Complete rewrite of the 54l_ns DT board definition.

Now the secure board and non-secure board re-use a lot more code,
giving us a more maintainable solution.

Signed-off-by: Sebastian Bøe <[email protected]>
(cherry picked from commit 5e11b5f)

…eferences"

This reverts commit b876bd2.

That needs mbed TLS 3.6.0 to work, as pk_ecc.c was added in that
version.

To be reverted, when mbed TLS is updated to 3.6.0 in NCS.

Signed-off-by: Robert Lubos <[email protected]>
(cherry picked from commit 590a64a)

Removes explicit support for the legacy advertiser due
to incompatibility with SDC.

The legacy advertiser can be used (experimentally) with the
Zephyr Link Layer enabled, but is not recommended.

Signed-off-by: Håvard Reierstad <[email protected]>
(cherry picked from commit 60fce5e)

Disable processing of extended ADV packets by mesh scanner.
This is done to prevent loss of scan time due to reception
of pointer packets while scanning for mesh packets.

Signed-off-by: Ingar Kulbrandstad <[email protected]>
(cherry picked from commit 18285a0)

Changes the default MCUboot mode to update only for the thingy53,
to align with previous bootloader builds

Signed-off-by: Jamie McCrae <[email protected]>
(cherry picked from commit 48cb4e7)

Align to changes in DTS:
  renamed: rram0 -> cpuapp_rram
  sized up cpauapp_rram region szie as part of it was reserved for
  cpuflpr_rram (which is not used by this config).

Signed-off-by: Andrzej Puzdrowski <[email protected]>
(cherry picked from commit c3898cc)

This will be replaced by a different solution upstream (NCSDK-27673).

Migrate the existing BICR bindings from NCS 2.4.99-cs3 to NCS 2.7.0.
They are updated to remove obsoleted values. Enable generating bicr.hex
for Application core by default.

Signed-off-by: Grzegorz Swiderski <[email protected]>
(cherry picked from commit eb8e8ef)

Adjustment LFXO CLOAD value. New value is a resualt of DK's characterization.

Signed-off-by: Karol Lisak <[email protected]>
(cherry picked from commit fa10fde)

PM support is still required for nRF53 in the context of NCS.

Signed-off-by: Gerard Marull-Paretas <[email protected]>
(cherry picked from commit b42e02d)

Introduce NVS_LOOKUP_CACHE_FOR_SETTINGS Kconfig option that
enables a dedicated hash function for the NVS lookup cache
that takes advantage of the NVS ID allocation scheme used
by the NVS settings backend. As such, this option should
only be used if an application uses NVS via the settings
layer.

Signed-off-by: Damian Krolik <[email protected]>
(cherry picked from commit 3198700)

This adds temporary entropy driver simulation for
nRF54h20 device since final entropy source is not
available yet.

TODO: Remove this commit when proper solution will
be available.

Jira: NCSDK-25947

Signed-off-by: Kamil Gawor <[email protected]>
Signed-off-by: Robert Lubos <[email protected]>
(cherry picked from commit c80ee99)

Allow for an additional buffer reference if callback is provided. This
can be used to extend lifetime of the net buffer until the data
transmission is confirmed by ACK of the remote.

Jira: NCSDK-27422

Signed-off-by: Marek Pieta <[email protected]>
(cherry picked from commit c735ea2)

By default, the BLE stack calls sent callback for ATT data when the data
is passed to BLE controller for transmission. Enabling this Kconfig
option delays calling the sent callback until data transmission is
finished by BLE controller (the callback is delayed until receiving the
num complete packets event).

Jira: NCSDK-27422

Signed-off-by: Marek Pieta <[email protected]>
(cherry picked from commit 3611f46)

Turn off suspending MRAM for NRF54H20 DK
This change is required so sections of code
depending on critical timings will not have unacceptable latency.

Turn on NRFS globally so turning off
suspending MRAM for NRF54H20 DK will work.

Signed-off-by: Jan Zyczkowski <[email protected]>
(cherry picked from commit 58284ff)
(cherry picked from commit 9b6cae8)
(cherry picked from commit 2c2f60d)

…_pool

`struct acl_data` is used even when Host flow control is not enabled.
It is written to through the `acl(buf)` accessor in `conn.c:hci_acl()`.

Hopefully no netbufs were harmed by that :/

Signed-off-by: Jonathan Rico <[email protected]>
(cherry picked from commit 792ae68)

…eset timeout

Some HCI drivers issue HCI reset when disabling, like the IPC HCI
driver. We need to keep the RX thread running to allow receiving
the command complete.

This commit postpones aborting the RX thread until this is done.
The issue happens started occuring after commit
d0e75ab87c4b53d66008c941c38709a2fca9dbea.

Fixes #76202.

Upstream PR: zephyrproject-rtos/zephyr#76203

Signed-off-by: Rubin Gerritsen <[email protected]>

By default, the BLE stack calls sent callback for ATT data when the data
is passed to BLE controller for transmission. Enabling this Kconfig
option delays calling the sent callback until data transmission is
finished by BLE controller (the callback is delayed until receiving the
num complete packets event).

Jira: NCSDK-27422

Signed-off-by: Marek Pieta <[email protected]>
(cherry picked from commit d74e0b5)

The function `bt_hci_le_past_received_v2()` is not compiled
in for this configuration, so the reference needs to be removed.

