Addressed review comments

Signed-off-by: Marikkannu, Suresh <[email protected]>

Author: sureshmarikkannu

onramp/blueprints.rst

@@ -849,18 +849,18 @@ To deploy the srsRAN blueprint in simulation mode, run the following:
    $ make srsran-gnb-install
    $ make srsran-uesim-start
 
-Multihop gNB's
+Multihop gNBs
 ~~~~~~~~~~~~~~~~~~~~~~
 
-By default OnRamp uses isolated networks for the N3(ex: 192.168.252.x) and
-N6(ex: 192.168.250.x) interfaces. This prevents gNB(which is on different
-subnet and located multiple hops away) connecting to the UPF on N3 interface.
+By default OnRamp uses isolated networks for the N3(i.e., 192.168.252.x) and
+N6(i.e., 192.168.250.x) interfaces. This prevents gNB, which is on different
+subnet and located multiple hops away, connecting to the UPF on N3 interface.
 
 In order to support such deployment OnRamp provides an option to configure
 N3 IP from the same subnet as DATA_IFACE. It can be enabled by setting
 ``core.upf.multihop_gnb: true``
 
-For ex, lets say the DATA_IFACE subnet is 10.21.61.0/24 and gNB subnet
+For example, let's say the DATA_IFACE subnet is 10.21.61.0/24 and gNB subnet
 is 10.202.1.0/24. Configure the parameters as follows,
 
 .. code-block::
@@ -877,9 +877,9 @@ is 10.202.1.0/24. Configure the parameters as follows,
           core:   "192.168.250.3"
         ue_ip_pool: "172.250.0.0/16"
 
-In case if we need to connect multiple gNB's (gNB2 subnet: 10.203.1.0/24)
+In case we need to connect multiple gNBs (gNB2 subnet: 10.203.1.0/24)
 from different subnet then add routes as follows
-in ``deps/5gc/roles/core/templates/sdcore-5g-values.yaml`` ``(if core.upf.mode: af_packet)``:
+in ``deps/5gc/roles/core/templates/sdcore-5g-values.yaml`` ``(if core.upf.mode: af_packet)``, or
 in ``deps/5gc/roles/core/templates/sdcore-5g-sriov-values.yaml`` ``(if core.upf.mode: dpdk)``:
 
 .. code-block::