Add preliminary config for Samsung Galaxy S III Neo (s3ve3g)

Author: tsterbak

openandroidinstaller/assets/configs/s3ve3g.yaml

@@ -0,0 +1,45 @@
+metadata:
+  maintainer: Tobias Sterbak (tsterbak)
+  devicename: Samsung Galaxy S III Neo
+  devicecode: s3ve3g 
+steps:
+  unlock_bootloader:
+  flash_recovery:
+    - type: confirm_button
+      content: >
+        There are two possible hardware configurations of this phone regardless of model number. Some phones were released with a Sony IMX 175 rear camera sensor, while others with a Samsung s5k4h5yb rear camera sensor. As such, we’ve separated this devices builds into two separate builds. The procedure to distinguish which to use is as follows:
+        
+        - Make sure to be on the latest stock firmware of your variant (you can check updates with Settings, Updates);
+
+        - Make sure the rear camera is working on the stock ROM;
+
+        - Open the phone app and dial *#*#34971539#*#* to access to the hidden menu;
+          - Tap on ‘Phone/Cam FW Check’ and take note of the numbers shown in the notification:
+          - For E08QT, install the s3ve3gjv builds
+          - For B08QT, install the s3ve3gxx builds
+        I you are not sure what you used, you can safely restart here and pick the correct image and recovery.
+    - type: call_button
+      content: >
+        As a first step, you need to boot into the bootloader. A bootloader is the piece of software,
+        that tells your phone who to start and run an operating system (like Android). Your device should be turned on.
+        Then press 'Confirm and run' to reboot into the bootloader. Continue once it's done.
+      command: adb_reboot_download
+    - type: call_button
+      content: >
+        In this step, you need to flash a custom recovery on your device.
+        Press 'Confirm and run' to start the process. Confirm afterwards to continue.
+      command: heimdall_flash_recovery
+    - type: confirm_button
+      img: samsung-buttons.png
+      content: >
+        Unplug the USB cable from your device. Then manually reboot into recovery by pressing the *Volume Down* + *Power buttons* for 
+        8~10 seconds until the screen turns black & release the buttons immediately when it does, then boot to recovery with the device powered off, 
+        hold *Volume Up* + *Home* + *Power*. Confirm when the recovery screen appears.
+  install_os:
+    - type: call_button 
+      content: >
+        In the next steps, you finally flash the selected OS image.
+        Connect your device with your computer with the USB-Cable.
+        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
+        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
+      command: adb_twrp_wipe_and_install