Upstream not ready yet, revert once applied there.

Signed-off-by: Gerard Marull-Paretas <[email protected]>

Busy-waiting for the result of the nrfs service calls can stall, so
let's use a callback that flags a semaphore instead. Since the API is
supposed to be callable in the context of pre-kernel, fallback to
busy-wait on that scenario.

Upstream PR #: 80819

Signed-off-by: Gerard Marull-Paretas <[email protected]>
(cherry picked from commit 714d82d232977309e0bdc8dadd2d7a71ee914a4b)

…FIG_DEBUG=y

Usage of K_SPINLOCK with CONFIG_DEBUG=y seems to trigger a compiler
warning about request not always being initialized. Fallback to
k_spin_lock/unlock calls to fix this issue.

Signed-off-by: Gerard Marull-Paretas <[email protected]>
(cherry picked from commit 5249619)

Added hsfll120 clock for fast PWM120 nodes.

Upstream PR #: 80672

Signed-off-by: Michał Stasiak <[email protected]>

Fast PWM120 instance works with 320MHz clock, thus
pwm_nrfx_get_cycles_per_sec needs to be adjusted,
applying correct clock frequency.
Also, it uses cachable RAM, thus sys_cache function
needs to be added to flush the cached sequence.

Upstream PR #: 80672

Signed-off-by: Michał Stasiak <[email protected]>

Help text fixes from doc-team.

Signed-off-by: Richa Pandey <[email protected]>
Signed-off-by: Chaitanya Tata <[email protected]>
(cherry picked from commit 580707e)

Updated manifest to include fix for incorrect display of scan
results when APs have EAP and PMF enabled.

Fixes #80995.

Upstream PR #: 80998

Signed-off-by: Karun Kumar Eagalapati <[email protected]>

fixup! [nrf noup] samples/smp_svr: nrf54l15pdk ext-flash partition

Added nrf54l15dk testcases as copies of nrf54l15pdk.

Signed-off-by: Andrzej Puzdrowski <[email protected]>

This fix calling seg_recv() callback being called even though channel
is being disconnected due to SDU overflow.

Upstream PR #: 80911

Signed-off-by: Szymon Janc <[email protected]>

This API gives better control on L2CAP COC credits and suits better
for Upper Tester implementation.

Upstream PR #: 80911

Signed-off-by: Szymon Janc <[email protected]>

…s pass

Without this PTS tests do not pass. These values are copied from a
commit aimed at unifying the prj.conf files in this directory. I do not
know which of these are strictly necessary to make the tests pass.
Copying them all poses no harm since the unification will be done later
anyway.

Upstream PR #: 80911

Co-authored-by: Szymon Janc <[email protected]>
Signed-off-by: Aleksander Wasaznik <[email protected]>

…l15dk

Incorrectly removed during transfer pdk->dk.

Upstream PR #: 81107

Signed-off-by: Piotr Kosycarz <[email protected]>

…15dk

Incorrectly removed during transfer pdk->dk.

Upstream PR #: 81107

Signed-off-by: Piotr Kosycarz <[email protected]>

nRF70 recovery relies on power-management feature which isn't applicable
for SAP, so, we keep seeing false recovery causing interface restart.

Disabled recovery for SAP to fix the issue.

Fixes #81130.

Upstream PR #: 81131

Signed-off-by: Chaitanya Tata <[email protected]>

… DK"

This reverts commit 38f2104.

Signed-off-by: Gerard Marull-Paretas <[email protected]>

Turn off suspending MRAM for nRF54H20 SoC.
This change is required so sections of code depending on critical
timings will not have unacceptable latency.

Signed-off-by: Jan Zyczkowski <[email protected]>
Signed-off-by: Gerard Marull-Paretas <[email protected]>
(cherry picked from commit 58284ff)
(cherry picked from commit 9b6cae8)
(cherry picked from commit 2c2f60d)

This patch fixes an issue where the reset pin is used even when it's
not given.

Signed-off-by: Maximilian Deubel <[email protected]>
(cherry picked from commit 4f85ce6)

The option notifies application that MCUboot has been configured
to use SHA512 for image hashing.

Signed-off-by: Dominik Ermel <[email protected]>

Adds support for images signed with SHA512.

Signed-off-by: Dominik Ermel <[email protected]>

Increase stack size as support for SHA512 requires more data.

Signed-off-by: Dominik Ermel <[email protected]>

Add pins retention control when GPD is enabled for SPIM.

Upstream PR #: 81134

Signed-off-by: Adam Kondraciuk <[email protected]>

Add pin retenion if GPD is enabled for nRF54H20.

Upstream PR #: 80672

Signed-off-by: Michał Stasiak <[email protected]>

FAST_ACTIVE1 domain needs to be kept ON while the peripheral is
active (always in this driver).

Signed-off-by: Gerard Marull-Paretas <[email protected]>

Fix and update triggers for SUIT DFU tests.

