OSDOCS#7810: Added ppc64le and s390x as supported architectures

Author: mjpytlak

installing/installing-preparing.adoc

@@ -83,11 +83,11 @@ If you need to install your cluster that has limited access to the internet, suc
 If you need to deploy your cluster to an xref:../installing/installing_aws/installing-aws-government-region.adoc#installing-aws-government-region[AWS GovCloud region], xref:../installing/installing_aws/installing-aws-china.adoc#installing-aws-china-region[AWS China region], or xref:../installing/installing_azure/installing-azure-government-region.adoc#installing-azure-government-region[Azure government region], you can configure those custom regions during an installer-provisioned infrastructure installation.
 
 ifndef::openshift-origin[]
-You can also configure the cluster machines to use xref:../installing/installing-fips.adoc#installing-fips[FIPS Validated / Modules in Process cryptographic libraries] during installation.
+You can also configure the cluster machines to use the {op-system-base} cryptographic libraries that have been submitted to NIST for xref:../installing/installing-fips.adoc#installing-fips[FIPS 140-2/140-3 Validation] during installation.
 
 [IMPORTANT]
 ====
-The use of FIPS Validated / Modules in Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64` architecture.
+When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 
 endif::[]

modules/agent-installer-fips-compliance.adoc

@@ -12,5 +12,5 @@ Federal Information Processing Standards (FIPS) compliance is one of the most cr
 
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====

modules/installation-aws-config-yaml.adoc

@@ -372,7 +372,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <14> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]
@@ -388,7 +388,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <12> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]

modules/installation-azure-config-yaml.adoc

@@ -241,7 +241,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <15> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]
@@ -255,7 +255,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <16> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]
@@ -269,7 +269,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <17> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]
@@ -283,7 +283,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <11> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]

modules/installation-azure-stack-hub-config-yaml.adoc

@@ -95,7 +95,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <12> If your Azure Stack Hub environment uses an internal certificate authority (CA), add the necessary certificate bundle in `.pem` format.
 <13> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
@@ -188,7 +188,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 <14> You can optionally provide the `sshKey` value that you use to access the machines in your cluster.
 endif::openshift-origin[]

modules/installation-bare-metal-agent-installer-config-yaml.adoc

@@ -96,7 +96,7 @@ platform:
 +
 [IMPORTANT]
 ====
-The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 
 <12> This pull secret allows you to authenticate with the services that are provided by the included authorities, including Quay.io, which serves the container images for {product-title} components.

modules/installation-bare-metal-config-yaml.adoc

@@ -255,7 +255,7 @@ ifndef::openshift-origin[]
 +
 [IMPORTANT]
 ====
-To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. The use of FIPS validated or Modules In Process cryptographic libraries is only supported on {product-title} deployments on the `x86_64`, `ppc64le`, and `s390x` architectures.
+To enable FIPS mode for your cluster, you must run the installation program from a {op-system-base-full} computer configured to operate in FIPS mode. For more information about configuring FIPS mode on RHEL, see link:https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/9/html/security_hardening/assembly_installing-the-system-in-fips-mode_security-hardening[Installing the system in FIPS mode]. When running {op-system-base-full} or {op-system-first} booted in FIPS mode, {product-title} core components use the {op-system-base} cryptographic libraries that have been submitted to NIST for FIPS 140-2/140-3 Validation on only the x86_64, ppc64le, and s390x architectures.
 ====
 endif::openshift-origin[]
 ifndef::restricted[]