btl tcp: Simplify modex address selection

Simplify selection of the address to publish for a given BTL TCP
module in the module exchange code.  Rather than looping through
all IP addresses associated with a node, looking for one that
matches the kindex of a module, loop over the modules and
use the address stored in the module structure.  This also
happens to be the address that the source will use to bind()
in a connect() call, so this should eliminate any confusion
(read: bugs) when an interface has multiple IPs associated with
it.

Refs #5818

Signed-off-by: Brian Barrett <[email protected]>

Author: bwbarrett

opal/mca/btl/tcp/btl_tcp_addr.h

@@ -33,40 +33,52 @@
 
 
 /**
- * Structure used to publish TCP connection information to peers.
+ * Modex address structure.
+ *
+ * One of these structures will be sent for every btl module in use by
+ * the local BTL TCP component.
  */
+struct mca_btl_tcp_modex_addr_t {
+    uint8_t     addr[16];       /* endpoint address.  for addr_family
+                                   of MCA_BTL_TCP_AF_INET, only the
+                                   first 4 bytes have meaning. */
+    uint32_t    addr_ifkindex;  /* endpoint kernel index */
+    uint16_t    addr_port;      /* endpoint listen port */
+    uint8_t     addr_family;    /* endpoint address family.  Note that
+                                   this is
+                                   MCA_BTL_TCP_AF_{INET,INET6}, not
+                                   the traditional
+                                   AF_INET/AF_INET6. */
+    uint8_t     padding[1];     /* padd out to an 8-byte word */
+};
+typedef struct mca_btl_tcp_modex_addr_t mca_btl_tcp_modex_addr_t;
 
+
+/**
+ * Remote peer address structure
+ *
+ * One of these structures will be allocated for every remote endpoint
+ * associated with a remote proc.  The data is pulled from the
+ * mca_btl_tcp_modex_addr_t structure, except for the addr_inuse
+ * field, which is local.
+ */
 struct mca_btl_tcp_addr_t {
-    /* the following information is exchanged between different
-       machines (read: byte order), so use network byte order
-       for everything and don't add padding
-    */
+    union {
+        struct in_addr  addr_inet;      /* IPv6 listen address */
 #if OPAL_ENABLE_IPV6
-    struct in6_addr addr_inet;    /**< IPv4/IPv6 listen address > */
-#else
-    /* Bug, FIXME: needs testing */
-    struct my_in6_addr {
-        union {
-            uint32_t u6_addr32[4];
-            struct _my_in6_addr {
-                struct in_addr _addr_inet;
-                uint32_t _pad[3];
-            } _addr__inet;
-        } _union_inet;
-    } addr_inet;
+        struct in6_addr addr_inet6;     /* IPv6 listen address */
 #endif
-    in_port_t      addr_port;     /**< listen port */
-    uint16_t       addr_ifkindex; /**< remote interface index assigned with
+    };
+    in_port_t   addr_port;     /**< listen port */
+    int         addr_ifkindex; /**< remote interface index assigned with
                                     this address */
-    unsigned short addr_inuse;    /**< local meaning only */
-    uint8_t        addr_family;   /**< AF_INET or AF_INET6 */
+    uint8_t     addr_family;   /**< AF_INET or AF_INET6 */
+    bool        addr_inuse;    /**< local meaning only */
 };
 typedef struct mca_btl_tcp_addr_t mca_btl_tcp_addr_t;
 
 #define MCA_BTL_TCP_AF_INET     0
-#if OPAL_ENABLE_IPV6
-# define MCA_BTL_TCP_AF_INET6   1
-#endif
+#define MCA_BTL_TCP_AF_INET6    1
 
 #endif
 

opal/mca/btl/tcp/btl_tcp_component.c

@@ -490,11 +490,59 @@ static int mca_btl_tcp_component_close(void)
  *  Create a btl instance and add to modules list.
  */
 
