENCY) - 1)
-#elif (INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 2))
+				     QSPI_IF_DEVICE_FREQUENCY) - 1)
+#elif (QSPI_IF_DEVICE_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 2))
 /* For 96 MHz > SCK >= 48 MHz, use HFCLK192M / 2 / (2*1) = 48 MHz */
 #define BASE_CLOCK_DIV NRF_CLOCK_HFCLK_DIV_2
 #define INST_0_SCK_CFG NRF_QSPI_FREQ_DIV1
-#elif (INST_0_SCK_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 3))
+#elif (QSPI_IF_DEVICE_FREQUENCY >= (NRF_QSPI_BASE_CLOCK_FREQ / 3))
 /* For 48 MHz > SCK >= 32 MHz, use HFCLK192M / 1 / (2*3) = 32 MHz */
 #define BASE_CLOCK_DIV NRF_CLOCK_HFCLK_DIV_1
 #define INST_0_SCK_CFG NRF_QSPI_FREQ_DIV3