@@ -12,7 +12,7 @@ dnl Copyright (c) 2004-2005 The Regents of the University of California.
1212dnl All rights reserved.
1313dnl Copyright (c) 2006-2010 Oracle and/or its affiliates. All rights reserved.
1414dnl Copyright (c) 2009-2015 Cisco Systems, Inc. All rights reserved.
15- dnl Copyright (c) 2015 Research Organization for Information Science
15+ dnl Copyright (c) 2015-2016 Research Organization for Information Science
1616dnl and Technology (RIST). All rights reserved.
1717dnl $COPYRIGHT $
1818dnl
172172
173173 AS_IF([test -n " $rpath_args "
174174 [WRAPPER_RPATH_SUPPORT= rpath
175- AC_MSG_RESULT([yes ($rpath_args )])],
175+ cat > $rpath_script << EOF
176+ #! /bin/sh
177+
178+ # Slurp in the libtool config into my environment
179+
180+ # Apparently, "libtoool --config" calls "exit", so we can't source it
181+ # (because if script A sources script B, and B calls "exit", then both
182+ # B and A will exit). Instead, we have to send the output to a file
183+ # and then source that.
184+ $OPAL_TOP_BUILDDIR /libtool --tag= FC --config > $rpath_outfile
185+
186+ chmod +x $rpath_outfile
187+ . ./$rpath_outfile
188+ rm -f $rpath_outfile
189+
190+ # Evaluate \$hardcode_libdir_flag_spec, and substitute in LIBDIR for \$libdir
191+ libdir= LIBDIR
192+ flags= " \` eval echo \$ hardcode_libdir_flag_spec\` "
193+ echo \$ flags
194+
195+ # Done
196+ exit 0
197+ EOF
198+ chmod +x $rpath_script
199+ rpath_fc_args= ` ./$rpath_script `
200+ rm -f $rpath_script
201+ AC_MSG_RESULT([yes ($rpath_args + $rpath_fc_args )])],
176202 [WRAPPER_RPATH_SUPPORT= unnecessary
177203 AC_MSG_RESULT([yes (no extra flags needed)])])
178204
191217# If DT_RUNPATH is supported, then we'll use *both* the RPATH and
192218# RUNPATH flags in the LDFLAGS.
193219AC_DEFUN([OPAL_SETUP_RUNPATH],[
194- OPAL_VAR_SCOPE_PUSH([LDFLAGS_save])
220+ OPAL_VAR_SCOPE_PUSH([LDFLAGS_save rpath_script rpath_outfile wl_fc ])
195221
196222 AC_MSG_CHECKING([if linker supports RUNPATH])
197223 # Set the output in $runpath_args
@@ -205,6 +231,44 @@ AC_DEFUN([OPAL_SETUP_RUNPATH],[
205231 AC_MSG_RESULT([yes (-Wl,--enable-new-dtags)])],
206232 [AC_MSG_RESULT([no])])
207233 AC_LANG_POP([C])
234+ # Output goes into globally-visible $rpath_args. Run this in a
235+ # sub-process so that we don't pollute the current process
236+ # environment.
237+ rpath_script= conftest.$$ .sh
238+ rpath_outfile= conftest.$$ .out
239+ rm -f $rpath_script $rpath_outfile
240+ cat > $rpath_script << EOF
241+ #! /bin/sh
242+
243+ # Slurp in the libtool config into my environment
244+
245+ # Apparently, "libtoool --config" calls "exit", so we can't source it
246+ # (because if script A sources script B, and B calls "exit", then both
247+ # B and A will exit). Instead, we have to send the output to a file
248+ # and then source that.
249+ $OPAL_TOP_BUILDDIR /libtool --tag= FC--config > $rpath_outfile
250+
251+ chmod +x $rpath_outfile
252+ . ./$rpath_outfile
253+ rm -f $rpath_outfile
254+
255+ wl= " \` eval echo \$ wl\` "
256+ echo \$ wl
257+
258+ # Done
259+ exit 0
260+ EOF
261+ chmod +x $rpath_script
262+ wl_fc= ` ./$rpath_script `
263+ rm -f $rpath_script
264+
265+ LDFLAGS= " $LDFLAGS_save ${wl_fc} --enable-new-dtags"
266+ AC_LANG_PUSH([Fortran])
267+ AC_LINK_IFELSE([AC_LANG_SOURCE([[program test
268+ end program]])],
269+ [runpath_fc_args= " ${wl_fc} --enable-new-dtags"
270+ [runpath_fc_args= " "
271+ AC_LANG_POP([Fortran])
208272 LDFLAGS= $LDFLAGS_save
209273
210274 OPAL_VAR_SCOPE_POP
@@ -214,27 +278,31 @@ AC_DEFUN([OPAL_SETUP_RUNPATH],[
214278# for each of them. Then also add in an RPATH for @{libdir} (which
215279# will be replaced by the wrapper compile to the installdir libdir at
216280# runtime), and the RUNPATH args, if we have them.