-static int mca_btl_tcp_create(int if_kindex, const char* if_name)
+static int mca_btl_tcp_create(const int if_kindex, const char* if_name)
 {
     struct mca_btl_tcp_module_t* btl;
     char param[256];
     int i;
+    struct sockaddr_storage addr;
+    bool found = false;
+
+    /*
+     * Look for an address on the given device (ie, kindex) which
+     * isn't disabled by the disable_family option.  If there isn't
+     * one, skip creating the modules for this interface.  We store
+     * the address on the module both to publish in the modex and to
+     * use as the source address of all packets sent by this module.
+     *
+     * This still isn't quite right.  Better would be to pull apart
+     * split_and_resolve and pass the address used to select the
+     * device into mca_btl_tcp_create().  This is a cleanup of the
+     * logic that's been in use for years, but the case it doesn't
+     * cover is (say) only specifing mca_btl_if_include 10.0.0.0/16
+     * when the interface has addresses of both 10.0.0.1 and 10.1.0.1;
+     * there's absolutely nothing that keeps this code from picking
+     * 10.1.0.1 as the one that is published in the modex and used for
+     * connection.
+     */
+    for (i = opal_ifbegin() ; i >= 0 ; i = opal_ifnext(i)) {
+        int ret;
+
+        if (if_kindex != opal_ifindextokindex(i)) {
+            continue;
+        }
+
+        ret = opal_ifindextoaddr(i, (struct sockaddr*)&addr,
+                                 sizeof(struct sockaddr_storage));
+        if (OPAL_SUCCESS != ret) {
+            return ret;
+        }
+
+        if (addr.ss_family == AF_INET &&
+            4 != mca_btl_tcp_component.tcp_disable_family) {
+            found = true;
+            break;
+        } else if (addr.ss_family == AF_INET6 &&
+                   6 != mca_btl_tcp_component.tcp_disable_family) {
+            found = true;
+            break;
+        }
+    }
+    /* if we didn't find an address that works for us on this
+       interface, just move on. */
+    if (!found) {
+        return OPAL_SUCCESS;
+    }
 
     for( i = 0; i < (int)mca_btl_tcp_component.tcp_num_links; i++ ) {
         btl = (struct mca_btl_tcp_module_t *)malloc(sizeof(mca_btl_tcp_module_t));
@@ -513,11 +561,7 @@ static int mca_btl_tcp_create(int if_kindex, const char* if_name)
         btl->tcp_send_handler = 0;
 #endif
 
-        /* save the address associated with this kindex in the module
-           to publish in the modex and use as the source of all packets
-           from this module */
-        opal_ifkindextoaddr(if_kindex, (struct sockaddr*)&btl->tcp_ifaddr,
-                            sizeof (struct sockaddr_storage));
+        memcpy(&btl->tcp_ifaddr, &addr, sizeof(struct sockaddr_storage));
 
         /* allow user to specify interface bandwidth */
         sprintf(param, "bandwidth_%s", if_name);
@@ -1117,97 +1161,64 @@ static int mca_btl_tcp_component_create_listen(uint16_t af_family)
 
 static int mca_btl_tcp_component_exchange(void)
 {
-     int rc = 0, index;
-     size_t i = 0;
-     size_t size = mca_btl_tcp_component.tcp_addr_count *
-                   mca_btl_tcp_component.tcp_num_links * sizeof(mca_btl_tcp_addr_t);
-     /* adi@2007-04-12:
-      *
-      * We'll need to explain things a bit here:
-      *    1. We normally have as many BTLs as physical NICs.
-      *    2. With num_links, we now have num_btl = num_links * #NICs
-      *    3. we might have more than one address per NIC
-      */
-     size_t xfer_size = 0; /* real size to transfer (may differ from 'size') */
-     size_t current_addr = 0;
-
-     if(mca_btl_tcp_component.tcp_num_btls != 0) {
-         char ifn[32];
-         mca_btl_tcp_addr_t *addrs = (mca_btl_tcp_addr_t *)malloc(size);
-         memset(addrs, 0, size);
-
-         /* here we start populating our addresses */
-         for( i = 0; i < mca_btl_tcp_component.tcp_num_btls; i++ ) {
-             for (index = opal_ifbegin(); index >= 0;
-                     index = opal_ifnext(index)) {
-                 struct sockaddr_storage my_ss;
-
-                 /* Look if the module's address belongs to this
-                  * kernel IP interface.  If not, go to next address.
-                  */
-                 if (opal_ifindextokindex (index) !=
-                     mca_btl_tcp_component.tcp_btls[i]->tcp_ifkindex) {
-                     continue;
-                 }
-
-                 opal_ifindextoname(index, ifn, sizeof(ifn));
-                 opal_output_verbose(30, opal_btl_base_framework.framework_output,
-                                     "btl: tcp: component_exchange: examining interface %s",
-                                     ifn);
-                 if (OPAL_SUCCESS !=
-                     opal_ifindextoaddr(index, (struct sockaddr*) &my_ss,
-                                        sizeof (my_ss))) {
-                     opal_output (0,
-                             "btl_tcp_component: problems getting address for index %i (kernel index %i)\n",
-                             index, opal_ifindextokindex (index));
-                     continue;
-                 }
+     int rc;
+     size_t i;
+     size_t num_btls = mca_btl_tcp_component.tcp_num_btls;
+     size_t size = num_btls * sizeof(mca_btl_tcp_modex_addr_t);
+     mca_btl_tcp_modex_addr_t *addrs;
+
+     if (num_btls <= 0) {
+         return 0;
+     }
+
+     addrs = (mca_btl_tcp_modex_addr_t*)malloc(size);
+     if (NULL == addrs) {
+         return OPAL_ERR_OUT_OF_RESOURCE;
+     }
+     memset(addrs, 0, size);
+
+     for (i = 0 ; i < num_btls ; i++) {
+         struct mca_btl_tcp_module_t *btl = mca_btl_tcp_component.tcp_btls[i];
+         struct sockaddr *addr = (struct sockaddr*)&(btl->tcp_ifaddr);
 
