Added TWRP image to every config

MagicLike · MagicLike · commit c7f998b849a9 · 2023-03-24T22:18:37.000+01:00
diff --git a/openandroidinstaller/assets/configs/FP2.yaml b/openandroidinstaller/assets/configs/FP2.yaml
@@ -16,6 +16,7 @@ steps:
         Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/FP3.yaml b/openandroidinstaller/assets/configs/FP3.yaml
@@ -45,6 +45,7 @@ steps:
         Turn on your device. Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Once the device is in fastboot mode, flash the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/FP4.yaml b/openandroidinstaller/assets/configs/FP4.yaml
@@ -45,6 +45,7 @@ steps:
         Turn on your device. Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Once the device is in fastboot mode, boot the custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/avicii.yaml b/openandroidinstaller/assets/configs/avicii.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
@@ -43,6 +44,7 @@ steps:
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/bacon.yaml b/openandroidinstaller/assets/configs/bacon.yaml
@@ -37,6 +37,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/barbet.yaml b/openandroidinstaller/assets/configs/barbet.yaml
@@ -48,6 +48,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/cedric.yaml b/openandroidinstaller/assets/configs/cedric.yaml
@@ -44,6 +44,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/cheeseburger.yaml b/openandroidinstaller/assets/configs/cheeseburger.yaml
@@ -34,6 +34,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/coral.yaml b/openandroidinstaller/assets/configs/coral.yaml
@@ -46,6 +46,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/dre.yaml b/openandroidinstaller/assets/configs/dre.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
@@ -43,6 +44,7 @@ steps:
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/dumpling.yaml b/openandroidinstaller/assets/configs/dumpling.yaml
@@ -34,5 +34,6 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/enchilada.yaml b/openandroidinstaller/assets/configs/enchilada.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
@@ -43,6 +44,7 @@ steps:
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/evert.yaml b/openandroidinstaller/assets/configs/evert.yaml
@@ -44,6 +44,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -53,6 +54,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/fajita.yaml b/openandroidinstaller/assets/configs/fajita.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
     - type: call_button
@@ -43,6 +44,7 @@ steps:
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
+      img: twrp-start.jpeg
       command: fastboot_boot_recovery
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
diff --git a/openandroidinstaller/assets/configs/flame.yaml b/openandroidinstaller/assets/configs/flame.yaml
@@ -48,6 +48,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/griffin.yaml b/openandroidinstaller/assets/configs/griffin.yaml
@@ -45,6 +45,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/guacamole.yaml b/openandroidinstaller/assets/configs/guacamole.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/guacamoleb.yaml b/openandroidinstaller/assets/configs/guacamoleb.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/hotdog.yaml b/openandroidinstaller/assets/configs/hotdog.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/hotdogb.yaml b/openandroidinstaller/assets/configs/hotdogb.yaml
@@ -35,6 +35,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/kiev.yaml b/openandroidinstaller/assets/configs/kiev.yaml
@@ -45,6 +45,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -54,6 +55,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/nairo.yaml b/openandroidinstaller/assets/configs/nairo.yaml
@@ -44,6 +44,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -53,6 +54,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/ocean.yaml b/openandroidinstaller/assets/configs/ocean.yaml
@@ -44,6 +44,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -53,6 +54,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/racer.yaml b/openandroidinstaller/assets/configs/racer.yaml
@@ -45,6 +45,7 @@ steps:
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
@@ -54,6 +55,7 @@ steps:
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
       command: adb_twrp_copy_partitions
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/redfin.yaml b/openandroidinstaller/assets/configs/redfin.yaml
@@ -48,6 +48,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
diff --git a/openandroidinstaller/assets/configs/sunfish.yaml b/openandroidinstaller/assets/configs/sunfish.yaml
@@ -48,6 +48,7 @@ steps:
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
     - type: call_button
+      img: twrp-start.jpeg
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
