sync cheeseburger asserts

* taken from https://github.com/LineageOS/android_device_oneplus_cheeseburger/blob/093e9c7fa2e974092730b34b6390d32a2a124465/BoardConfig.mk#L14

Signed-off-by: SirRGB <[email protected]>

Author: SirRGB

openandroidinstaller/assets/configs/akari.yaml

@@ -2,9 +2,9 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Sony Xperia XZ2
   is_ab_device: true
-  device_code: akari 
+  device_code: akari
   supported_device_codes:
-    - akari 
+    - akari
 requirements:
   android: 10
 steps:
@@ -21,7 +21,7 @@ steps:
     - type: link_button_with_confirm
       content: >
         Click on the button to open the instructions on Sonys official unlocking website to generate an unlock code for your bootloader.
-        Once you got the code write it down somewhere and continue to input the code. 
+        Once you got the code write it down somewhere and continue to input the code.
       link: https://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
     - type: confirm_button
       content: >
@@ -37,7 +37,7 @@ steps:
       command: fastboot_unlock_with_code
     - type: call_button
       content: >
-        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue. 
+        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue.
         Connect your device to your PC via USB. Then confirm here to continue.
       command: fastboot_reboot
   boot_recovery:
@@ -59,4 +59,4 @@ steps:
     - type: call_button
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-      command: fastboot_flash_boot
+      command: fastboot_flash_boot

openandroidinstaller/assets/configs/avicii.yaml

@@ -25,7 +25,7 @@ steps:
         Once it's done, press continue here.
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: > 
+      content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
   boot_recovery:
     - type: call_button
@@ -37,7 +37,7 @@ steps:
     - type: call_button
       content: >
         Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
+
         Note : If you have not selected additional partitions it will do nothing and is save to continue.
       command: fastboot_flash_additional_partitions
     - type: call_button
@@ -54,4 +54,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/bacon.yaml

@@ -21,12 +21,12 @@ steps:
       content: >
         In this step you actually unlock the bootloader. Just press 'Confirm and run' here. The phone will automatically reboot and reformat.
         Once it's done, press continue here.
-        
+
         Notice: If you don't have the stock OnePlus One recovery, your device might boot into your custom recovery, but don't do anything / throw an error.
         If this appears, reboot you device through your bootloader and just continue normally. (Your bootloader will be unlocked.)
       command: fastboot_oem_unlock
     - type: confirm_button
-      content: > 
+      content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable Developer Options and USB debugging to continue.
         You don't need to re-enable those options, if you have a custom recovery. (See last step.)
         When you are done, press continue.
@@ -41,4 +41,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/barbet.yaml

@@ -2,9 +2,9 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Pixel 5a
   is_ab_device: true
-  device_code: barbet 
+  device_code: barbet
   supported_device_codes:
-    - barbet 
+    - barbet
 requirements:
   android: 12.1.0
 steps:
@@ -37,7 +37,7 @@ steps:
       content: >
         The bootloader is now unlocked. Since the device resets completely, you will need to re-enable USB debugging to continue.
   boot_recovery:
-    - type: confirm_button 
+    - type: confirm_button
       content: >
         Now you need to boot a custom recovery system on the phone. A recovery is a small subsystem on your phone, that manages updating,
         adapting and repairing of the operating system.
@@ -52,4 +52,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/beyond0lte.yaml

@@ -2,7 +2,7 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy S10e
   is_ab_device: false
-  device_code: beyond0lte 
+  device_code: beyond0lte
   supported_device_codes:
     - beyond0lte
     - beyond0
@@ -28,7 +28,7 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on. 
+        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on.
         Then press 'Confirm and run' to reboot into download mode. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -39,6 +39,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Bixby* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/beyond1lte.yaml

@@ -1,8 +1,8 @@
 metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy S10
-  is_ab_device: false 
-  device_code: beyond1lte 
+  is_ab_device: false
+  device_code: beyond1lte
   supported_device_codes:
     - beyond1lte
     - beyond1
@@ -28,7 +28,7 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on. 
+        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on.
         Then press 'Confirm and run' to reboot into download mode. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -39,6 +39,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
-        hold *Volume Up* + *Bixby* + *Power button*.
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
+        hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/beyond2lte.yaml

@@ -2,9 +2,9 @@ metadata:
   maintainer: Tobias Sterbak (tsterbak)
   device_name: Samsung Galaxy S10+
   is_ab_device: false
-  device_code: beyond2lte 
+  device_code: beyond2lte
   supported_device_codes:
-    - beyond2lte 
+    - beyond2lte
     - beyond2
 requirements:
   android: 12
@@ -28,7 +28,7 @@ steps:
   boot_recovery:
     - type: call_button
       content: >
-        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on. 
+        Now plug the USB-cable to your device. As a first step, you need to boot into download mode. Your device should be turned on.
         Then press 'Confirm and run' to reboot into download mode. Continue once it's done.
       command: adb_reboot_download
     - type: call_button
@@ -39,6 +39,6 @@ steps:
     - type: confirm_button
       img: samsung-buttons-bixby.png
       content: >
-        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds 
-        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Bixby* for 8~10 seconds
+        until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off,
         hold *Volume Up* + *Bixby* + *Power button*.

openandroidinstaller/assets/configs/cedric.yaml

@@ -7,12 +7,12 @@ metadata:
     - cedric
 steps:
   unlock_bootloader:
-    - type: call_button 
+    - type: call_button
       command: adb_reboot_bootloader
       content: >
         As a first step, you need to unlock the bootloader of your device. A bootloader is the piece of software, that tells your phone
         how to start and run an operating system (like Android). You need to boot into fastboot mode by pressing the 'Confirm and run' button. Then continue.
-    - type: call_button 
+    - type: call_button
       command: fastboot_get_unlock_data
       content: >
         Now you need to get your device ID to get an unlock code from Motorola. Press 'Confirm and run' to get the ID. (You need to toggle 'Advanced Output' here to see it.)
@@ -35,7 +35,7 @@ steps:
       command: fastboot_unlock_with_code
     - type: call_button
       content: >
-        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue. 
+        Press the button to reboot. Since the device resets completely, you will need to re-enable USB debugging to continue.
         Connect your device to your PC via USB. Then confirm here to continue.
       command: fastboot_reboot
   boot_recovery:
@@ -49,4 +49,4 @@ steps:
       img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_boot_recovery
+      command: fastboot_boot_recovery

openandroidinstaller/assets/configs/cheeseburger.yaml

@@ -6,6 +6,7 @@ metadata:
   supported_device_codes:
     - cheeseburger
     - OnePlus5
+    - oneplus5
   twrp-link: cheeseburger_dumpling
 requirements:
   android: 10