You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
11
+
that tells your phone who to start and run an operating system (like Android). Your device should be turned on.
12
+
Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
13
+
command: adb_reboot_download
14
+
- type: call_button
15
+
content: In this step, you need to flash a custom recovery on your device. Press 'Confirm and run' to start the process. Confirm afterwards to continue.
16
+
command: heimdall_flash_recovery
17
+
- type: confirm_button
18
+
img: samsung-buttons.png
19
+
content: >
20
+
Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power* for 8~10 seconds
21
+
until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
22
+
hold *Volume Up* + *Power button*.
23
+
install_os:
24
+
- type: call_button
25
+
content: >
26
+
In the next steps, you finally flash the selected OS image.
27
+
Connect your device with your computer with the USB-Cable.
28
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
29
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
11
+
that tells your phone who to start and run an operating system (like Android). Your device should be turned on.
12
+
Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
13
+
command: adb_reboot_download
14
+
- type: call_button
15
+
content: In this step, you need to flash a custom recovery on your device. Press 'Confirm and run' to start the process. Confirm afterwards to continue.
16
+
command: heimdall_flash_recovery
17
+
- type: confirm_button
18
+
img: samsung-buttons.png
19
+
content: >
20
+
Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
21
+
until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
22
+
hold *Volume Up* + *Home* + *Power button*.
23
+
install_os:
24
+
- type: call_button
25
+
content: >
26
+
In the next steps, you finally flash the selected OS image.
27
+
Connect your device with your computer with the USB-Cable.
28
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
29
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to unlock the bootloader. A bootloader is the piece of software, that tells your phone
10
+
how to start and run an operating system (like Android). Your device should be turned on.
11
+
- type: call_button
12
+
content: Press 'Confirm and run' to reboot into the bootloader.
13
+
command: adb_reboot_bootloader
14
+
- type: confirm_button
15
+
content: >
16
+
Select 'Restart bootloader' on your smartphone screen by pressing the volume button and the confirm by pushing the power button.
17
+
Then press 'Confirm and continue' here.
18
+
- type: call_button
19
+
content: In this step you actually unlock the bootloader. Just press 'Confirm and run' here. Once it's done, press continue here.
20
+
command: fastboot_unlock
21
+
- type: confirm_button
22
+
content: >
23
+
At this point the device may display on-screen prompts which will require interaction to continue the process of unlocking the bootloader.
24
+
Please take whatever actions the device asks you to to proceed.
25
+
- type: call_button
26
+
content: To finish the unlocking, the phone needs to reboot. Just press 'Confirm and run' here to reboot. Then continue.
27
+
command: fastboot_reboot
28
+
- type: confirm_button
29
+
content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
30
+
flash_recovery:
31
+
- type: confirm_button
32
+
content: >
33
+
Now you need to flash a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
34
+
adapting and repairing of the operating system.
35
+
- type: call_button
36
+
content: Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
37
+
command: adb_reboot_bootloader
38
+
- type: confirm_button
39
+
content: Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
40
+
- type: call_button
41
+
content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
42
+
command: fastboot_flash_recovery
43
+
install_os:
44
+
- type: call_button
45
+
content: >
46
+
In the next steps, you finally flash the selected OS image.
47
+
Wait until the TWRP screen appears. Then run the command.
48
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
49
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
11
+
that tells your phone who to start and run an operating system (like Android). Your device should be turned on.
12
+
Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
13
+
command: adb_reboot_download
14
+
- type: call_button
15
+
content: In this step, you need to flash a custom recovery on your device. Press 'Confirm and run' to start the process. Confirm afterwards to continue.
16
+
command: heimdall_flash_recovery
17
+
- type: confirm_button
18
+
img: samsung-buttons.png
19
+
content: >
20
+
Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
21
+
until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
22
+
hold *Volume Up* + *Bixby* + *Power button*.
23
+
install_os:
24
+
- type: call_button
25
+
content: >
26
+
In the next steps, you finally flash the selected OS image.
27
+
Connect your device with your computer with the USB-Cable.
28
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
29
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to unlock the bootloader. A bootloader is the piece of software, that tells your phone
10
+
how to start and run an operating system (like Android). Your device should be turned on.
11
+
- type: call_button
12
+
content: Press 'Confirm and run' to reboot into the bootloader.
13
+
command: adb_reboot_bootloader
14
+
- type: confirm_button
15
+
content: >
16
+
Select 'Restart bootloader' on your smartphone screen by pressing the volume button and the confirm by pushing the power button.
17
+
Then press 'Confirm and continue' here.
18
+
- type: call_button
19
+
content: In this step you actually unlock the bootloader. Just press 'Confirm and run' here. Once it's done, press continue here.
20
+
command: fastboot_unlock
21
+
- type: confirm_button
22
+
content: >
23
+
At this point the device may display on-screen prompts which will require interaction to continue the process of unlocking the bootloader.
24
+
Please take whatever actions the device asks you to to proceed.
25
+
- type: call_button
26
+
content: To finish the unlocking, the phone needs to reboot. Just press 'Confirm and run' here to reboot. Then continue.