Signed-off-by: Krzysztof Szromek <[email protected]>

… of s2ram_suspend

The return value of the system_off call is overwritten by the the call to
pm_s2ram_mark_check_and_clear. As arch_pm_s2ram_suspend needs to specify
why system_off failed, we need to make sure the rv of system_off is moved
to a safe register before calling pm_s2ram_mark_check_and_clear and moved
to r0 als rv of arch_pm_s2ram_suspend when the suspend call exits.

Upstream PR #: 80642

Signed-off-by: Hessel van der Molen <[email protected]>

IRQs must be disabled before starting any procedures to prepare
for low-power states.

Upstream PR #: 79067

Signed-off-by: Adam Kondraciuk <[email protected]>

To properly execute erase, recover and reset.

Upstream PR #: 81420

Signed-off-by: Piotr Kosycarz <[email protected]>

Uses a temporary file for dts output then uses CMake to copy to the
correct file if it has changed. This prevents a ping-pong issue when
sysbuild is used of configuring and building cycle when nothing has
changed and there is sysbuild code which loads in the devicetree
data from an image

Upstream PR #: 81340

Signed-off-by: Jamie McCrae <[email protected]>

Add unit tests for bt_le_cs_step_data_parse.
Also exit early (without calling the function pointer) if the next
step would seem to read out of bounds.

Signed-off-by: Olivier Lesage <[email protected]>
(cherry picked from commit 635d03b)

Signed-off-by: Sean Madigan <[email protected]>

The sample uses the Zephyr HTTP server library
and demonstrates the Prometheus metric
server node. Prometheus client library
runs as a pull method. The sample contains
the HTTP request counter and increases
when refresh path of '/metrics' from the browser.

Signed-off-by: Mustafa Abdullah Kus <[email protected]>
(cherry picked from commit 316e823)

Tests for prometheus library support.
It contains integration and unit test
each metric types.

Signed-off-by: Mustafa Abdullah Kus <[email protected]>
(cherry picked from commit abea54e)

Upstream NCS's library for storing Wi-Fi credentials.
This library allows storage of Wi-Fi credentials
using different backends.
Either the Zephyr settings subsystem
or the PSA secure backend can be used.
For testing purposes, credentials can be defined statically.

Signed-off-by: Ravi Dondaputi <[email protected]>
Signed-off-by: Kapil Bhatt <[email protected]>
Signed-off-by: Gregers Gram Rygg <[email protected]>
Signed-off-by: Kaja Koren <[email protected]>
Signed-off-by: Simen S. Røstad <[email protected]>
Signed-off-by: Maximilian Deubel <[email protected]>
(cherry picked from commit f6d305a)

This patch adds a feature to directly connect to stored Wi-Fi
credentials without having to compose the NET_MGMT commands yourself.

Signed-off-by: Maximilian Deubel <[email protected]>
(cherry picked from commit e7ce0f5)

This patch adds tests for the wifi_credentials library.

Both the main functions and the backend implementations are tested.

Signed-off-by: Maximilian Deubel <[email protected]>
(cherry picked from commit a441492)

Adjust the testcase.yaml files to only allow running on native_sim.
These tests use mocking and are not meant to run on embedded platforms.

Signed-off-by: Maximilian Deubel <[email protected]>
(cherry picked from commit d56e22d)

Add 11k cmds support. User can issue 11k cmds to enable/disable 11k and
send Neighbor Report Request packet.

Signed-off-by: Hui Bai <[email protected]>
(cherry picked from commit 7c167c6)

Add 80211R support in hostap.
Add cmd wifi connect option '-R' to enable 80211R.

Signed-off-by: Hui Bai <[email protected]>
(cherry picked from commit 91ec46e)

Add support for building NXP WiFi. Since the driver typically requires
binary blobs, enable CONFIG_NXP_WIFI_BUILD_ONLY_MODE for this testcase.

Signed-off-by: Daniel DeGrasse <[email protected]>
(cherry picked from commit a3d2b86)

Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.

Signed-off-by: Hui Bai <[email protected]>
(cherry picked from commit 83812f2)

Enumerations were extended but respective strings were not added.

Signed-off-by: Chaitanya Tata <[email protected]>
(cherry picked from commit fd7fc17)

Updated manifest to include separate security types for 802.1X
in display of scan results when APs have EAP and PMF enabled.
BSS display limit based on user-configured non-zero values
set via CMD_INIT, along with support for few other regulatory
domain updates in firmware.

Upstream PR #: 81514

Signed-off-by: Karun Kumar Eagalapati <[email protected]>

EAP_TLS_SHA256 was being identified as EAP_TLS in display scan
results. Identify the security type in scan results sent by
RPU and display accordingly.

Upstream PR #: 81514

Signed-off-by: Ravi Dondaputi <[email protected]>

Expand the security modes identified in the display-scan
results. Add appropriate strings for corresponding
enumerations.

Upstream PR #: 81514

Signed-off-by: Ravi Dondaputi <[email protected]>