efi/cper: Print correctable AER information

Currently, cper_print_pcie() only logs Uncorrectable Error Status, Mask
and Severity registers along with the TLP header.

If a correctable error is received immediately preceding or following an
Uncorrectable Fatal Error, its information is lost since Correctable
Error Status and Mask registers are not logged.

As such, to avoid skipping any possible error information, Correctable
Error Status and Mask registers should also be logged.

Additionally, ensure that AER information is also available through
cper_print_pcie() for Correctable and Uncorrectable Non-Fatal Errors.

Signed-off-by: Yazen Ghannam <[email protected]>
Tested-by: Avadhut Naik <[email protected]>
Signed-off-by: Avadhut Naik <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>

Author: yghannam

drivers/firmware/efi/cper.c

@@ -434,12 +434,17 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
 
-	/* Fatal errors call __ghes_panic() before AER handler prints this */
-	if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) &&
-	    (gdata->error_severity & CPER_SEV_FATAL)) {
+	/*
+	 * Print all valid AER info. Record may be from BERT (boot-time) or GHES (run-time).
+	 *
+	 * Fatal errors call __ghes_panic() before AER handler prints this.
+	 */
+	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) {
 		struct aer_capability_regs *aer;
 
 		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_cor_status: 0x%08x, aer_cor_mask: 0x%08x\n",
+		       pfx, aer->cor_status, aer->cor_mask);
 		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
 		       pfx, aer->uncor_status, aer->uncor_mask);
 		printk("%saer_uncor_severity: 0x%08x\n",