27
+
command: fastboot_reboot
28
+
- type: confirm_button
29
+
content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
30
+
flash_recovery:
31
+
- type: confirm_button
32
+
content: >
33
+
Now you need to flash a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
34
+
adapting and repairing of the operating system.
35
+
- type: call_button
36
+
content: Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
37
+
command: adb_reboot_bootloader
38
+
- type: confirm_button
39
+
content: Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
40
+
- type: call_button
41
+
content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
42
+
command: fastboot_flash_recovery
43
+
install_os:
44
+
- type: call_button
45
+
content: >
46
+
In the next steps, you finally flash the selected OS image.
47
+
Wait until the TWRP screen appears. Then run the command.
48
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
49
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
11
+
that tells your phone who to start and run an operating system (like Android). Your device should be turned on.
12
+
Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
13
+
command: adb_reboot_download
14
+
- type: call_button
15
+
content: In this step, you need to flash a custom recovery on your device. Press 'Confirm and run' to start the process. Confirm afterwards to continue.
16
+
command: heimdall_flash_recovery
17
+
- type: confirm_button
18
+
img: samsung-buttons.png
19
+
content: >
20
+
Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 8~10 seconds
21
+
until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
22
+
hold *Volume Up* + *Home* + *Power button*.
23
+
install_os:
24
+
- type: call_button
25
+
content: >
26
+
In the next steps, you finally flash the selected OS image.
27
+
Connect your device with your computer with the USB-Cable.
28
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
29
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to unlock the bootloader. A bootloader is the piece of software, that tells your phone
10
+
how to start and run an operating system (like Android). Your device should be turned on.
11
+
- type: call_button
12
+
content: Press 'Confirm and run' to reboot into the bootloader.
13
+
command: adb_reboot_bootloader
14
+
- type: confirm_button
15
+
content: >
16
+
Select 'Restart bootloader' on your smartphone screen by pressing the volume button and the confirm by pushing the power button.
17
+
Then press 'Confirm and continue' here.
18
+
- type: call_button
19
+
content: In this step you actually unlock the bootloader. Just press 'Confirm and run' here. Once it's done, press continue here.
20
+
command: fastboot_unlock
21
+
- type: confirm_button
22
+
content: >
23
+
At this point the device may display on-screen prompts which will require interaction to continue the process of unlocking the bootloader.
24
+
Please take whatever actions the device asks you to to proceed.
25
+
- type: call_button
26
+
content: To finish the unlocking, the phone needs to reboot. Just press 'Confirm and run' here to reboot. Then continue.
27
+
command: fastboot_reboot
28
+
- type: confirm_button
29
+
content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
30
+
flash_recovery:
31
+
- type: confirm_button
32
+
content: >
33
+
Now you need to flash a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
34
+
adapting and repairing of the operating system.
35
+
- type: call_button
36
+
content: Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
37
+
command: adb_reboot_bootloader
38
+
- type: confirm_button
39
+
content: Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
40
+
- type: call_button
41
+
content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
42
+
command: fastboot_flash_recovery
43
+
install_os:
44
+
- type: call_button
45
+
content: >
46
+
In the next steps, you finally flash the selected OS image.
47
+
Wait until the TWRP screen appears. Then run the command.
48
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
49
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
As a first step, you need to unlock the bootloader. A bootloader is the piece of software, that tells your phone
10
+
how to start and run an operating system (like Android). Your device should be turned on.
11
+
- type: call_button
12
+
content: Press 'Confirm and run' to reboot into the bootloader.
13
+
command: adb_reboot_bootloader
14
+
- type: confirm_button
15
+
content: >
16
+
Select 'Restart bootloader' on your smartphone screen by pressing the volume button and the confirm by pushing the power button.
17
+
Then press 'Confirm and continue' here.
18
+
- type: call_button
19
+
content: In this step you actually unlock the bootloader. Just press 'Confirm and run' here. Once it's done, press continue here.
20
+
command: fastboot_unlock
21
+
- type: confirm_button
22
+
content: >
23
+
At this point the device may display on-screen prompts which will require interaction to continue the process of unlocking the bootloader.
24
+
Please take whatever actions the device asks you to to proceed.
25
+
- type: call_button
26
+
content: To finish the unlocking, the phone needs to reboot. Just press 'Confirm and run' here to reboot. Then continue.
27
+
command: fastboot_reboot
28
+
- type: confirm_button
29
+
content: The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
30
+
flash_recovery:
31
+
- type: confirm_button
32
+
content: >
33
+
Now you need to flash a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
34
+
adapting and repairing of the operating system.
35
+
- type: call_button
36
+
content: Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
37
+
command: adb_reboot_bootloader
38
+
- type: confirm_button
39
+
content: Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
40
+
- type: call_button
41
+
content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
42
+
command: fastboot_flash_recovery
43
+
install_os:
44
+
- type: call_button
45
+
content: >
46
+
In the next steps, you finally flash the selected OS image.
47
+
Wait until the TWRP screen appears. Then run the command.
48
+
This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored
49
+
in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
0 commit comments