Fixes #76268.

Upstream PR: zephyrproject-rtos/zephyr#76269

Signed-off-by: Rubin Gerritsen <[email protected]>

Allow for an additional buffer reference if callback is provided. This
can be used to extend lifetime of the net buffer until the data
transmission is confirmed by ACK of the remote.

Signed-off-by: Marek Pieta <[email protected]>

k_sched* are not avaliable when there is CONFIG_MULTITHREADING=n

Upstream PR: zephyrproject-rtos/zephyr#76550

Signed-off-by: Piotr Kosycarz <[email protected]>

It was pointed out in a future PR that they should have
a corresponding experimental Kconfig entry.

See PR #73795.

This updates the APIs added in PR #73826 and PR #74295.

Signed-off-by: Rubin Gerritsen <[email protected]>
(cherry picked from commit 85eadcf)

When implementing vendor specific HCI APIs and events,
we want to be able to convert between host objects,
handles and back again.

Exposing this API makes that possible.

Signed-off-by: Rubin Gerritsen <[email protected]>
(cherry picked from commit 5b14748)

…le()

When implementing vendor specific HCI APIs and events,
we want to be able to convert between host objects,
handles and back again.

Exposing this API makes that possible.

Signed-off-by: Rubin Gerritsen <[email protected]>
(cherry picked from commit e28207d)

When implementing vendor specific HCI APIs and events,
we want to be able to convert between host objects,
handles and back again.

Exposing this API makes that possible

Signed-off-by: Rubin Gerritsen <[email protected]>
(cherry picked from commit 2967bd8)

… characteristic

Integrated the application version feature of the build system with
the default configuration of the Bluetooth DIS module and its Firmware
Revision characteristic.

The firmware revision string now defaults to APP_VERSION_TWEAK_STRING
if the application version feature is used in a project. This specific
version format is used to unify version formatting with other parts of
Zephyr like the MCUboot module and its versioning Kconfig:
CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION

Signed-off-by: Kamil Piszczek <[email protected]>
(cherry picked from commit f9a5699)

Update the HW models module to:
53635212495e4575955fc717369be4362126456a

Including the following:
* 53635212 nRF54L15 MDK: Redefine NRF_RADIO_*_BASE to point to model
* 4a92c424 NHW_IPC: Fix out of bounds read
* 2dae79b5 RADIO: Add nRF54 support

Signed-off-by: Alberto Escolar Piedras <[email protected]>
(cherry picked from commit e91b336)

Update the HW models module to:
4447a22aea5e791c9bd18e7d71cc092623ddd2bb

Including the following:
* 4447a22a CLOCK,POWER,RESET: Add stubs for the 54L

Signed-off-by: Alberto Escolar Piedras <[email protected]>
(cherry picked from commit 8d6d700)

Update the HW models module to:
6c389b9b5fa0a079cd4502e69d375da4c0c289b7

Including the following:
* 6c389b9 PPI (52): Connect CCM TASK_RATEOVERRIDE
* 2056253 CCM: Change TASK RATEOVERRIDE warning to info

Signed-off-by: Alberto Escolar Piedras <[email protected]>
(cherry picked from commit fd236ee)

Update the HW models module to:
3ede17158a9fe85c160e0384c0ad0306e24ee47e

Including the following:
* 3ede171 GRTC: Expose nhw_GRTC_counter_to_time()
* 2726f8b RTC: Define nhw_rtc_start_time_get()
* cc6fb0f hal: hack: Add nrf_hack function for triggering a task
* 03ca9b5 MWU: Add registers stub

Signed-off-by: Rubin Gerritsen <[email protected]>
(cherry picked from commit 08cd4b6)

sampling

Calibrate adc before taking measurement.

Upstream PR: zephyrproject-rtos/zephyr#76088

Signed-off-by: Bartlomiej Buczek <[email protected]>

nrf54 targets

add channel in overlay of nrf54 targets to increase test coverage.

Upstream PR: zephyrproject-rtos/zephyr#76569

Signed-off-by: Bartlomiej Buczek <[email protected]>

Add separate Kconfig to be used by the host LE Subrating implementation.

Signed-off-by: Aleksandar Stanoev <[email protected]>
(cherry picked from commit c417bd2)

Adds support for LE Connection Subrating as defined in Core 5.4
Vol 6, Part B, Section 5.1.19.
As this is primarily a controller feature, the host support is mostly
a wrapper around the relevant HCI commands.

Note that subrating provides a new method to update the connection's
peripheral latency and supervision timeout alongside subrating parameters.

Signed-off-by: Aleksandar Stanoev <[email protected]>
(cherry picked from commit db9bcdc)

… Subrating

Add commands to allow requesting a subrate change via the BT shell.
A new build configuration has been added to ensure this is tested in CI.

Signed-off-by: Aleksandar Stanoev <[email protected]>
(cherry picked from commit 52ffbd8)

nrf-squash! [nrf noup] dts: nordic: Add support for BICR generation

- Extend the DT binding with lfosc-mode "disabled".
- Skip extra args when generating the BICR for now.

Signed-off-by: Grzegorz Swiderski <[email protected]>