 #if OPAL_ENABLE_IPV6
-                 if ((AF_INET6 == my_ss.ss_family) &&
-                     (6 != mca_btl_tcp_component.tcp_disable_family)) {
-                     memcpy(&addrs[current_addr].addr_inet,
-                             &((struct sockaddr_in6*)&my_ss)->sin6_addr,
-                            sizeof(addrs[0].addr_inet));
-                     addrs[current_addr].addr_port =
-                         mca_btl_tcp_component.tcp6_listen_port;
-                     addrs[current_addr].addr_family = MCA_BTL_TCP_AF_INET6;
-                     xfer_size += sizeof (mca_btl_tcp_addr_t);
-                     addrs[current_addr].addr_inuse   = 0;
-                     addrs[current_addr].addr_ifkindex =
-                         opal_ifindextokindex (index);
-                     current_addr++;
-                     opal_output_verbose(30, opal_btl_base_framework.framework_output,
-                                         "btl: tcp: component_exchange: "
-                                         "%s IPv6 %s", ifn,
-                                         opal_net_get_hostname((struct sockaddr*)&my_ss));
-                 } else
+         if (AF_INET6 == addr->sa_family) {
+             struct sockaddr_in6 *inaddr6 = (struct sockaddr_in6*)addr;
+
+             memcpy(&addrs[i].addr, &(inaddr6->sin6_addr),
+                    sizeof(struct in6_addr));
+             addrs[i].addr_port = mca_btl_tcp_component.tcp6_listen_port;
+             addrs[i].addr_ifkindex = btl->tcp_ifkindex;
+             addrs[i].addr_family = MCA_BTL_TCP_AF_INET6;
+             opal_output_verbose(5, opal_btl_base_framework.framework_output,
+                                 "btl: tcp: exchange: %d %d IPv6 %s",
+                                 (int)i, btl->tcp_ifkindex,
+                                 opal_net_get_hostname(addr));
+         } else
 #endif
-                 if ((AF_INET == my_ss.ss_family) &&
-                     (4 != mca_btl_tcp_component.tcp_disable_family)) {
-                     memcpy(&addrs[current_addr].addr_inet,
-                            &((struct sockaddr_in*)&my_ss)->sin_addr,
-                            sizeof(struct in_addr));
-                     addrs[current_addr].addr_port =
-                         mca_btl_tcp_component.tcp_listen_port;
-                     addrs[current_addr].addr_family = MCA_BTL_TCP_AF_INET;
-                     xfer_size += sizeof (mca_btl_tcp_addr_t);
-                     addrs[current_addr].addr_inuse   = 0;
-                     addrs[current_addr].addr_ifkindex =
-                         opal_ifindextokindex (index);
-                     current_addr++;
-                     opal_output_verbose(30, opal_btl_base_framework.framework_output,
-                                         "btl: tcp: component_exchange: "
-                                         "%s IPv4 %s", ifn,
-                                         opal_net_get_hostname((struct sockaddr*)&my_ss));
-                 }
-             } /* end of for opal_ifbegin() */
-         } /* end of for tcp_num_btls */
-         OPAL_MODEX_SEND(rc, OPAL_PMIX_GLOBAL,
-                         &mca_btl_tcp_component.super.btl_version,
-                         addrs, xfer_size);
-         free(addrs);
-     } /* end if */
+         if (AF_INET == addr->sa_family) {
+             struct sockaddr_in *inaddr = (struct sockaddr_in*)addr;
+
+             memcpy(&addrs[i].addr, &(inaddr->sin_addr),
+                    sizeof(struct in_addr));
+             addrs[i].addr_port = mca_btl_tcp_component.tcp_listen_port;
+             addrs[i].addr_ifkindex = btl->tcp_ifkindex;
+             addrs[i].addr_family = MCA_BTL_TCP_AF_INET;
+             opal_output_verbose(5, opal_btl_base_framework.framework_output,
+                                 "btl: tcp: exchange: %d %d IPv4 %s",
+                                 (int)i, btl->tcp_ifkindex,
+                                 opal_net_get_hostname(addr));
+         } else {
+             BTL_ERROR(("Unexpected address family: %d", addr->sa_family));
+             return OPAL_ERR_BAD_PARAM;
+         }
+     }
+
+     OPAL_MODEX_SEND(rc, OPAL_PMIX_GLOBAL,
+                     &mca_btl_tcp_component.super.btl_version,
+                     addrs, size);
+     free(addrs);
+
      return rc;
 }