217- AC_DEFUN([RPATHIFY_LDFLAGS ],[
281+ AC_DEFUN([RPATHIFY_LDFLAGS_INTERNAL ],[
218282 OPAL_VAR_SCOPE_PUSH([rpath_out rpath_dir rpath_tmp])
219283 AS_IF([test " $enable_wrapper_rpath " = " yes" && test " $WRAPPER_RPATH_SUPPORT " != " disabled" && test " $WRAPPER_RPATH_SUPPORT " != " unnecessary"
220284 rpath_out= " "
221285 for val in ${$1 } ; do
222286 case $val in
223287 -L* )
224288 rpath_dir=` echo $val | cut -c3-`
225- rpath_tmp=` echo $rpath_args | sed -e s@LIBDIR@$rpath_dir @`
289+ rpath_tmp=` echo ${ $2 } | sed -e s@LIBDIR@$rpath_dir @`
226290 rpath_out=" $rpath_out $rpath_tmp "
227291 ;;
228292 esac
229293 done
230294
231295 # Now add in the RPATH args for @{libdir}, and the RUNPATH args
232- rpath_tmp= ` echo $rpath_args | sed -e s/LIBDIR/@{libdir}/`
233- $1 = " ${$1 } $rpath_out $rpath_tmp $runpath_args "
296+ rpath_tmp= ` echo ${ $2 } | sed -e s/LIBDIR/@{libdir}/`
297+ $1 = " ${$1 } $rpath_out $rpath_tmp ${ $3 } "
234298 ])
235299 OPAL_VAR_SCOPE_POP
236300])
237301
302+ AC_DEFUN([RPATHIFY_LDFLAGS],[RPATHIFY_LDFLAGS_INTERNAL([$1 ], [rpath_args], [runpath_args])])
303+
304+ AC_DEFUN([RPATHIFY_FC_LDFLAGS],[RPATHIFY_LDFLAGS_INTERNAL([$1 ], [rpath_fc_args], [runpath_fc_args])])
305+
238306
239307dnl
240308dnl Avoid some repetitive code below
@@ -409,9 +477,12 @@ AC_DEFUN([OPAL_SETUP_WRAPPER_FINAL],[
409477
410478 AC_MSG_CHECKING([for OMPI LDFLAGS])
411479 OMPI_WRAPPER_EXTRA_LDFLAGS= " $ompi_mca_wrapper_extra_ldflags $wrapper_extra_ldflags $with_wrapper_ldflags "
480+ OMPI_WRAPPER_EXTRA_FC_LDFLAGS= $OMPI_WRAPPER_EXTRA_LDFLAGS
412481 RPATHIFY_LDFLAGS([OMPI_WRAPPER_EXTRA_LDFLAGS])
413482 AC_SUBST([OMPI_WRAPPER_EXTRA_LDFLAGS])
414483 AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LDFLAGS ])
484+ RPATHIFY_FC_LDFLAGS([OMPI_WRAPPER_EXTRA_FC_LDFLAGS])
485+ AC_SUBST([OMPI_WRAPPER_EXTRA_FC_LDFLAGS])
415486
416487 # Convert @{libdir} to ${libdir} for pkg-config
417488 _OPAL_SETUP_WRAPPER_FINAL_PKGCONFIG([OMPI])
@@ -420,6 +491,7 @@ AC_DEFUN([OPAL_SETUP_WRAPPER_FINAL],[
420491 OMPI_WRAPPER_EXTRA_LIBS= " $ompi_mca_wrapper_extra_libs "
421492 OPAL_FLAGS_APPEND_UNIQ([OMPI_WRAPPER_EXTRA_LIBS], [$wrapper_extra_libs ])
422493 OMPI_WRAPPER_EXTRA_LIBS= " $OMPI_WRAPPER_EXTRA_LIBS $with_wrapper_libs "
494+ OPAL_FLAGS_APPEND_UNIQ([OMPI_WRAPPER_EXTRA_LIBS], [$LIBS ])
423495 AC_SUBST([OMPI_WRAPPER_EXTRA_LIBS])
424496 AC_MSG_RESULT([$OMPI_WRAPPER_EXTRA_LIBS ])
425497
0 commit comments